Using Corian-Approved Abrasive Cleaner: Apply a small amount of Corian-approved abrasive cleaner to a clean, damp cloth. Gently rub the scratched area in a circular motion. Rinse thoroughly with clean water and dry the surface.
The benefit with Corian countertops is that you can even buff out scratches with an abrasive pad and cleaner. If just cleaning and buffing aren't enough, you can use a commercial countertop polish to bring back the glossy finish.
Do Not Use On Granite or Marble. If you have soft surface countertops like granite or marble, step away from the magic eraser. You can use them on laminate, Corian, quartz, and other solid surface countertops, but do a spot check.
We offer a full sand up and republishing service for your Corian worktops to remove mark, scratches and stubborn stains to bring your worktops back to how they looked when they were first installed.
All minor damage should be repaired with a light abrasive cleaner and a 3M™ Clean Sanding Disc - Scotch-Brite™ 7447 (maroon), or fine P-grade paper for heavier damage.
Light scratches can be buffed out with a non-abrasive solution, such as baking soda paste, and to regain the sheen, buff the surface vigorously with vegetable oil, car wax, or furniture wax. If the scratches are deeper, progress to a more abrasive compound, and as a last resort, use P-grade sandpaper and water.
Keep Solvents and Powerful Chemicals Off the Counter - Avoid exposing Corian® Quartz to strong chemicals and solvents, especially paint removers or furniture strippers containing trichlorethane or methylene chloride.
Corian worktops are highly resistant to scratches, stains, knocks and heat, and do not delaminate, but it is necessary to remember that no worktop is indestructible and hard knocks, cuts, spillages, etc can leave marks.
Use a low-speed lambswool polisher and buff the entire surface with Corian polish, car polish or cutting compound, until the gloss is restored. Wash off any residual polish and wipe the countertop dry with a soft cloth.
Never put hot pans, in particular cast iron pots or hot casserole dishes directly on a Corian® top or in a sink. Such heat can damage any surface. Preventing Other Damage Be aware of what your Corian® surface has been exposed to. Harsh chemicals may damage the surface (e.g. paint removers, oven cleaners, etc.)
Remember, if the Corian® color is slightly darker like Cocoa Brown, and the finish looks to dull or blotchy, you may want to sand it up a step or two; and then buff with a gray scotch Brite pad. The extra steps will brighten the color and clear up the finish.
Corian and other solid surface materials are generally warranted for 10 years; but in practice, they can easily last 30 years or more. Scratches and burns—or simply the need to change styles—may eventually make you want to replace these countertops.
BAR KEEPERS FRIEND Powdered Cleanser 12-Ounces (1-Pack)']
A: Bar Keepers Friend should be safe on Corian as long as it is for occasional use only.
Use the buffer to work the glaze into the tabletop's affected area first. Ultimately you will want to buff the entire surface, but we like to give the scratched area a little more attention to start. Once we buff/polish the entire surface, we used a simple glass cleaner and rag to wipe it clean. Bam!
Rinse thoroughly with clean water and dry the surface. Applying Corian Polish: Apply a small amount of Corian polish to a soft cloth and buff the scratched area using gentle circular motions. This step will restore the shine and finish of the countertop.
In terms of durability, Corian tends to be more easily damaged by hot surfaces than natural stone. It's also more prone to scratches than surfaces like quartz and granite.
For persistent stains or small scratches, we suggest using a wetted abrasive sponge, such as Scotch-Brite: pass the sponge over the stain or scratch in a rotating motion, taking care to uniform the adjacent surface to eliminate differences in opacity.
Grease, fat and oil – use a small amount of dilute bleach and rub with a microfiber cloth. Make sure you rinse the area thoroughly with warm water afterwards to prevent staining. Minerals, lime scale and hard water – apply lime scale remover or vinegar with a microfiber cloth and leave for a few minute before rinsing.
Despite varying trends and marketing influences, Corian remains a timeless choice!
For minor car scratches or surface blemishes—left by fingernails around door handles, for instance—buffing is an easy and inexpensive solution.
How to Shine Corian Countertops. Clean your countertop with an ammonia-based household cleaner or soapy water. Use an abrasive cleaner to remove stains, or use an abrasive cleaning pad to buff out scratches. For a higher shine, rub a commercial polish in a circular motion onto your clean counter.
One of the main disadvantages of solid surface countertops is that they are softer than natural stone. This makes them more susceptible to scratches caused by knives and other sharp utensils. The scratches appear white on the surface, especially against darker-colored solid surface countertops.