If you're pressed for time, simply sponge down the sink with Pine-Sol® full strength. You can even splash a bit down the drain to refresh your garbage disposal with your favorite Pine-Sol® scent.
Clean your bathroom sink and learn expert tips on how to clean a bathroom sink with Pine-Sol. Stop the drain and fill your sink with warm water. Add ¼ cup of Pine-Sol® Lemon Fresh per gallon of water. Dip a sponge or scrubber into the sink and wipe down the sink and faucets.
Garbage Disposal: Run diluted Pine-Sol mixture, per bottle instructions, down your garbage disposal to eliminate odors. Surfaces: Wipe down all surfaces, particularly those surrounding the stove, with diluted Pine-Sol mixture, per bottle instructions.
Pine-Sol cleans all kinds of counter tops and surfaces while disinfecting. Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away.
Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood.
Pine-Sol vs Lysol
Lysol works just like Pine-Sol and will get rid of bacteria, fungi, mold, viruses, etc. after getting into contact with the surface for at least ten minutes. However, it may not be as effective if there are organic materials.
A new study out today reveals that numerous popular cleaner brands, including Glade, Clorox, Pine Sol, and the ostensibly eco-friendly Simple Green, contain chemicals that are known to cause hormone disruption, pregnancy complications, birth defects, and cancer, and can aggravate allergies.
According to Pine-Sol, you should refrain from using undiluted Pine-Sol on metal surfaces, such as copper or aluminum. However, it does not harm stainless steel. Instead, you can try using Pine-Sol diluted in water on a small spot that's not visible to test how it reacts with the metal.
Q: If I dilute Original Pine-Sol® Multi-Surface Cleaner, is it still effective against the COVID-19 virus? A: No. In order to disinfect against viruses and bacteria, you must use Original Pine-Sol® Multi-Surface Cleaner at full strength (in its concentrated form).
You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3' x 3' area and start mopping.
“Use Pine-Sol in a damp paper towel to clean stainless steel. It really makes it shine!”
Clorox Pine Sol Cleaner/Disinfectant/Deodorizer/Degreaser of 144 ounce capacity degreases and cleans all types of hard surfaces. Cleaner featuring heavy duty pine oil is used to fight against dirt and grease.
You can use Pine-Sol® cleaners on hard, nonporous surfaces, including floors, sinks, counters, stoves, bathtubs, shower stalls, tile and more!
Pine-Sol can help you with shower cleaning, walls, and more. Clear shampoo, soap and other items from your shower so you can hit all the corners before you clean. Mix ⅛ cup of Pine-Sol® in ½ gallon of warm water. Wipe down your shower walls with the mixture.
Steps to Disinfect
Pour full-strength (undiluted) Original Pine-Sol® onto a clean cloth or sponge. Apply to wet the hard, nonporous surface and let it stand for 10 minutes. Rinse with fresh, clean water.
What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.
You can mix Pine-Sol® with water at different strengths for different household needs, unlike a premixed spray. You can tackle any challenge, adjusting your cleaning power each time.
Wash your restroom and kitchen sinks to ensure clean and hygienic spaces for handwashing and dish-washing. Because Sunlight Pine Gel is non-abrasive, it can be used to effectively clean and protect high-use stainless-steel kitchen sinks.
The active ingredient in Pine-Sol is glycolic acid. According to the Department of Health, mixing chlorine bleach with acid produces chlorine gas. What is this? Chlorine gas irritates mucous membranes, causing coughing, breathing problems, and burning eyes.
Steps For An Expert Clean
Mix ¼ cup of Pine-Sol® for each gallon of water. Dampen a soft sponge, cloth or mop with the mixture to wipe down the surface. Scrub stubborn spots with a gentle scrub brush or mop. Use Pine-Sol® full-strength if needed, following up with a water rinse.
Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dampen a sponge in the mixture, wring out so it's just damp to wipe away grease, grime and dirt. Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth. Finish by rinsing with water and wipe kitchen cabinets dry.
Do you LOVE Pine Sol? The smell is probably the reason – the feeling of walking through a pine forest every time you clean is thrilling. It's also a great reward for cleaning. Full strength Pine Sol is made with real pine scent, just like the commercials claim.
Wipe down the inside surfaces of the microwave with a damp sponge soaked in hot water and a little scented Pine-Sol® Multi-Surface Cleaner. Wipe down with water for a streak-free finish. Sponge down the outside of our microwave with a mixture of about ¼ cup Pine-Sol® Multi-Surface Cleaner to a gallon of water.
Pine Oil. A green gel sanitiser. Ideal cleaner for the whole bathroom - hard surfaces. Use as supplied.
When it comes to cleaners and disinfectants, a common debate is if Pine SOL and Pine Glo are the same. They have very similar names, advertise a pine fragrance and are meant for similar purposes. The big obvious difference is the price.