Yes. Dawn dish soap, known for its grease-fighting capabilities, can effectively remove sticker residue. Add a few squirts of Dawn dish soap directly to the sticker residue. Let it sit for 10 minutes, and gently rub it with a cloth until the adhesive dissolves.
Wash With Soap and Water
After removing what you can with the freezer method, use warm water and dish soap to take off any remaining residue. "Wet the shirt and rub it with a microfiber cloth and a little dish soap," Whiting says. "Soak the garment in warm water for 20 minutes, then let it air-dry."
One easy method is to use standard cooking oil or oil-based materials. Vegetable or canola oil can work wonders, as can peanut butter or mayonnaise. Spread it on, let it soak into the residue for about an hour, then wipe it away. For a tougher clean, try rubbing alcohol or vodka.
But that conventional dish soap you've been using? It doesn't all wash off. In fact, it leaves toxic chemical residues behind on your dishes and glasses that pose significant health hazards over the long-term.
The Environmental Working Group gave Dawn a 'D' grade because of it containing methylisothiazolinone, which is a "High Concern: acute aquatic toxicity; Some Concern: skin irritation/allergies/damage". Sounds delightful, right? Dawn also contains 1 4-dioxane which is considered a groundwater contaminant.
Dish soap can be applied to stains before you run the wash, to better prevent them from settling into the fabric. Handwashing small loads: Dawn® Platinum can help remove stubborn oil and food stains, making it an ideal option for handwashing small loads of laundry.
Rubbing Alcohol or Vodka
Rubbing alcohol is an effective solvent that's safe for most plastic, wood, and glass surfaces. Vodka is a good substitute. Wet a paper towel or clean cloth with rubbing alcohol, and rub the residue to lift it off.
Yes, hand sanitizer can remove sticker residue from clothing. Hand sanitizer is similar to rubbing alcohol so you can use it in a pinch if that's all you have.
Windex's components, including ammonia, detergents, and solvents, work to break the bonds in glue leftovers, making them easier to remove. It dissolves sticker residue and water-based glues like white craft or school glue.
3M adhesive remover is amazing stuff. It beats Goo Gone by a wide margin, I recently used it to remove PETG residue from my 3D printer bed and that stuff is gnarly. 3M 38983 General Purpose Adhesive Remover - 12 oz.
Alcohol to the rescue.
When you apply rubbing alcohol, the adhesive residue will lose its adhesion and will precipitate. This can also work with acetone, or nail polish remover. Keep in mind that alcohol or acetone may damage painted surfaces, so be careful when using these substances.
Rubbing alcohol
Rubbing alcohol and vodka are popular methods for removing sticker residue because they're safe to use on a variety of surfaces such as wood, plastic and glass. To remove sticker residue with rubbing alcohol, apply it to a cloth until wet and rub the residue away.
Oil. Baby oil, cooking oil or even lubricants like Vaseline can effectively loosen old stickers. Apply a small amount to the leftover adhesive and gently rub the spot.
Soak a cotton ball, rag, or paper towel in rubbing alcohol, nail polish remover, or even inexpensive vodka. Press the soaked material onto the label for at least 15 minutes. Once the adhesive softens, peel the label back.
White Vinegar
It's even capable of removing sticker residue from surfaces, especially glass and metal. Vinegar's acidity is to thank, as it helps break down the adhesive and lets it be wiped away.
Yes,cleaning tape residue is one thing that can be done WD-40. Regular cooking oil will also work.
Rubbing alcohol or isopropyl alcohol – For a stronger approach, rubbing alcohol or isopropyl alcohol is your go-to. Apply a small amount on a cloth and gently rub the residue. The alcohol breaks down the adhesive, making it easier to wipe away.
Modpodge Rocks Blog recommends a combination of 1/4 cup baking soda, 1/8 cup vegetable oil, and 3 drops of citrus essential oils of your choice — lemon or orange will not only give it a fresh scent but also help to break down the adhesive.
Apply Heat. If you are dealing with a delicate surface and are unable to use adhesive remover, acetone, rubbing alcohol, etc., a bit of heat may do the trick, without damaging the surface. Some stubborn adhesives melt or soften and become much easier to remove when heated. Heat the adhesive using a heat gun.
It's the fact that the Platinum product is concentrated, and delivers more of the key grease-fighting, colorless ingredients called “surfactants."
It's possible to leave dish soap residue when you don't have time to rinse as thoroughly as you should.
Surfaces to avoid with Dawn® Powerwash:
Glass with UV coatings or other specialty treatments. Painted, varnished, or coated surfaces, including automobile paint. Precious metals, copper, or sterling silver. Leather, upholstery, or fabrics that won't later be rinsed.