If your engineered hardwood starts to appear dull, it can easily be refreshed with a recoating. The National Wood Floors Association recommends adding a new coat of finish every three to five years and to completely sand and refinish every few decades, depending on the wear and tear.
Remember, your engineered flooring is cared for mostly the same as you would for hardwood floors since the uppermost wear layer is comprised solely of hardwood. Always sweep or dust before you mop. Remove as much dirt and debris before mopping to avoid damaging your floors. Clean up spills as soon as possible.
I would say engineered oak should always be oiled. It leaves a much nicer finish in terms of the grain. You can patch up damage easier as well.
To sum it all up: Daily sweeping and mopping with a damp cloth will keep your flooring looking like new. Remember to deep clean occasionally, but avoid using too much water on your wood floors.
Damp Cleaning Guidelines:
Damp cleaning is recommended using a Swiffer wet jet system or a Bona moistened cleaner pad (not spray on the floor). The moistened pad should be pH 7 neutral. Avoid using Swiffer pre-treated moistened pads and other cleaners with non-neutral pH levels.
An engineered wood floor that is untreated will not only be succeptible to moisture ingress and water damage but also to scratching and marking.
Your urethane-coated engineered hardwood floor is very easy to maintain. Use a quality wood flooring cleaner, such as those manufactured by Bona and a specialty cloth flooring mop available from flooring retailers.
While engineered hardwood is more moisture-resistant than solid hardwood, it's not completely waterproof. Long exposure to standing water or high humidity levels can result in issues such as warping, swelling, and discoloration.
Thanks to the composition of engineered flooring, which consists of multiple core pieces of plywood, HDF, or softwood, topped off with a beautiful layer of hardwood, it means that engineered flooring can last for up to 30 years in the right conditions.
So, what's the ballpark lifespan of engineered hardwood flooring? On average, you can expect engineered hardwood floors to last between 20 and 30 years.
Both materials show good resistance to scratches and impacts. Vinyl flooring is more water-resistant and suitable for wet areas, while engineered wood flooring offers great stability and can be sanded to maintain its appearance over time.
Installing engineered hardwood flooring in a 1000 square foot space typically ranges from $6,000 to $12,000. The average cost lands around $9,000. This includes both materials and labor, but factors like the type of wood and installation complexity can influence the final price.
The answer is yes, but carefully – very carefully. Ensure you mop is thoroughly squeezed of excess water – we must stress, use a damp mop only. You do not want to saturate your engineered timber with water as that's not what it's designed for. Too much water on engineered timber can cause it to warp.
Refinishing involves sanding down the top layer and applying a new finish. This process will leave your floor almost good as new and you can even change the colour of your floor completely in this process! Refinishing should be done by a professional to achieve the best results and avoid damage to your floor.
Most engineered hardwood often comes pre-finished and does not need to be sealed. However, if you would like to add an extra layer of protection from water leaks and spills, you can add a seal to engineered wood. Sealing your floor will keep the floors intact for longer.
You can use Swiffer® wet pads on engineered hardwood. They can clean most flooring surfaces. Can you use Bona® on engineered hardwood? Bona® is a popular and safe choice for cleaning engineered hardwood floors.
Plank warping, buckling, or swelling are clear physical signs that moisture has infiltrated your engineered hardwood floors, creating conditions conducive to mold growth.
Damp mop periodically: Depending on the level of activity and soil accumulation, damp mop the floors with a well-wrung, slightly dampened microfiber mop or cloth every few weeks or as needed. Use a manufacturer-recommended hardwood floor cleaner or a mild solution of water and pH-neutral cleaner.
Yes, Bona Hardwood Floor Cleaner is recommended for use on engineered hardwood floors, as well as all unwaxed, unoiled, polyurethane finished wood floors.
Q: Can Pine Sol be safely used on hardwood floors, including engineered hardwood? A: While Pine Sol is a popular household cleaner, using it on hardwood floors, especially engineered hardwood, may not be recommended as it can leave a residue that could potentially damage the finish over time.
Instructions for How To Clean Engineered Hardwood Floors:
Prior to mopping, vacuum your floors to remove dirt, debris and dust first. Pour in a splash of dishwashing soap into the spray bottle (about 1/4 teaspoon). Fill up spray bottle with lukewarm or hot water.
The Harder the Wood, the Less Susceptible it is to Your Dog's Nails. Remember, even though engineered hardwood is less susceptible to scratching, it still features a real hardwood veneer. So you'll still have worries about scratching and denting.
The typical lifespan of engineered hardwood flooring ranges from 20 to 30 years or more, depending on factors such as the quality of materials, installation process, maintenance routines, and environmental conditions. Suppose you take good care of high-quality engineered hardwood floors with thicker wear layers.