To clean an inflatable pool, you will need to drain the water, scrub the lining with a cleaning solution, and refill every few days. Typically, larger inflatable pools will not need to be drained. Instead, you will sanitize the water and balance the pH regularly with chemicals such as chlorine and pH balancers.
Dump or drain the water, then wipe down the empty pool with a solution of bleach and water (read the label for cleaning ratios) , wearing rubber gloves while cleaning. Or, use gentle dish detergent to cut through the dirt. Rinse thoroughly to remove any bleach or detergent.
2. Use Chlorine Tablets. The best way to obtain a constant, consistent chlorine level in the pool is to use 1″ tablets or 3″ tablets in a floating chlorinator, aka chlorine floater. Most inflatable pools need just half of one 3″ tablet per week, or several 1″ tabs at a time, replaced promptly when they dissolve.
For small inflatable pools that you don't want to empty and refill so often, you can add a small amount of bleach to the water to sanitize it. Add about a 1/4 tsp for every 10 gallons of water, or for medium sized inflatable pools, add 2 1/2 tsp for every 100 gallons.
To keep the pool clean without a filter, it is necessary to use chlorine with a flocculant or to use a flocculant chemical. This product groups the impurities that float in the water, causing them to fall to the bottom of the pool so that they can be removed later with a cleaner.
Many of us use household bleach, a common brand name being Jik, to clean our homes. Bleach itself is a diluted solution of sodium hypochlorite and it is this ingredient that can be used to lighten, sanitize and disinfect.
Many of us want to cool off in a backyard pool, but we also want to make sure there are no dangerous bacteria lurking in these pools that do not have any filtration system in place. You can use Clorox® Regular Bleach2 to treat the water in a child's wading pool.
It's also one of the most underrated pool cleaning tools. Adding chlorine tablets to your inflatable pool will help kill bacteria and prevent algae buildup. These tablets may also help you balance the pH level in your water.
Use a solution of warm water and white vinegar for a pool that is only slightly grimy. You only need about 1 part vinegar to 10 parts water. Dip your rag in the solution and wipe the pool clean. Toss the rag in the trash.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Get rid of any remaining water by wiping down with an old towel or rag. Make your own homemade cleaning solution either using one part bleach to five parts of water, or equal parts of vinegar and water. Adding a little bit of the solution as you go, clean the sides of the pool using a scrubbing brush.
It is a good idea to wait at least 20 minutes after adding the water balancing chemicals. If you use calcium chloride in your pool, you should wait at least 2 hours to swim.
Salt is often presented as a healthier alternative to adding chlorine to a kiddie pool, since saltwater is gentler on the skin.
Domestos is a British brand of household cleaning range which contains bleach (primarily sodium hypochlorite NaOCl).
They are identical in every way, with the exception of strength. Household bleach is usually a 6% concentration (although some of the cheaper stuff is 3%), while pool chlorine can typically be found in strength between 10% and 12%. All of this is sodium hypochlorite, and works the same in sanitizing your water.
The strongest bleach is Clorox Regular Bleach2, which is the best bleach for cleaning, stain removal, and whitening. It's the only bleach that can be used around the house to clean and purify a wide variety of surfaces.
An inflatable kiddie pool still needs chlorination. Keeping the pool water balanced in an above-ground pool might have given you headaches, but this won't be nearly as difficult. All you need is a floating chlorinator and some chlorine tablets.
Skimmer Net
With excessive debris in the water like leaves, pine needles, and dirt, the pool walls will get slimy and grow mildew faster.
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times.
It takes a lot of chemicals to make pool water safe for swimming. Untreated water can accumulate harmful Escherichia coli and Salmonella bacteria and protozoans such as Cryptosporidium parvum and Giardia lamblia.