For winter, leaving your thermostat fan on AUTO is the recommended default. It saves energy and prevents the system from blowing unheated room air, which can feel chilly.
If you want to save energy and money, the answer is usually “auto.” Here's why: When your thermostat is in the “on” setting, the blower will run regardless of whether the temperature set point has been reached.
While there are pros and cons to both settings for your furnace, here at Mattioni, we typically advise customers to use the auto setting, and here's why. The damage to your heating system by turning on and off is generally negligible and can usually be prevented with seasonal furnace maintenance.
No, 68°F is not generally considered cold for a house in winter. In fact, experts at the U.S. Department of Energy recommend 68°F as the ideal, energy-efficient temperature for the winter months while you are awake.
If you'd like to calculate your ideal HVAC fan runtime, here's a simple formula: Measure the square footage of your home. Divide the square footage by 2. This number represents the number of minutes your HVAC fan should run per hour.
Although most furnaces benefit from running the furnace fan continuously in the winter, there are some cases in which it's better to select the “Auto” setting.
It depends on a lot of factors, but during the coldest days of the year it should be running almost non stop to maintain 72. One would need to know how many BTUs the furnace is, how well insulated your house is, how good the windows are and also your climate for a good answer.
Regardless of how long you will be traveling and away from home, keep your thermostat set at 68 degrees Fahrenheit or above. This will help to keep the pipes on the inside of the home from freezing and the ones under the home at a slightly higher temperature as well.
What is the Best Temperature to Keep Your House in the Winter? The average ideal room temp is around 68–72° F in the winter, depending on your personal preference.
If you're cold even though your thermostat indicates you shouldn't be, your furnace likely isn't the problem. In most cases, it's working just fine. It's your home that needs attention. Lack of insulation, severe air leakage, and/or unbalanced ductwork are frequently to blame.
The minimum winter thermostat temperature depends on your primary goal:
It takes time for your home to warm up and cool down. If you're not sure how long it takes, try turning the heating on about 30 minutes before you need it. You should turn it off 30 minutes before you'll stop needing it.
Yes. For the fan setting, Auto is universally recommended for energy efficiency. It only runs the blower when actively heating or cooling, which lowers utility bills and reduces wear.
The Auto setting runs your HVAC fan only when the system is actively heating or cooling, which is highly energy-efficient and prevents humidity problems. The On setting runs the fan continuously, providing constant air filtration but increasing wear-and-tear and utility costs.
5 Warning Signs It's Time for Furnace Replacement
During winter, the lower the interior temperature, the slower the heat loss. So the longer your house remains at the lower temperature, the more energy you save, because your house has lost less energy than it would have at the higher temperature.
While everyone has a different tolerance to cold, ideal winter heat settings should generally be at or above 63 °F (17 °C). Excessive cold (anything below 62 °F or 16 °C) in your home can actually raise your blood pressure as your blood “thickens” in the chilly temperatures.
Keep your thermostat set to a minimum of 55°F (13°C) to keep your pipes from freezing. If you are leaving the house for an extended period, maintain this temperature to ensure heat reaches the walls where pipes are located.
It's better to leave interior doors open when heating your home. Open doors allow warm air to circulate evenly, preventing hot and cold spots and reducing the strain on your HVAC system. Closed doors can block airflow, making your system work harder and increasing energy costs.
When a cold snap hovers around or below 32 degrees Fahrenheit for a couple days in a row it's time to let at least one faucet drip. Pay close attention to water pipes that are in attics, garages, basements or crawl spaces because temperatures in these unheated interior spaces usually mimic outdoor temperatures.
It is OK to set your thermostat to 74°F if you're happy with that temperature. However, many people find temperatures between 68°F–72°F more comfortable for everyday living. If efficiency is a concern, you might want to consider lowering the temperature by a few degrees to save energy.
While we know that water freezes at 32 degrees Fahrenheit, keep in mind that indoor pipes are somewhat protected from the extreme outdoor weather. Without a heat source, pipes may take as little as 3 hours to freeze at 20 degrees Fahrenheit or lower.
Reduced Wear and Tear: Frequent on/off cycles can put extra stress on your furnace's components. A steady cycle reduces this wear and tear. Improved Efficiency: Furnaces operate most efficiently when running for longer periods at a steady pace, rather than sprinting in short bursts.
The heat exchanger is often considered the most costly part of a furnace to repair or replace. It is a critical component that transfers heat from the combustion process to the air that circulates throughout your home. Over time, heat exchangers can crack due to the constant heating and cooling cycles they undergo.
Typically, a properly sized furnace will run for about 10–15 minutes per cycle during colder months. If your furnace turns on every few minutes, it may be short cycling, which can indicate issues such as a clogged filter, blocked vents, or an oversized unit.