You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.
Pine-Sol is safe on hardwood floors and can be used to clean and disinfect them. What is essential is to use the right concentration and correctly follow the instructions: Sweep or vacuum the floor to remove loose dirt and debris. Take ¼ cup of Pine-Sol and mix with a gallon of water in a bucket.
In most homes, the best wood floor cleaner is plain old soap and water, and the only tools you need are a broom, vacuum, and mop. The best mop for wood floors is a microfiber flat-head or string mop you can easily wring out.
Usually no rinsing required. On wood surfaces, do not allow puddles of cleaner to remain. *Not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn flooring.
Wood floors can be mopped just like vinyl or tile. False: While surface-sealed wood floors are more water-resistant than unsealed or wax-sealed floors, they still require a different mopping technique. With vinyl, you can get away with more water and a varied pattern of mop strokes.
Don't use straight ammonia, alkaline products or abrasive cleaners. They'll dull or scratch the finish. Don't rely on lemon juice or a vinegar-and-water solution to clean hardwood floors. "I don't recommend using vinegar or lemon juice, at least not in large quantities, as these can damage the floor's seal," said Wise.
A mixture of 1 part Chlorine Bleach, (Clorox) to 32 parts water (½ cup bleach per gallon of water, or 4 teaspoons bleach per quart of water) will need to sit on surfaces for 5-10 minutes in order to disinfect them. We found this did not harm either of our wood finishes.
The good thing about the fabuloso cleaner is that it can be generally used for all the wood floor surfaces. It is a good multi-purpose cleaner of which you can practically use to effectively clean the floor surfaces around your home.
What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.
Use a damp-mop with a flat-head mop and microfiber pad or a microfiber string mop that has been thoroughly wrung out when it looks dingy. Move with the grain, and control the amount of cleaning solution by using a spray bottle, aiming for a heavy mist or gentle squirt of about a half teaspoon per 2 square feet.
Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
You can safely use Swiffer products on hardwood floors. For a quick clean, try Swiffer WetJet Wood Starter Kit. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won't damage them.
You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3' x 3' area and start mopping.
What are the ingredients in Fabuloso® or Fabuloso® Complete? Fabuloso® Complete Sparkling Citrus Ingredients: Water, Sodium Dodecylbenzenesulfonate, Sodium Chloride, Lactic Acid, C9-11 Pareth-8, Fragrance, Colorant.
Sweep or vacuum, then mop with a commercial wood floor cleaner or solution of a quarter-cup of dish soap and a gallon of warm water to lift any lingering grime. Give the floors a final pass with a clean, water-dampened mop to remove any cleaner residue. Dry completely with a soft, clean towel.
Such products have a high potential of ruining the finish of your wood. They can react with the polyurethane seal, completely destroying it, or create an unsightly, sticky, oily residue that can make your floor cloudy or slippery.
a disinfecting solution of 1/2 cup Clorox® Disinfecting Bleach and 1 gallon water. the area, then mop or wipe with the disinfecting solution. for 5 minutes, then rinse thoroughly. Air dry.
When you're doing a DIY woodworking project, it's a good idea to start with a fresh, clean surface. But whatever you do, if you're working with untreated wood, don't use a Clorox wipe to clear off dust and dirt. Because untreated or unpainted wood is porous, disinfectant wipes can leave it with a big, ugly stain.
Finally, when used and applied the right way, Pine Sol doesn't leave behind any residue that will leave you with an unsightly hardwood floor surface. Wax and oil-based cleaners, on the other hand, leave behind a hazy residual substance.
An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). For spot cleaning needs, sprinkle baking soda on the affected area and scrub with a sponge. To ensure the area is thoroughly clean, rinse with warm water and dry.
Swiffer WetJet is an all-in-one mopping system that's ready to use right out of the closet. Start with a fresh pad and spray the cleaning solution through the uniquely designed, dual nozzled WetJet mop. Then watch the dirt and grime dissolve while the thick pad absorbs it deep inside so it doesn't get pushed around.
Bona's mop distributes cleaning solution more evenly than the Swiffer WetJet. Bona's mop head is significantly wider (15 inches) than Swiffer's (9 inches), which makes it easier to clean large rooms but more difficult to navigate in small spaces. Bona's spray mop comes with a reusable microfiber mop pad.