Pinesol does not have to be rinsed typically, as long as you mixed it properly to begin with.
Don't neglect to rinse after mopping. Rinsing is an important, often overlooked final step. All cleaning products, no matter what they are, leave behind residue. Dirt, dust, grime, ect, is 'attractanted' to the residue, and 'binds' with it.
Once the surface is wet with the Pine-Sol, let stand for 10 minutes, and then rinse or wipe off with water.
Stop Using Wax-Based or High-Residue Cleaners: Avoid using Pine-Sol, Mop & Glo, and even certain products like Fabuloso or Swiffer Wet Pads, as they can leave behind a layer of residue that attracts dirt and creates a hazy buildup over time.
Failing to rinse the floor properly after cleaning can leave behind detergent or cleaner residue. Make sure to rinse with clean water after using any cleaning solution. Using a dirty mop or not changing the cleaning water frequently enough can spread dirt and grime around, causing stickiness.
Step 4 Mop over your floors again to rinse away any remaining cleaner to prevent buildup of film or residue.
If the leftover residue is still fresh, or it's just a thin layer of sticky residue, then it can be taken care of by using a wet mop and plain, cool water to rinse the floor. If the floor is still sticky, swap out your mop for an autoscrubber equipped with a red pad.
If too much cleaner is used, or if it's not suitable for your floor type, it leaves a sticky film that attracts more dirt. Another common reason is the mop itself. Using dirty water or not changing it frequently enough while mopping can spread grime rather than remove it, which leads to that unwanted sticky floor.
If you plan to use Pine-Sol, it's important to keep your cat away from surfaces until the Pine-Sol has dried completely. Stepping on wet Pine-Sol can irritate your cat's paws, and your cat can end up swallowing Pine-Sol if they try to lick their paws clean. Pine-Sol is safe after it has dried completely.
What tile floor cleaners don't leave residue? In testing, we found that the Quick Shine Multi-Surface Floor Cleaner, Lysol Multi-Surface Cleaner, and Bona Multi-Surface Floor Cleaner Spray didn't leave residue after cleaning.
CAUTION: Causes moderate eye irritation. Avoid contact with eyes, skin or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet.
A: We do not recommend using Pine-Sol® Original Multi-Surface Cleaner on aluminum, copper or marble surfaces. We also do not recommend using Pine-Sol® Cleaners on cars, on dishes or as a pet shampoo.
Yes. The 2X concentrated formula of Original Pine-Sol® Multi-Surface Cleaner can disinfect even when diluted when used as directed. Use full strength or mix 1 cup per ½ gallon of water and apply on hard, nonporous surfaces with a clean sponge or cloth. Allow surface to remain visibly wet for 10 minutes, then rinse.
It's easy to believe that, to make something clean, you need to use chemicals. Surely you can't clean a floor with only water - can you? The answer is yes: it's been proven that water is often enough to clean efficiently when used in conjunction with a good auto scrubber.
If you must use pine sol, I'd definitely follow with a clean water washing to remove residue especially for safety of animals and children.
Pine-Sol is also safe for luxury vinyl wood plank flooring and vinyl tile flooring, so long as used with a dry mop and you do not saturate the floors.
Effectiveness: Pine Sol contains pine oil, which is known for its strong scent. This scent can act as a deterrent for certain pests, such as ants, spiders, and cockroaches. However, it may not be as effective against all types of critters.
Depending on the level of dirt on your floor, it could need a rinse with clean water after mopping it. If you skip this crucial part of the process, the floor could end up all sticky and smudgy.
Mops can only pick up surface level dirt, and only as much as the fibers can hold. That means that much of the dirt and grime gets left behind, leaving you with sticky floors that still need to be cleaned. Cleaning your mop and the mop water during the process can help you maximize the effectiveness of your efforts.
Keep the mop water clean by changing it frequently and ensure the mop is also clean before you begin. Use distilled water if possible and dry the floor with a clean and dry mop pad or towel to prevent streakiness.
Use Dish Soap as a Mopping Solution for Most Floors
Use mild dish soap as a mopping solution for most floor types without leaving a residue. Don't overuse it, though—too much will create a slightly sticky film.