No, a vapor barrier is typically not recommended or needed over a plywood subfloor. Plywood is a breathable material; if you add a vapor barrier over it, you can trap moisture and cause the wood subfloor to rot or grow mold.
There is no need for a moisture barrier when installing on plywood. However, you will want to look for an underlayment with sound reduction and feels comfortable. Often times, many materials have a built-in vapor barrier that can be used over wood subfloors.
Yes, you can install Luxury Vinyl Plank (LVP) directly over plywood. However, because LVP is flexible and conforms to the shape of the surface beneath it, proper preparation is essential to prevent bumps, squeaks, or separated seams.
The Different Types of Underlayment
Short answer: yes, mould can grow under vinyl flooring — but only when moisture gets trapped between the planks and the subfloor. Vinyl itself is non-porous, so the planks don't host mould.
Water vapor can cause serious damage to your home. For instance, if your flooring gets wet, it could cause mold and mildew, and even destroy your floor (source). No one wants that, so vapor barriers are there to help prevent the floor from getting wet.
Yes. Both dry and wet Swiffer mops are safe to use on vinyl plank, as long as you're using cleaning pads that don't leave behind residue. Just avoid soaking the floor.
Preparation Mistakes That Lead to LVP Installation Failure
Any uneven spots, old adhesive, or leftover debris from an existing floor can transfer through luxury vinyl or stress the locking system. The result is a floor that moves, clicks, or separates. Moisture conditions matter as well.
To prep a plywood subfloor for vinyl plank flooring, you must secure loose panels to eliminate squeaks, sand down raised seams, and fill gaps or indentations. A perfectly flat and debris-free surface prevents the planks from telegraphing imperfections, buckling, or separating at the locking edges over time.
The best underlayment for vinyl plank flooring depends on whether your planks already have a pre-attached pad. For planks without an attached pad, a dense foam, cork, or rubber underlayment 1.5 mm or thinner is ideal. If your vinyl planks already include padding, adding extra underlayment is generally unnecessary and can void warranties.
Even if you have waterproof vinyl flooring, an underlayment will prevent spills from permeating into your subfloor. Plywood is also incredibly noisy when the flooring is installed directly to it, due to the friction and movement between the floors as discussed earlier.
What are the most popular vinyl plank flooring colors in 2026? Light oak, greige, and soft brown tones continue to be favorites. These colors feel fresh and versatile, working well with neutral palettes, natural light, and the relaxed, airy look many homeowners are going for right now.
A quality underlayment for vinyl plank serves a few key purposes: Moisture Control: It creates a vapor barrier, which is non-negotiable when you're installing over a concrete subfloor in a basement or on a slab. This simple layer stops moisture from creeping up and wrecking your floor from below.
No, standard Tyvek cannot be used as a traditional vapor barrier. Tyvek is a housewrap designed as an air and moisture barrier. It keeps bulk water out but is highly vapor-permeable, allowing moisture to escape the wall to prevent rot and mold.
Yes, you can install Luxury Vinyl Plank (LVP) directly over plywood. However, because LVP is flexible and conforms to the shape of the surface beneath it, proper preparation is essential to prevent bumps, squeaks, or separated seams.
OSB/3 and OSB/4 are particularly suitable as vapour barrier levels, as they have the necessary static properties and thus serve not only as a vapour barrier and airtight level, but also as a stiffening of the roof truss.
Yes, you can absolutely install vinyl flooring directly over a subfloor, provided the subfloor is structurally sound, clean, and perfectly flat. Because vinyl is relatively thin and flexible, it can easily "telegraph" or show the shape of bumps, cracks, or gaps from the subfloor beneath it.
For a laminate floor installed over a plywood subfloor, high-density foam or acoustic felt (often called "3-in-1" underlayments) is generally the best choice. These provide necessary cushioning and sound absorption, but unlike installations over concrete, you should avoid built-in plastic vapor barriers, as wood needs to breathe to prevent rot.
For plywood subfloors, screws are heavily recommended over traditional nails. While framing nails rely on friction and can work loose over time (causing the floor to creak and squeak), subfloor screws have spiral threads that provide permanent grip and tightly pull the plywood down to the joists.
Common Mistakes When Installing Vinyl Plank Flooring
Luxury Vinyl Plank (LVP) flooring typically lasts 15 to 30 years, depending on the quality of the planks, the thickness of the wear layer, and foot traffic.
Yes, you can place a refrigerator on top of vinyl plank flooring. Because the floor is highly durable and waterproof, it easily handles the weight and potential spills of a fridge. However, as with any heavy object on a floating floor, taking a few precautions prevents damaging the planks.
Yes, Dawn dish soap is safe for vinyl floors, but only if heavily diluted. It is excellent for cutting grease and grime, particularly in kitchens. However, using too much can leave a cloudy, dull, or sticky film behind.
The best mop for vinyl plank flooring is a microfiber flat mop (or a gentle spray mop). It cleans without scratching the wear layer and allows you to control moisture, preventing standing water from seeping into the joints and causing planks to swell or warp.
Avoid using harsh chemicals, excessive water, or abrasive tools on vinyl plank flooring, as these can strip the protective wear layer, dull the shine, or cause planks to warp.