Can You Paint Over Cabinets Without Sanding? Skipping the sanding step is OK if you're making a change from one newly painted surface to another, or painting raw, unvarnished wood cabinets.
If you don't clean before sanding, contaminates (like cooking grease) will be pressed down into the wood. Contaminates will keep the soon be applied paint for sticking. You can remove the doors here in the process or wait until after you wash them down. It is totally up to you and situational dependent.
Yes, it is possible to paint cabinets without sanding.
If the cabinets are in super-bad shape (really scratched or dinged up) or you want to smooth out a wood grain, sanding may be necessary. “I've found that most cabinets people want to repaint are in pretty good shape, and they don't mind if you can see a little wood grain,” says Dowding.
A: You can paint the oak cabinets and the laminate ends, provided you do the prep work necessary for a good finish. Start by cleaning the cabinets with a strong detergent to remove surface oils. Then, use a fine grade of sandpaper to lightly scuff up the oak and laminate surfaces.
Wood cabinets are ideal for painting, but any surface that can be scuffed with sandpaper can be painted. Laminate cabinets require a special bonding primer. The laminate must be in good condition for best results. Choose a high-quality paint.
Painted cabinets should get a thorough sanding with 120-grit paper, but no matter the finish, do a final pass with 220-grit. Use a sanding sponge to dig into any tough areas that need special attention or corners that are hard to get with your sander.
While sanding is not required for every paint project, rough spots on walls, whether they have been previously painted or not, need to be sanded before they are painted to ensure the paint goes on smoothly.
Using a paint sprayer is one of the easiest ways to get a super smooth finish on your cabinets. By their very nature, paint sprayers eliminate brush strokes and roller marks completely. And painting with a paint sprayer is almost always faster than using a paint roller and paint brush.
However, oak cabinets are currently in the middle of making a comeback. There are several possible reasons for this. First, homeowners are looking for warmth and authenticity in their kitchens. Natural wood checks all the boxes.
On average, this trend alone can boost a home's value by $1,547. By painting your kitchen cabinets and then pairing them with some new hardware that dollar amount can increase significantly.
It is generally not recommended to paint over varnished wood, but you can paint over it without sanding it. If you want to protect the surface permanently, you can use Chalk paint and seal it with a top coat. Or, you can use a special bonding primer to prepare the surface for painting without sanding it first.
You can use any type of acrylic you like for painting on wood. Take a look at our brilliant range of acrylic paints here if you are looking for some. Use a wide, flat paintbrush to apply the paint to the wood. Allow the paint to dry before applying a second coat, and then paint the back if you wish.
Using Oil Bond: The Latex Paint Additive
Particularly in places like kitchen cabinets, bathroom cabinets, trim, doors, built-ins, painted furniture and windows, Oil Bond gives painters the ability to create powerful, professional-grade adhesion, all without sanding or priming.
For wood, brushing is fine, but you may want to hire a professional for a good finish. Using a roller to paint cabinets is a lot faster than brush painting, however, the fabric on the roller will create a 'bobbly' texture on the surface. The texture a roller puts on cabinets makes it unsuitable for gloss paint.
Once your cabinets are clean and dry, use a 100 or 150-grit sandpaper to roughen up the surface of the cabinets. Cabinet paint won't adhere properly to a smooth or shiny surface. You don't need to completely remove the prior finish, just rough up the surface enough to give the primer something to stick to.
Liquid Sandpaper Works Faster
Liquid sandpaper does the work for you in about 15 minutes. All you have to do is apply it, wait 15 minutes, and wipe off any residue once it dry. Any varnish or glossy finish will have magically peeled away and you'll be left with wood that's ready for paint or primer.
If your cabinets are stained, apply at least two coats of quality primer. For me, there's nothing better than BIN, Zinsser's shellac-based pigmented primer. It dries fast and flat, without brush marks (unlike most oil-based primers). You can buy it at home and hardware stores, as well as online (view on Amazon).