Acid stains penetrate the porous concrete through a chemical reaction. The acid in the stain reacts with the concrete lime and inorganic metal salts. This chemical reaction creates a permanent color change.
Worse than the inadequacies of the acid wash process are the dangers of it. Over time, it can destroy concrete as the acid weakens its structure.
Decorative concrete expert Jason Geiser, of Deco-Crete Supply, acid washes an area of concrete to lighten the color of stain. Acid washing is the process of removing the top layer off a concrete surface to open its pores and provide a clean slate for a coating.
The current color of the concrete will affect the final color after acid staining. The important thing to remember is that you can't stain colored concrete lighter, you can only stain it darker. Keep this in mind when picking concrete stain colors. We have quite a few darker acid stain colors available to choose from.
Acid concrete stain utilizes a chemical reaction within the minerals of your concrete to transform a dull concrete slab into a one-of-a-kind looking floor for a fraction of the cost from most other systems. Mission Brown acid wash for concrete creates and forms varied colors of browns, tans and slight reds.
They may be used on everything from concrete floors and kitchen counters to pool decks and driveways, both inside and out. So in saying that acid stain can last 5 to 20 years depending on many factors.
Acid stains are a reactive coloring process that penetrates into the porous concrete surface. This is probably the most permanent of all coloring options but is usually limited to eight colors.
This will help the sealer to penetrate and result in a superior bond between the sealer and the surface. Sealing after acid washing provides long lasting durability and enhances or deepens the colour of your blocks, it is important to seal the acid washed area as it offers excellent protection against staining.
High concentrations of muriatic acid can etch concrete, glass, remove paint, dull chrome, and cause other issues. Below is a summary of how much to add to a gallon of water: Heavy cleaning: 3 ounces of muriatic acid to one gallon of water.
A small amount of acid added to the water will pull the stain out of the concrete without etching the concrete surface. In essence, the acidic solution reverses the reaction, allowing you to pull the color back out of the concrete.
Usually this white or off-white discoloration to concrete and masonry forms when soluble salts and other water dispersible materials come to the surface through capillary voids as a result of temperature changes, moist migration, condensation, rain, dew, and/or too much water in the mix.
Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
Concrete Cleaning and Sealing: DIY vs.
DIY is certainly the cheaper option; homeowners will typically spend between $0.20 and $0.75 per square foot when cleaning and sealing concrete themselves, whereas that cost increases to between $1.20 and $1.75 per square foot when left to a professional.
The instructions with most acid stains (as well as concrete sealers and coatings) say to wait at least 28 days after pouring a slab before finishing it, with some recommending as long as 60 days.
Stains are effective in restoring glaze to dull, shabby concrete surfaces. Slabs with none to minimal cracks, blemishes, and other flaws are ideal for staining. Stains enhance the appearance of the surface; they don't conceal defects.
Acid-Based Stains
An acid-based stain costs between $0.20 and $0.40 per square foot on average or a total of $2 to $14.50 per square foot with labor. Acid-based stains chemically react with your concrete flooring, giving a natural appearance.
The cost to install acid stains is around $2 to $6 per square foot for basic designs or $12 to $25 per square foot for complex colors and patterns. Acid stains, also called reactive stains, contain hydrochloric acid and metallic salts that chemically react with concrete to produce earthy colors.
The reason for washing the residue is to neutralize the acid. So long as you properly neutralize and rinse the concrete well a couple of times, it should be fine. Note: If you do not properly neutralize the stain, then the sealer will lose it's bond, which will then have to be stripped and re-applied.
Though new concrete may not always require a second coat of acid stain, older concrete does require two coats of stain for complete coverage. For a more diffuse look, spray the stain onto the surface without brushing.
Concrete Acid Stains are the only true stains with permanent results.
Cons of Outdoor Concrete Staining
Transparent: The semi-transparency of most stains will fail to hide the existing imperfections in the concrete surface. DIY is not easy: Staining concrete is the not the easiest job for the amateur weekend warrior. Using a professional contractor ensure best results.
Acid stains or Chemical stains react with the lime in concrete and color the concrete whereas concrete dyes offer transparent colors to the concrete surface.
When properly designed and installed, acid-stained concrete and decorative concrete overlays are almost completely unaffected by water.
Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.