Use Coke specifically when you need to remove problem stains like limescale or rust. If you want to avoid the risk of tinting your toilet with Coke, a light-colored carbonated soft drink such as 7UP or tonic water will also suffice.
Descaling your kettle of limescale has never been easier thanks to Coca-Cola. Just boil a kettle full of Coke and leave to stand for 30 minutes. While other cleaning products may do a better job of restoring a shine to the showerhead, Coca-Cola can effectively unclog the head when other products fail.
The carbonic acid that is in coke is what helps to clean toilet stains. Picture the acidity slowly working its way through the stains, melting them away. It can take a while depending on how stubborn the stain is which is why it's vital to have a suitable cleaning method depending on how bad the toilet condition is.
Vinegar is a natural acid that can dissolve calcium deposits. You can pour vinegar into the toilet bowl and let it sit for a few hours before scrubbing with a toilet brush.
To clean calcium buildup out of your toilet, use vinegar or another acidic cleaner. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
It'll run down and mix with the water, but leave behind an invisible layer of acid residue. The hardest part is letting the Coke work its magic. The longer you leave the acid, the better. An hour is the bare minimum, with overnight being the best.
WD 40 is great for cleaning out keyboards or loosening bike chains – but did you also know it is really good at removing limescale from your toilet? While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom).
Coke and Pepsi are loaded with phosphoric acid, which breaks down the buildup that can clog your drains!
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
How limescale ends up in your toilet? In many areas, tap water is known as hard water because it carries dissolved minerals like calcium and magnesium. When hard water evaporates, it leaves behind minerals that react and form a hard, chalky-like buildup known as limescale.
I did two 30-second intervals for 1 cup of Coke. You want to coat the entire toilet bowl with Coke. It'll run down and mix with the water, but leave behind an invisible layer of acid residue. The hardest part is letting the Coke work its magic.
Calcium carbonate buildup can be dissolved using mild acids such as lemon (citric acid), baking soda (sodium bicarbonate) or white vinegar. This method is ideal for removing limescale deposits from flat surfaces and around taps.
For this cleaning task, the more, the merrier, pour vinegar (about 1 litre) and a few cups of bicarb will work fine. Give the solution a mix until you have a paste. Then, add it to the toilet bowl and leave it to soak for as long as possible, at least an hour.
Muriatic acid (hydrochloric acid) can remove limescale deposits. However, it is very corrosive, can be dangerous to the skin and eyes, and should not be inhaled. Use citric acid cleaning solutions.
Grab some gloves and use a Magic Eraser to go to town on toilet bowl stains. Some users even recommend cutting a piece off and letting it dissolve the bowl to remove that unsightly ring all on its own.
Yes. The acid in coke will help to dissolve limescale and there are several examples of it being used to clean toilets, descale kettles and in other circumstances.
Pour a half cup of bicarbonate of soda into and around the bowl and let it sit for at least 15 minutes. Then, apply white vinegar over the baking soda. This produces a fizzing reaction that activates the acid and can break down the most stubborn build-ups of limescale.
Cleaning your toilet tank is pretty quick and easy with vinegar and baking soda. You only need to do it once or twice a year, and it can help get rid of bacteria, mold, and mineral deposits to keep you and your family healthy.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
Hydrochloric acid has traditionally been used to remove limescale. It is classified as a Class 8 Dangerous Good with highly corrosive properties.
Vinegar will not damage your toilet in any way if it's left in your toilet overnight. Regardless of your toilet's material, the vinegar is not strong enough to damage the toilet or the toilet's plumbing. So, you can leave the vinegar in your toilets overnight without worry.