Do Not Use On Granite or Marble. If you have soft surface countertops like granite or marble, step away from the magic eraser. You can use them on laminate, Corian, quartz, and other solid surface countertops, but do a spot check.
Use a white, light-duty Scotch-Brite™1 scrub pad and a nonabrasive cleanser such as a general purpose surface cleaner. 3. A Magic Eraser can be used to remove residual stains.
Grease, fat and oil – use a small amount of dilute bleach and rub with a microfiber cloth. Make sure you rinse the area thoroughly with warm water afterwards to prevent staining. Minerals, lime scale and hard water – apply lime scale remover or vinegar with a microfiber cloth and leave for a few minute before rinsing.
Keep nail polish remover, bleach, detergent, permanent markers or inks, and oil soaps away from your Corian® Quartz.
Magic eraser may also be used to fight tough quartz stains, simply wet the magic eraser and apply in gentle, circular motion. Clean the area thoroughly with water and dry with a clean towel after. For tough to fight grease residue, you may use degreasing cleaners.
STEP FOUR: RINSE AND RETIRE.
Before you retire to the couch, rinse out your Magic Eraser and give your newly freshened surfaces a water wipe down, too. If what you cleaned will come in contact with food, you'll need to wipe it with a wet rag or paper towel, so it will be ready for the next time you meet again.
Wipe the countertop surface with the help of an ammonia-based spray cleaner or warm soapy water for minor residue buildups, or with an abrasive cleaner for heavier buildups. This will help to remove minor scratches, scorch marks, and very stubborn stains from the Corian countertop and will revitalize it.
Never put hot pans, in particular cast iron pots or hot casserole dishes directly on a Corian® top or in a sink. Such heat can damage any surface. Preventing Other Damage Be aware of what your Corian® surface has been exposed to. Harsh chemicals may damage the surface (e.g. paint removers, oven cleaners, etc.)
BAR KEEPERS FRIEND Powdered Cleanser 12-Ounces (1-Pack)']
A: Bar Keepers Friend should be safe on Corian as long as it is for occasional use only.
If you are noticing that your Corian® sink is not as white as it once was, you can easily fix this with simple household bleach. It is recommended that you mix ½ cup of bleach with warm water to each sink bowl and let the solution sit for a minimum half an hour.
Use a multi-surface cleaner such as Windex® Multi-Surface Disinfectant Cleaner to clean and shine countertops made of sealed granite, sealed marble, Corian®, Formica® and more.
As a first step, wash with hot soapy water and dry completely. This will remove any dirt and may remove some hard water deposits. For a blotchy appearance from hard water deposits first use a cleaner formulated for removing hard water marks, such as CLR®.
HOPE'S Perfect Countertop Cleaner and Polish 22-Ounce, Streak-Free Multi-Surface Cleaning Spray, Safe on Stone, Laminate, CORIAN, Granite, Quartz, Marble, Pack of 1.
Corian® Solid Surface has been, and continues to be, the most popular brand of solid surface material in the world for over four decades.
Corian is a branded name used in reference to solid surface countertops. These surfaces are a step up from laminate but still lack the durability and aesthetics that would allow them to compete with natural stone such as quartz. This is one of the primary reasons Corian offers poor resale value compared to quartz.
This material is designed to withstand everyday wear and tear and last for decades, usually up to 50 years, without the need for major repair or replacement. However, should it be damaged, the solid surface can be repaired in the event of minor damage.
If the stain persists, moisten a cloth with Goo Gone®4, or a comparable product, and rub it into the stain. Rinse thoroughly with warm water to remove any cleaner residue.
Do Not Use On Granite or Marble. If you have soft surface countertops like granite or marble, step away from the magic eraser. You can use them on laminate, Corian, quartz, and other solid surface countertops, but do a spot check.
Because Corian has been manufactured with Resilience Technology ™ in a way that allows sanding, cutting, carving and so forth, these inherent benefits also mean that they react much like stone and wood worktops if treated harshly and the surface will show scratch marks, dull areas, and heat damage.
You can also use Soft Scrub and a green Scotch Brite pad to remove residue. NOTE: Do NOT use Soft Scrub on the countertop surface for everyday cleaning. Corian is heat resistant, but it is NOT safe to place hot pots and pans directly on the surface.
Magic Erasers are abrasive, so avoid using them on delicate countertops such as marble and granite. Not only can you damage the sealant but the eraser may make the countertop appear dull. All of these cleaning products can cause more harm than good.
The secret behind these types of erasers is a material commonly called melamine foam. With just a little water, melamine foam can dig in and destroy stains that other products can't touch.
I got the Eraser wet, put a dry towel beneath the stain, and worked at it using the corner of the sponge. As I would have predicted, the red spot totally disappeared — I think the Dawn cut through the oil in the stain, and the Eraser had no problem at all “erasing” the tomato residue. A winning combination!