Shocking your pool isn't necessary, although, it's not a bad idea either. If you get an extremely heavy rain fall, you could shock your pool for good measure. This will help fight off any contaminants that the rain may have brought to your pool.
Use shock treatment on your pool one or two days before the storm. Add chlorine levels significantly during the treatment and let it run for 24 hours to allow the treatment to fill the entire pool. Make sure all furniture or items around your pool are safe to prevent injury to persons or property.
It's often recommended to shock your pool once a week. If you don't do it every week, you should at least do it every other week. This is necessary to maintain your pool's water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
Running your filter after shocking your pool is a must and is just as important to your pool as shocking it is. Be sure to run your filter for at least 6 hours, but shoot for 24 hours to several days, if your pool is particularly dirty or has algae, to properly circulate the chlorine and clean the water.
If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
When preparing your pool for a storm, leave it uncovered. Installing any kind of cover across the pool will not do much to protect against dust and contaminants because storms often bring strong winds and heavy rain that can cause the cover to lift off your pool.
The Department of Environmental Health recommends avoiding activities such as swimming, surfing, and diving for 72 hours after it rains. Research has shown that the risk of infection is the highest during and the day after rain, and declines to around normal levels after three days.
One heavy rain is all it takes to throw off your pool's chemistry by unbalancing the pool water's pH and making it slightly more acidic. This additional acidity and nitrogen provide a breeding ground for algae that will turn your pool green.
When rainwater and 'run off' enter the pool, they can change your water's pH, calcium hardness, total dissolved solids (TDS), alkalinity and other chemical levels as well as bring contaminants (e.g. debris, dirt) into the pool.
Whilst it is preferable that you keep your swimming pool covered ahead of heavy rains to keep contaminants away, the cover may also be of little value in the event of strong winds accompanying a storm. It can easily be ripped off by gusts or torn by falling branches, sticks, or other sharp objects.
Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
Before you start pouring shock in the pool, the first step is to brush the sides and floor of your pool to loosen all the algae. Doing this breaks the skin and allows the pool shock to more easily kill the algae. Once you've done this, it is important to make sure you have the proper pH level in your water.
Now it's time to wait a while.
Keep your pump and filter running. Give the shock a good 12 to 24 hours to work it's magic. If the algae hasn't cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.
However, after shocking the pool, you shouldn't vacuum for at least 24 hours. Running the water pump during this period will allow the shock to do its job.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
The only time I ever protected my Intex pump from the weather was when I stored it over the winter. Make sure the electrical plug isn't laying where pooling rainwater could short it out and it's fine to leave exposed to the weather.
The Problem with Rainwater
Low pH not only makes the water cloudy and uncomfortable for swimmers, it causes chlorine to break down which allows algae and bacteria to grow. Over the long term, low pH can cause pool components to rust, grout, and concrete to etch and cause the liner to weaken and deteriorate.
Nothing wrong with rainwater. It's probably the best thing you can fill your pool with (aside from bottled water) as it has no calcium in it, minimal alkalinity and neutral pH.
"Heavy rain dilutes pool chemicals, especially salt and chlorine, which causes the pool to turn green. This means the water is not sanitised or healthy, so it's vital to address this.
With a rain storm, any number of contaminants can be washing into your pool – acid rain, pollen, insects, tree droppings, dust, sand and even phosphates. Any one or combination of these things in rain can make your pool cloudy.