No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet. This requires a full re-design of the cabinet and countertop where your farmhouse sink is installed.
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
Yes and no, there is a specific cabinet for farmhouse sinks. However, a standard sink base cabinet can be modified to fit a farmhouse sink. If you are using a standard sink base cabinet, the top half of the cabinet will have to be cut out, and the doors will have to be modified.
It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
However, there are some key differences between the two types of sinks. Apron sinks are generally smaller than farmhouse sinks. They are available in various materials, including stainless steel, copper, and porcelain. Apron sinks are available in different styles, including single-bowl and double-bowl options.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten.
Step 6: Add Support to Cabinets
Because farmhouse sinks are pretty heavy, you'll need to add support to the inside of the cabinet to be able to hold the weight. You can do this by adding two two-by-four pieces of wood to the sides horizontally.
Yes, absolutely. A garbage disposer can be installed in a farmhouse sink be it a single bowl or a double bowl. In most cases, for standard thickness farmhouse sinks, you can use the stainless steel drain flange that comes with the garbage disposer.
Consider the size of the sink. The base cabinet should be wide enough to accommodate the sink, with additional space on either side for plumbing and dish soap. It should also be deep enough to prevent water from spilling out onto the floor. Think about the type of material you want the cabinet to be made of.
A farmhouse sink makes it easy to wash larger items like pots, pans, and baking sheets. You can easily soak your cookware in a farmhouse style sink as opposed to a standard-sized sink. It's also a great option if you prefer to soak a lot of dishes at once before you wash them or pop them in the dishwasher.
But what actually makes a sink considered “farmhouse” style? The TLDR definition of a farmhouse sink is “a deep sink that has an exposed front-facing side.” Thesaurus may also refer to it as an “apron front” sink – which, in our opinion, is the best description as it literally acts like an apron as you wash.
If you want a farmhouse sink, then you can't go any wider than the front face (24" for a 42" corner cabinet). With an undermount or drop-in sink, you can go a little wider since the sink will be set back a few inches.
The inner dimensions of a 30" Ikea cabinet are 28.625". So if the sink is 27.5" wide close to the top, it will fit without cutting down the sides. But if it is 29.8" at the top lip, it depends on your mounting strategy and how much the sink sides taper.
The most common countertop overhang is 1.5″. We wanted our sink to go about 1/2″ past the countertop, so we positioned our sink so that it would go 2″ past the cabinet face frame/front of the cabinet.
OVERHANG - The countertop extends over the edge of the sink on all sides by approximately 1/8" - 1/4". Use caution with this installation to be sure that accessories such as colanders or cutting boards will fit properly. REVEAL - The countertop edge sits approximately 1/8" - 1/4" back from the edgeof the sink rim.
Also known as a farm sink, an apron sink, or an apron front sink, farmhouse sinks were common in older homes and ergonomically designed for people to spend hours in front of the sink. Farmhouse sinks jut out past the countertop so the user doesn't have to bend over to reach them.
The primary benefit of a grid for new farmhouse sinks is to protect the brand new finish. Fresh copper and even hardened fireclay scratch more easily than you might realize. The metal bottom of pots, the metal tines of forks, and even the scrape of ceramic plate edges might cause a small flaw in the finish.
With an apron sink, you can keep much of this mess at bay. If any water, suds, or spills make their way over the front lip, they'll avoid your counter and cabinets, landing on the floor instead. This is because the sink itself sticks out beyond the depth of your cabinets.
A good place to start when looking for the right size is with the most popular sizes for farmhouse sinks, small, medium, and large. Or the most common, either a 30″ or 33″ single bowl.
Kohler makes farmhouse sinks with smaller aprons to keep the same aesthetic in a more manageable size for some cabinets. In most new homes the kitchen sink is approximately 30 inches in length, which is a standard size for a farmhouse sink. The other standard sizes are 24, 33, and 36 inches.
We normally go ⅜ inch inside the sink for the overhang, but this can be flexed for the look you desire.