DRYLOK® is ideal for interior/exterior, above/below grade masonry including cinder and concrete block, stucco, brick, and bare concrete swimming pools. Features Flexible Encapsulated Polymers for a beautiful, smooth waterproof finish.
A. Yes, DRYLOK® Masonry waterproofer is ideal as a foundation waterproofing coating. Wait 24 hours after the application of the second coat to backfill. Q.
Use DRYLOK® Latex Masonry Waterproofer to waterproof interior, exterior, above and below grade walls and more: basements, living spaces, laundry rooms, dry storage, hobby corners, fish ponds, retaining walls, birdbaths, and more.
ByBrittney. There is no need to use DRYLOK over any other cementitious-type waterproofing paint in good, repaintable condition, either inside or outside.
May produce an allergic reaction. Toxic to aquatic life with long lasting effects (GHS category 2: aquatic toxicity - acute and/or chronic).
Sealing basement walls against water seepage is often unpleasant because of the strong odor of solvent-based waterproofing paints. A new latex-based waterproofer from the manufacturers of Drylok, one of the best-known basement-wall paints, eliminates much of the odor while retaining Drylok's sealing ability.
Working with DRYLOK Masonry Waterproofer couldn't be much easier. Low-odor and fast-drying, the latex base ensures that the product cleans up easily with warm, soapy water. Once it has cured, the waterproof coating resolves to a high-gloss finish that's easy to clean, if necessary.
How Long Does Drylok Need To Dry Before Rain? The following are the drying times: To touch: 1 hour; To recoat: 6 hours; Heavy traffic: 24 hours; Rain free: 24 hours. Note: The drying time may be affected by the film thickness and temperature.
DRYLOK Masonry Waterproofer can be used over wood, metal, or terra cotta. The DRYLOK Masonry Waterproofer should not be used on any other surface other than bare masonry and concrete.
Yes. You can paint Drylok over mold, however it should only be painted over once the necessary steps have been taken to treat and remove the underlying issue.
DRY TIME: 2 hours • To recoat: 3 hours Note: Maximum cure and dry time will be prolonged when slightly humid and damp, cool conditions prevail. CLEAN UP: Warm soapy water Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.
For maximum protection, I opted for DRYLOK Extreme. Recommended for the most demanding conditions and capable of resisting the hydrostatic pressure equivalent to a 33-foot-tall wall of water, DRYLOK Extreme does what other, broadly similar products do, only better.
You can use DRYLOK® Floor & Wall Masonry Waterproofer on floors and walls. It holds up to foot traffic as a finished coat and can be used before applying floor paint, or latex-based adhesives.
Oil Base DRYLOK® Masonry Waterproofer
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco and brick, retaining walls, fish ponds, birdbaths, basement walls and foundations.
ByBrittney. The DryLok coating can be applied to wet basement walls to prevent damage to them. Powdered and ready mixed, it can be painted directly onto the wall in a matter of minutes. In addition to being suitable for basements, DryLok is also commonly used in birdbaths and fish ponds.
Yes and no. DRYLOK® may be used over any other cementitious-type waterproofing paint in good, repaintable condition, either inside or outside. However, DRYLOK® cannot be used over an oil or latex-based paint on the inside of a building.
DRYLOK® penetrates and bonds to porous masonry surfaces, creating a waterproof barrier on interior, exterior, above and below grade walls. COVERAGE (per gallon) 140-210 Sq. Ft.
Yes, you can paint drylok over the existing drylok provided it is in a paintable condition. Nonetheless, don't be persuaded to paint it before it's completely dry. You can either use concrete floor paint or masonry waterproof to recoat it.
While DRYLOK® Etch will remove efflorescence and help prevent it from reoccurring, understand that efflorescence comes from salt deposits found in the block itself and can reoccur at any time.
For best results DRYLOK® Extreme should be well stirred and sprayed at room temperature (70°F and 60% relative humidity).
The DRYLOK E1 1-Part Epoxy Floor Paint New Low VOC 50 G/L Formula is a revolutionary 1-part epoxy floor paint that utilizes Advanced Epoxy Technology for greater protection and excellent durability.
Yes you can use DRYLOK® Concrete Floor Paint on your porch. It's designed for use indoors and outdoors and will stand up to the elements.
Painted the basement floor, goes on easy with a roller. Coverage was good, dries in a couple of hours where you can walk on, waited 24 hrs to place objects on the floor. Paint covers well.
In addition to garage floors, basement floors, brick patios, poured concrete and block patios, and wood steps, DryLok can also be used on concrete floors. These surfaces can be beautified and prolong their life with this product.