Can you use Lysol clean and fresh on vinyl floors?

Author: Dr. Leann Bosco MD  |  Last update: Sunday, October 8, 2023

This cleaner is excellent for mopping. I use it on my vinyl floors and you can really see the results in the water afterwards. Not only does this product work on floors, but it works wonders on both kitchen and bathroom countertops, bathtubs, and toilets.

Is Lysol cleaner safe for vinyl floors?

You don't need to dilute Lysol's multipurpose cleaner because you can use it at full strength on vinyl floors. Once you apply solution to the entire floor, allow it to sit for about five minutes to fully disinfect the floor. Frequently rinse and wring out the mop when it gets dirty.

Can you use Lysol Power and Fresh on floors?

This cleaner is a versatile disinfectant that works on a wide range of hard, non-porous surfaces. From kitchen counters and door handles to hardwood floors and light switches to bathroom surfaces like sinks, tubs and tile.

What is the best cleaner for vinyl floors?

Commercial vinyl floor cleaners are available, but you can make a simple, effective cleaner for vinyl floors by mixing apple cider vinegar with water. The vinegar's acidity removes dirt without leaving a soapy film. Mix one cup of cider vinegar with a gallon of hot water.

Is Lysol clean & Fresh Multi-Surface cleaner safe for laminate floors?

Both Pine-Sol and Lysol are safe to use for laminate floor cleaning, and they disinfect as they clean too! There are several commercial disinfectants that are safe to use on laminate wood floors. Always read the label before using the cleaning solution on your floors to avoid damaging them.

How to Use Lysol Multi-Purpose Cleaner

What is the best way to clean and sanitize laminate floors?

Laminate flooring is cost-effective, easy to install, durable, and easy to clean and maintain as long as you care for it properly. Because laminate flooring is sensitive to excess moisture, it should only be damp cleaned, making Clorox® Scentiva Disinfecting Mopping Cloths the ideal choice for routine or deep cleaning.

Does Lysol clean and fresh contain bleach?

A: No, Lysol All Purpose Cleaner does not contain bleach.

What not to clean vinyl floors with?

Vinyl Flooring “Don'ts”

Don't use wax or solvent-based polishes. Don't use ammonia or ammonia-based cleaning solutions. Ammonia can break down the vinyl and cause it to crack.

What is the best mopping solution for vinyl plank floors?

If you're looking to make your own floor cleaner for your vinyl plank floors, lots of folks swear by adding a cup of apple cider vinegar to a gallon of warm water. You can mop with it directly, or place it in a spray bottle for spot cleaning as you need it.

How do I keep my vinyl floor shiny and clean?

Add a bit of baking soda to your regular floor cleaner to help keep the vinyl fresh, smooth, and shiny. Applying a small amount of WD-40 lubricant is a safe way to remove any scratches or scuffs without damaging the vinyl. You can also use a bit of jojoba oil to gently polish vinyl floors.

What surfaces can you use Lysol all-purpose cleaner on?

Lysol® Multi-Surface Cleaner can be used on hard, non-porous surfaces, such as:
  • Floors.
  • Appliance exteriors.
  • Washable walls.
  • Countertops.
  • Toilet bowl exteriors.
  • Bathtubs.
  • Showers.
  • Doorknobs.

Do you have to rinse Lysol floor cleaner?

No rinsing required. To clean soap scum and greasy soil: Allow product to sit to penetrate soil before wiping clean. Repeat if necessary.

How do professionals clean vinyl floors?

Professionals clean vinyl floors using specially formulated cleaning solutions and hot water extraction. The combination of these methods delivers powerful vinyl floor cleaning action that leaves your vinyl look brand new.

Is Pine Sol OK for vinyl floors?

Pine-Sol Multi-Surface Cleaner – Yes, Pine Sol on vinyl floors is a fine option; however, use sparingly with water. Do not oversaturate your vinyl floors with too much water, use just enough to disinfect the floors.

How do you disinfect vinyl bathroom flooring?

The best way to clean luxury vinyl, and possibly disinfecting the surface is by using 1 gallon of warm water and 1 cup of white vinegar.

How often should you mop vinyl plank flooring?

One essential tip for maintaining your luxury vinyl floor is not to mop too often. Once a week or twice a month is plenty.

Can I use Swiffer wet mopping cloths on vinyl plank flooring?

Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl.

Can you use Fabuloso on vinyl floor?

DO NOT use All-Purpose or Multi-Purpose cleaners, detergents, abrasive cleaners or “mop and shine” type products (such as Bleach, Pine-Sol, Clorox Soft Scrub, Fabuloso, Rejuvenate, Mop & Glo, Mr. Clean, Murphy's Oil Soap and similar, unapproved cleaners), as they will dull the finish and sheen of the flooring material.

What can ruin vinyl flooring?

Never use a detergent that is abrasive. Vinegar or “mop and shine” products may leave a film on your film, rather than give you that shiny floor that you seek. Never use a wax polish. Never use an abrasive scrubbing tool on your floor.

What can damage vinyl floors?

Abrasive sponges, steel wool, and other rough materials can easily scratch — and even eat through — the protective coating atop your vinyl plank flooring. Use a mop or soft bristled brush if you need a deep, scrub-a-licious clean!

What is the safest way to clean vinyl?

  1. Wipe gently. Remove all dust and static using a microfiber cloth, using very little pressure to avoid driving any particles further into the grooves in the vinyl. ...
  2. Rinse. ...
  3. Apply Simple Green solution. ...
  4. Damp-wipe clean. ...
  5. Dry. ...
  6. Spin and store properly.

What is the PH of Lysol clean and fresh?

8.5 to 9.5 [Conc.

What are the active ingredients in Lysol clean and fresh?

Known Ingredients
  • Ingredient.
  • ALKYL DIMETHYL BENZYL AMMONIUM CHLORIDES (C12-16) ...
  • SODIUM BORATE. ...
  • AMMONIA GAS. ...
  • FRAGRANCE. ...
  • HEXYL CINNAMAL. ...
  • FD&C YELLOW NO. ...
  • SODIUM TRIPOLYPHOSPHATE.

Is Lysol a good floor cleaner?

To properly disinfect your floors without rolling the dice on damaging them, try a store-bought cleaning spray or wipe (like Lysol) that contains a chemical Alkyl Benzyl Ammonium Chloride, which Richardson says is a biocide that would be effective and safe on porous surfaces like wood.

Previous article
Do silk pillowcases retain bacteria?
Next article
Does a cracked driveway mean foundation problems?