Intex pools -- the same as with all other swimming pools -- require a filter, pump and the appropriate chemicals, such as chlorine, to keep the pool water clean and sanitary for swimmers. Cleaning tools such as brushes, nets and skimmers should be used to keep the sides and surface of the pool free of algae and debris.
Don't bother running electric for an intex pool. They're meant to be temporary structures. Without a pump/filter using your vacuum to move around the water is your best bet.
You can do your own pool work, including using chlorine--even without a filter.
To keep the pool clean without a filter, it is necessary to use chlorine with a flocculant or to use a flocculant chemical. This product groups the impurities that float in the water, causing them to fall to the bottom of the pool so that they can be removed later with a cleaner.
The short answer to this is YES, it is OK to run your pool pump without the filter cartridge installed.
Your pool can keep running for a few days with no problems while without a pump. However, know that a standard pool needs a pool running for at least once in 24 hours, or you might notice an algae bloom. So, it's best to have your pump ready as soon as possible.
In a neglected pool, debris may build up and clog the pool's drain or filter. A mucked up drain that is left untended and unfixed may ultimately weaken and damage the pools' motors.
All other types of Intex swimming pools do not require an air pump.
If you are without power, grab your pool brush! Not only will scrubbing the sides and bottom reduce or prevent algae, it also causes the water to move and circulate, helping maintain an even level of chlorine throughout the pool.
Without a filter you will only be circulating dead algae, debris and other killed bacteria inside your pools water. The filter cleans the water by removing the unwanted particles, grass, leaves and other debris that is floating in the water. Without a filter it will start to become cloudy and dirty.
Filtering the water in your pool.
Dust and debris fall into your pool water or are blown in by the wind or gets carried in by bathers. The job of the pool filtration system is to get that dirt out and helps leave your pool water sparkling and clear.
Can You Maintain A Pool Without A Pump. The short answer is yes. While pool pumps help circulate water to keep it free from bacteria and algae, it is possible to clean a pool without a pump.
They often include a ground cover and debris cover. Intex pools often include cartridge filters and pumps as well, which makes it easy to get swimming sooner.
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
Brushing thoroughly 1-2 times per week will prevent these materials from having the time to create a stain. Brush to Prevent Algae: Every pool can grow algae, but plaster, quartz, and aggregate finishes are more susceptible.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Although inflatable pools don't need to use chlorine, it's one of the most common ways to keep pool water sanitary and safe to swim in. The chlorine is used to efficiently kill bacteria in the water that may be harmful to swimmers.
“It's important to change the paddling pool water every day – drain it and let it dry at the end of the day and use an anti-bacterial spray to kill any germs so it is safe to use the next day.”
For most inflatable pools or plastic kiddie pools following the guidelines listed above, the water should be changed every two weeks at a minimum. If you are not adding chlorine to kill bacteria, drain the pool every other day. Stagnant water without chlorine can become unhealthy water in as little as 24-48 hours.
You can use either a chlorinated product or a non-chlorine shock oxidizer to break down combined chlorine in the water. Shocking the pool can also remove excess bather waste and visible algae. Shocking should be done when combined chlorine levels exceed 0.5 ppm.
Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.