One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
Our 1 hp example pump uses 1.75 Kw per hour; whereas a 2 hp motor of the same type (UST1202) would draw 2.4 Kw per hour. That's around 24 kWh per day, or around 720 kWh per month, just running only 10 hors per day. During the heat of the summer, many pumps need to run longer to maintain clear water.
Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.
Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up. Your pool is more vulnerable during the day, plants don't grow at night the way they do during the day–that's true of ALL plants including Algae.
To prevent potentially dangerous electrical issues, it's imperative that you turn off the power to your pool equipment — such as pumps, motors, filters, heaters, chlorinators, and lighting fixtures. Even if you turn off the power to your pool equipment, it can still be damaged by wind, rain, and debris.
So, how much electricity does a pool heat pump use? About 5 kilowatts per hour per 100,000 BTU heat pump. For a general 100,000 BTU pool heat pump, the power you`ll utilize is approximately 5,000 Watts per hour. Typically, the National average for power stands at 13 cents for every kilowatt-hour.
12 cents per kWh = 4.97 per day to operate the pool pump. Now if you are running the same pump, but with 230 Volt, the cost will be 2.49 per day.
Compass Pools estimate an average running cost of 50p per hour for a swimming pool heat pump, which will likely run at anything from 4 hours to 8 hour a days, meaning daily running costs of around £5 a day in summer and £10 a day if using year-round for heating plus chemicals.
Take daily cost and multiply by how many days per year you operate your pump. $2.91 cost per day x 365 days = $1,062.15 per year to operate your 1-½ HP pool pump.
As long as it runs for at least 8 hours in every 24-hour period, you're good to go. Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time.
How much does a pool cost to run? The average swimming pool will cost between $660 and $1,000 to run annually – consuming between 2,000 and 3,000 kilowatt hours of electricity. That's about $23 each week!
In fact, Certified in-ground pool pumps use 18% less energy than standard pool pumps and can save more than $300 a year in energy bill costs. Certified above-ground pool pumps use 11% less energy and can save more than $115 over the lifetime of the product.
Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.
Your pump uses 600 watts an hour.
TriStar® VS variable speed pool pumps are the most energy efficient on the market, according to EPA ENERGY STAR 3rd party testing data. Saving pool owners up to 90% on energy costs, they are specifically designed to replace most single speed pool pumps.
Heat pump pool heaters cost more than gas pool heaters, but they typically have much lower annual operating costs because of their higher efficiencies. With proper maintenance, heat pump pool heaters typically last longer than gas pool heaters. Therefore, you'll save more money in the long run.
On average, natural gas burns about 1 therm per 100,000 BTUs per hour (British Thermal Units). Meaning, an average pool heater between 300,000 and 400,000 BTUs will cost anywhere from $3.30 to $4.40 per hour to heat your pool.
A standard pool pump is typically 1½ to 2 hp and operates using a single-speed induction motor generating excessive filtration flow rates. This volume of water is achieved by a 3,450 rpm rate that requires between 1,500 and 2,500 watts of electricity depending on the service factor of the motor.
If the pool overflows, now only will the pool chemicals be diluted, but they may contaminate the pool deck and surrounding landscape. Removing excess water quickly is important to prevent this.
You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.
Run the pump for 8 hours, every 24 hours. You can also pause in between; there is no need to run it continuously. Ideally, after you shock the pool, be sure to run the pump at night and during non-peak hours, to save on your energy bills.
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.