Make light of this tough job with CLR Oil & Grease Remover. Before you get started, always use gloves and check if CLR Oil & Grease is suitable to be applied on the material you are trying to clean. Test the CLR Oil & Grease Remover on an inconspicuous spot first before applying to entire surface.
Use in a well ventilated area. To use CLR Metal Clear, wearing rubber gloves, dip a damp cloth or sponge into the solution, rub briskly over the area you are cleaning, let it soak for two to three minutes and then rinse with cold water.
May sting a bit, nothing dangerous. CLR is non-dangerous acids in water and surfactant. Each acid, not to be confused with skin-melting sulphuric acid, but not anywhere close to humanly dangerous, specifically chemically breaks down either calcium...
Skin Contact: Immediately flush with water for at least 15 minutes. Contact physician. Inhalation: Remove to fresh air immediately.
HANDLING and STORAGE: Avoid contact with eyes, skin or clothing. May be harmful or if swallowed. Use with adequate ventilation. Avoid breathing vapors or mist.
CLR is corrosive. Avoid contact with wood, clothing, wallpaper and carpeting. Some laminated surfaces (counter tops) are coated with a synthetic surface which may be affected by rust removers; clean spills immediately.
Inhalation: Ingestion: May cause irritation with discomfort or rash, prolonged skin contact may cause ulceration Excessive inhalation may cause irritation of the respiratory passages May cause irritation of the gastrointestinal tract with abdominal pain, nausea, vomiting and diarrhea and corrosion of the mucous ...
#7 Safety Considerations
Vinegar is safer to use than CLR. CLR has some strong chemicals in it, so you need to be careful when you use it.
The product works by breaking down mineral buildup and rust pretty quickly, so leaving it overnight doesn't necessarily make it more effective. In fact, it could damage your toilet if it's left too long - especially overnight. You should only let it sit for just two to five minutes, depending on how bad the buildup is.
By the time it reaches the septic system it is neutralized with water.
Products contain no harsh chemicals, like ammonia, phosphates, or alcohol. And are non-abrasive and have little-to-no VOCs*. They are safe on aluminum, plastics and rubber seals.
Disposal information
Dispose of unused product in a permitted hazardous waste management facility following all local, state, and federal regulations. Follow label warnings, since containers may retain some reside of the product. Processing, use or contamination of this product may change the waste management options.
Routes of Exposure Eyes, Skin, Inhalation, Ingestion. Skin Prolonged contact may cause dermatitis, and itching. Inhalation Harmful if inhaled, but no adverse effects expected under typical use conditions. Ingestion Oral burns, vomiting, and gastrointestinal disturbance.
Preventing Cross-Contamination
Without gloves, you risk transferring germs and contaminants from one surface to another, inadvertently causing cross-contamination.
Apply directly to the stain with a brush, cloth or sponge. After 2 minutes rinse promptly with cold water. Never leave Calcium, Lime and Rust Remover on an area for longer than two minutes. If the stain does not disappear, repeat this process and add more Calcium, Lime and Rust Remover solution as necessary.
When it comes to being good for the environment, CLR has a slight advantage. It's biodegradable and part of the EPA's Safer Choice Program, which recognizes products with safer ingredients. Lime Away works well, but it doesn't have the same environmental certifications.
Apply the solution to the glass surface using a damp cloth or sponge, ensuring it does not come into contact with the lead or frame. After allowing the solution to sit for 2 minutes, gently hand-remove it from the glass using a damp cloth or sponge.
Quickly removes tough surface mold and mildew stains on a wide variety of surfaces. Bleach-free formula quickly removes tough surface mold and mildew stains. Powerful foam spray removes tough mold and mildew stains from tile, showers, bathroom surfaces, hard plastics, wood, grout and fiberglass.
Mix 50/50 solution of CLR with water in a bowl. Submerge the faucet or shower head in the solution for 2 to 3 minutes.
SKIN CONTACT: Causes skin irritation. Prolonged contact may cause dermatitis, and itching. INHALATION: Irritation, breathing difficulties, headaches, dizziness. INGESTION: Oral burns, vomiting and gastrointestinal disturbance.
Breathing in chemical fumes is never a good idea and CLR is no exception. Before using CLR, open windows and doors, turn on vents, and try to avoid being in an enclosed space like a shower stall with a closed door.
Memory Leaks Due to Unused Objects that are Still Referenced. If a program never refers to an object again, but there is some path leading to that object then the Garbage Collector does not release its memory. Another very well known limitation of . NET is its large object heap.
Customers say the Zep Calcium, Lime, and Rust Stain Remover is an effective and cost-efficient alternative to more expensive brands like CLR. Many users appreciate its ability to tackle tough stains, particularly in toilets and on various surfaces affected by hard water.