Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl. porcelain tiles. ceramic tiles.
For polished or glazed porcelain tile, wipe with hot water and scrub stains with a bristle brush. Wash with vinegar solution or a commercial tile cleaner diluted to half strength. Wash one more time with hot water to rinse off the cleaner, then dry with a clean towel.
A solution of vinegar diluted 1-to-1 with water or a diluted commercial ceramic tile cleaner can be used to clean stains.
The Swiffer Wet Jet makes mopping my tile and laminate floors so much easier!
Mop the Floor
Vinegar is excellent on glazed porcelain tiles as it brings out its shiny exterior. After mopping, rinse the floor once more using clean water. Make sure to wipe the tile dry with a microfiber cloth to avoid streaking and to prevent water from penetrating the grout.
Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl. porcelain tiles. ceramic tiles.
Do not use cleaning products that contain acids or ammonia (and other harsh chemicals) as these can damage grout and glazed surfaces of the tile. Choose products that are compatible with your grout to avoid damage or discoloration of the grout. Always dry your porcelain thoroughly after cleaning.
With the Swiffer Sweeper, you can skip the mop and bucket and instead use a wet cloth for spills, stains, and stuck-on gunk. Depending on the task at hand, choose either a Swiffer Sweeper Wet Mopping Cloth or a Swiffer Sweeper Wet Heavy-Duty Mopping Cloth.
Overall, microfiber mops have more pros than Swiffer mops. Microfiber mops can be used as a two-in-one to both sweep and mop at the same time. However, a Swiffer mop can typically only clean after the sweeping has already been done.
For a one-step solution to maintaining your tile floors, it's hard to beat the convenience of the Swiffer WetJet Starter Kit.
For most types of tile, including porcelain and ceramic, you only need one key ingredient: A DIY mixture of warm water and dish soap will do the trick. Follow these steps to clean tiles: Spray the water and dish soap solution on the tile surface. Wipe the area with a damp microfiber towel or cloth.
You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3' x 3' area and start mopping.
Wet clean: Plan to mop the tile floor in your kitchen once every two weeks and your bathroom tile floor once a week (germs tend to build up in bathrooms).
Hygiene: Porcelain tiles have very low porousness, making them easy to clean and disinfect. They are also resistant to stains thanks to this. You don't have to worry about scrubbing them, because they are easy to clean and keep hygienic. This makes them even more attractive for busy households with children and pets.
While vinegar is safe to use on laminate, vinyl, porcelain, and ceramic tile, it is best to use it sparingly since the acid in the vinegar can dissolve the finish on your floor. Therefore, when you are using it on tiled floors, you want to make sure you cut it with water or rinse it completely with water.
Wet Swiffers.
Whether it's the wet cloths or the Swiffer Jet, “they're not effective, and floor ends up sticky,” Hoffman said. I've found the same. Instead, if I'm looking for an alternative to the bucket and mop, I love the O-Cedar Microfiber Spray Mop.
Even if you live by yourself or don't experience frequent activity in your home, your floors still need attention if you want it to remain spotless. In this case, we recommend giving your floors sweep and mop sessions once a week. Dust and dirt can accumulate over time if no one is going in and out of different rooms.
Ans: For households with a variety of floor surfaces, the Swiffer WetJet is perfect. Almost any type of floor can be cleaned with this solution, including hardwood.
“And the floor can end up sticky and even dirtier because their cleaning solvent tends to dry very fast, leaving a sticky residue if not cleaned fast and well.”
Instead of buying a new bottle of Swiffer cleaning solution every. single. time. we make our own with just 3 ingredients: distilled water and vinegar – and a couple of drops of dish soap.
You may have guessed where this is going: porcelain tiles are not waterproof, they are water resistant. That means that if you submerge them in water long enough, then they will eventually allow that water to seep through.
The answer is that, while porcelain tiles cannot be said to be entirely waterproof, they are resistant to water. There are very few things that are truly 'waterproof', as this would require them to be completely impermeable to water.
Try vinegar and water, 50/50 solution. If you have very dirty floors add more vinegar. If that doesn't cut the dirt I will recommend you purchase a product from Laticrete called Stone Tech Restorer. This is a professional grade tile cleaner that will clean your tile.