Because of its corrosive nature, Drano can cause toilet bowls to crack, PVC pipes to melt or break and the glue that holds pipes together can be eaten away. If any of these things happen, you're going to be left with an inoperable plumbing system and costly repairs.
Drano Max Gel Clog Remover comes in 80-ounce bottles, and it's safe to use on PVC, metal pipes, garbage disposals, and septic systems. Its thick formula cuts through standing water, allowing it to quickly dissolve any clogs, including those caused by hair and soap scum.
Chemicals such as sodium hydroxide or hydrochloric acid are used in the majority of PVC pipe cleaning techniques.
Drano Max Gel Clog Remover comes in 80-ounce bottles, and it's safe to use on PVC, metal pipes, garbage disposals, and septic systems. Its thick formula cuts through standing water, allowing it to quickly dissolve any clogs, including those caused by hair and soap scum.
No. The active component, sodium hydroxide in Liquid Plumber, Drano, etc, is a hazard to YOU, potentially chemically burning your skin and more dangerously your eyes, but it doesn't effect PVC nor ABS drainage pipes. It's used (versus strong acids) because it doesn't corrode metal pipes which acids would.
Spray the pipe with a household cleaner, such as Windex™, or another all-purpose cleaner, such as 409™. Allow the cleaner to soak on the surface of the pipe.
Leaving Drano in the drain for too long can also harm the environment. When the product is left in the drain, it can enter the water supply and make its way into rivers and streams. This can be hazardous to plant and animal life and contaminate drinking water.
Hydrochloric Acid (Muriatic Acid)
Properties and Uses: Hydrochloric acid, also known as muriatic acid, is a highly corrosive acid used extensively by plumbers to clear severe clogs. It reacts rapidly with organic materials in drains, breaking them down into simpler compounds that can be easily flushed away.
This is a big deal when you live in a home with a septic system. We were always hesitant to use certain products in the past and Green Gobbler's products truly give us peace of mind. The Green Gobbler Drain Clog Dissolverdoes not contain bleach or sodium hydroxide, and it's safe for PVC and copper pipes.
Mix 1/3rd of a cup of bicarbonate of soda with 1/3rd of a cup of vinegar in a measuring cup. It will fizz immediately, and you should waste no time pouring it down the clogged drain. The fizzing action will help to remove the gunk, hair, and grime that has built up in the blocked drain pipe.
The dissolution temperature of PVC in methyl ethyl ketone is 110 to 120 °C. On the other hand, THF is more efficient in dissolving PVC even at room temperature. Cyclohexanone and cyclopentanone are also good solvents for PVC but at 40 °C.
While harmless for most metal and PVC pipes, prolonged exposure to the acidic nature of vinegar might corrode certain metals, like copper. PVC pipes, on the other hand, can withstand these substances without damage.
Plumbers unanimously encourage homeowners not to use Drano due to its corrosive nature. The chemicals in Drano can erode not only the clogged material causing the blockage but will also quickly eat away at the metal plumbing pipes themselves, causing more harm than good.
One of the most effective options for clearing a partially clogged sink or shower drain is to use vinegar and baking soda. You will want to pour around a cup or two of each down the drain and then let it sit for 20 to 30 minutes.
Drano® products are powerful enough to dissolve nasty clogs, but they will not harm your plastic or metal pipes, so there's no need to worry.
1. Enzyme-Based Drain Cleaners. Enzyme-based drain cleaners are a safe and effective option for cleaning clogs in plastic pipes. These cleaners use natural enzymes to break down organic materials, such as grease, hair, and soap scum, that can cause blockages.
Liquid drain cleaners work by inducing chemical reactions meant to dissolve organic materials. However, these reactions can generate excessive heat that weakens the seals in PVC pipes, making them particularly bad for these types of pipes.
The fizzing reaction and gas created may help loosen some small blockages. However, it is not typically strong enough to break down larger clogs or remove hard-to-reach debris. As a result of the above facts, if you have a serious drain clog, using baking soda and vinegar is unlikely to be effective.
Drain snakes also called drain rooters or augers, use a long cable with a spiral-shaped head.
Some of the best Drano alternatives include using a plunger or pipe snake, soap or salt mixed with boiling water, or baking soda and white vinegar. Also, for maximum effectiveness, you can combine several of these methods together to get rid of the clog.
For preventive drain cleaning, you can use Drano® Max Build-Up Remover in drains, toilets and even septic systems. Apply Drano® Max Build-Up Remover overnight or before you go to work, then wait 6 to 8 hours before running warm (not hot) water down treated drains or flushing treated toilets.
When Drano won't go down the drain, grab a plunger instead. Many people think that these are only good for toilets. However, they can create suction that can dislodge your clog. Make sure that you get a plunger that can seal all the way around your drain.