Yes, this will work with your dishwasher. A: This is needed for a hard wired installation as the cord that comes with the dishwasher is only for plugging into a three prong outlet. The plug side of this is for connecting to the back of the dishwasher and the junction box at the end of it is for a hard wired connection.
All Bosch dishwashers are compatible. The box cord is used in hard-wired installations. Installation instructions can be found here.
All Bosch dishwashers come with 110v power cord for plugging into wall outlet. If you are hardwiring then you must use the Bosch power cord with junction box accessory.
Dishwashers are preferably hardwired. It is a customary law of the National Electrical Code (NEC) to hardwire our dishwashers. Although it can also be plugged into an electrical outlet and still function properly, it is against the law of the NEC meant to protect us and our household appliances.
Unlike plug-in appliances, a dishwasher must be hardwired and hooked up to the home's plumbing. If you're for the challenge of installing it yourself, you can save a lot of money.
Dishwasher Circuit
When installing a dishwasher, the circuit should be a dedicated 120/125-volt, 15-amp circuit. This 15-amp circuit is fed with a 14/2 NM wire with a ground. You may also elect to feed the dishwasher with a 20-amp circuit using 12/2 NM wire with a ground.
Dishwasher Electrical Connections
A dishwasher runs on 120-volt power, and the terminals for the electrical connections are behind it, near the floor. You may see a brass screw -- designed for the hot wire -- and a silver one for the neutral wire. Or you may see a black hot wire and a white neutral one.
A: This is needed for a hard wired installation as the cord that comes with the dishwasher is only for plugging into a three prong outlet. The plug side of this is for connecting to the back of the dishwasher and the junction box at the end of it is for a hard wired connection.
This is the part number for the manufacturer's cord and it is just over 5 1/2 feet long and will only require that you plug it in to the back of the dishwasher and then into the wall. No need for an electrician or to tackle wiring the junction box.
Electrical Requirements
For operation in the United States, most Bosch dishwashers run on a 120-volt, 12-amp circuit.
Newer Bosch dishwashers use a special power cord that plugs into the back of the unit. It comes with a standard 3-prong cord that works if you have an outlet for power. If you have a hardwired dishwasher, this box allows for an easy-to-wire junction box with a white, black and green terminal.
It comes with a power cord for a conventional three prong outlet. If you want to direct wire, you need to buy a Bosch accessory for that purpose.
The manufacturer of Bosch and other dishwasher brands today recalled 469,000 dishwashers because the power cord can overheat and catch fire. The recall is an expansion of a two-year-old recall that included 194,000 Bosch, Thermador, Gaggenau, and JennAir dishwashers for a total of 663,000 models in the U.S. and Canada.
Each dishwasher comes with a junction box (with power cord) to be installed in a cabinet next to the dishwasher cutout. It can be installed by an installer, servicer, technician, electrician or other qualified professional and is intended for hard-wired installations.
Kitchen dishwashers installed in dwelling units require GFCI protection whether hard wired or cord and plug connected. Code Change Summary: A new subsection was added regarding dwelling unit kitchen dishwashers. Now, outlets that supply dwelling unit kitchen dishwashers must have GFCI protection.
Since 15A outlets have been the standard for so long, almost all small home appliances are designed to work with a 15A outlet. Some high-end dishwashers do require a 20A circuit, but most mainstream units are still 15A.
The receptacle should not be behind the dishwasher. To access it; you would have to remove the dishwasher. Just like the dishwasher drain and water line that go to the sink water valve and drain; the dishwasher electric cord plug should go to a receptacle under the kitchen sink.
Door in open position . .. . The dishwasher comes with a seven (7) foot drain hose. A 1.25" access hole must be made to allow the drain hose to be run to the drain connection location.
To hardwire a dishwasher means to connect the machine directly to the circuit wire that leads to the home's electrical panel, rather than simply plugging the dishwasher cord into an electrical outlet.
The rubber flap on Bosch dishwashers is a safety feature that helps prevent dishes from being damaged if the dishwasher is accidentally knocked over. The flap helps to keep water and dishes inside the dishwasher, rather than spilling onto the floor.
Dishwasher – A large range of dishwashers use the standard current of 110 volts. It is best to use an outlet that has a Ground Fault Interrupter or GFI. This will provide an extra precaution if the outlet gets wet. A GFI is designed to trip or disconnect power to prevent electrocution.