To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Dish soaps are ideal for this job. While they feature surfactants that are able to remove tough grime like oil and grease, they are also safe enough to use on paving stones without compromising their integrity or appearance.
Mild detergent and water.
If your pavers aren't too dirty, this can be a quick and easy way to clean them without any fancy equipment. Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers.
Generally, interior pavers that have been grouted and sealed just need to be swept, mopped, and spot-cleaned as needed with a gentle, non-acidic multipurpose cleaning solution, such as Enviro Klean All Surface Cleaner or Light Duty Concrete Cleaner. Exterior paver patio hardscaping is even more low-maintenance.
A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate. Rinse and repeat if needed.
Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
Dilute white vinegar with water in a bucket, at Walmart (a 50:50 solution is fine), and apply this natural, eco-friendly cleaning solution to the paving slabs with a firm brush and rinse thoroughly.
The old cleaning solutions are still the best ones, even with pavers. Use your everyday hand soap or dishwashing soap and add in some water to maintain and clean your paver surfaces. Get a bowl or tub of water, put in the appropriate amount of soap, then lightly scrub your paver driveway or walkway using a clean brush.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
Zep Driveway Concrete Cleaner And Degreaser
Zep is perfect for concrete, paving stones, asphalt, and brick. It also works great for cleaning pathways, driveways, patios, and walkways. Zep doesn't require scrubbing, so walkways and driveways will look great with little effort. Buy this in 20-gallon packs.
Baking soda is an amazing household cleaner, and it can work really well on your pavers too.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Try Concrete Stain
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Dish Soap: A great way to clean patio pavers without removing any sand or decorative texture is by simply cleaning with a gentle soap or degreaser like Dawn. Add the dish soap to a container of water, then start lightly scrubbing the dirty spots with a rag, sponge or a stiff-bristled brush.
Cleaning your pavers with bleach has a lot of benefits: Disinfecting the Surface: Bleach is an effective disinfectant and can kill any bacteria or mold on the surface. This will help to prevent any health hazards from occurring. Removing Tough Stains: Bleach is also effective in removing tough stains from the surface.
Mix Dish Soap with Hot Water – Mix these two items together to make a cleaning liquid. Scrub this Material into Your Patio Stones – When doing this, ensure you're using the right brush. A wire brush will scratch your patio. Leave to Soak – Leave the scrubbed in mixture to soak for ten minutes to ensure its done is job.
The pressure washer in combination with a dirt cutter is an excellent option. This removes not only weeds and moss from the surface, but also from indentations. Keeping up with this type of cleaning means that there is less time for weeds to grow. It also helps to maintain the beauty of the paving stones' surface.
By removing the dirt and debris, your pavers will retain their luster longer. If you sweep your paver patio and driveway, and you want it to look even better feel free to wash the pavers with clean water. You can use some soapy water, but be sure to rinse thoroughly your pavers. A simple garden hose will do the trick.
Pressure washing removes the chalky residue, moss and stains, and leaves your pavers looking new again. Once your pavers have been cleaned, it is a good idea to check the condition of your pavers. Make sure they are level and intact, as any repairs should be done prior to moving to the next step.