Pine-Sol can help you with shower cleaning, walls, and more. Step 1 Clear shampoo, soap and other items from your shower so you can hit all the corners before you clean. Step 2 Mix ⅛ cup of Pine-Sol® in 1 gallon of warm water. Step 3 Wipe down your shower walls with the mixture.
Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood. Q: Where should I NOT use Pine-Sol® Cleaners? A: We do not recommend using Pine-Sol® Original Multi-Surface Cleaner on aluminum, copper or marble surfaces.
If heavily soiled walls, pine sol or mr clean diluted 1/4 cup to a gallon of water with a microfibre.
Don't use Pine Sol. Or Lestoil. Or Murphy's Oil Soap. Reason for all 3 is the same. They all have oil as an ingredient for cleaning. Grout absorbs oil and it stays inside the grout. Pine Sol does not have much pine oil. But why have any? There are lots of good neutral cleaners that will not stain the grout at all.
Use Pine-Sol® on shower tiles, walls, fixtures, and even plastic shower curtains. Use your bathtub as your Pine-Sol® mop bucket when you hit the floors.
Tips for Deep Cleaning Your Bathroom Shower
The combination of one-part hydrogen peroxide to two parts washing soda will adhere to your grout tiles rather than dripping away imediately.
The best solution for cleaning walls is mild soap and warm water, as the soap will work hard to remove grime without harming the painted surfaces.
Clean a bathtub and do a deep disinfecting clean to your tub. Step 1 Stop the tub drain and fill your bathtub with about two gallons of warm water. Step 2 Add ¼ cup of Pine-Sol® to the water. Step 3 Dip a sponge or scrubber into the bathtub and wipe down the tub and faucets.
After cleaning with diluted Pine-Sol, make sure you rinse thoroughly. Using a damp mop with plain water after cleaning can help ensure no residue is left behind.
In 2022, certain Pine-Sol cleaners were recalled due to a potential health risk involving harmful bacteria.
If you have a problem with wasps, hornets, yellow jackets, or bees, Pine Sol can spare you from painful stings. Remember not to use it on honey bees – we need them to help pollinate our food plants – but for other hive insects, spray full strength Pine Sol as an insecticide.
If you must use pine sol, I'd definitely follow with a clean water washing to remove residue especially for safety of animals and children.
Most of these tips include the use of sodium carbonate, white vinegar or oxygen-based bleach (hydrogen peroxide, sodium percarbonate or sodium perborate as opposed to chlorine-based bleach). Oxygen-based solutions are indeed a safer alternative for indoor cleaning, are more eco-friendly and can be extremely effective.
In fact, LovelySkin CEO and board-certified dermatologist Dr. Joel Schlessinger recommends cleansing skin with your hands over a shower loofah or washcloth.
Fill the bathtub with hot water, ensuring that the stained areas are submerged. Add a generous amount of dish soap or liquid detergent to the water. Allow the bathtub to soak for at least 30 minutes or longer for stubborn stains. Drain the water and use a microfiber cloth or sponge to wipe away loosened grime.
Pine-Sol contains chemicals that can help break down organic matter clogging your drains, such as grease, hair, and soap scum.
Step 1 Add about ⅛ cup of your favorite Pine-Sol® scent to a gallon of water. Step 2 Dip a sponge, rag or cloth in the mixture and wring out until it's lightly damp. Then, start wiping down the walls from top to bottom, using Pine-Sol® at its full strength on stubborn marks. Step 3 Wipe down the walls with water.
Flat, eggshell or stain finishes is less durable and more likely to rub off. Try not to scrub too hard or wash with too abrasive a cleaner. Avoid harsh chemicals and use a mix of mild detergent and water. Semigloss or glossy finishes, popular on kitchen walls are durable enough to stand up to degreasing cleaners.
Wetwall panels can be cleaned using normal soap, water and a soft cloth. Alternatively a non-scratch liquid cleaner can be used such as ShowerWall SuperClean. On a day to day basis or after every use it's best to rinse the panels and then clean off the excess water with the squeegee or a soft cloth.
Steam cleaning is one of the most powerful ways to clean grout without the use of harsh chemicals. Professionals often use steam to loosen the dirt and other particles trapped in the grout without needing to scrub manually.
Baking powder is actually a tried-and-true way to clean bathroom grout. First, mix some baking powder with water to create a thick paste. Then apply this paste to the grout and let it sit for about an hour. The grout can then be rinsed with clean water and any reside that remains can be wiped away with a cloth.