Small inflatable or plastic kiddie pools and water slides don't have the same protection against germs that a swimming pool, hot tub, or water playground do. That's because it is unsafe to add germ-killing disinfectants, such as chlorine or bromine, to the water in kiddie pools and water slides.
The bleach recommended for pools is chlorine. If you don't want to keep emptying and refilling your small inflatable pool often, this is an option. But, use the right amount of chlorine bleach for pool sanitization. The standard measurement is a quarter teaspoon for 10 gallons.
To fill your 6 foot pool to a depth of 6 inches, you would add 1/8 cup (or 2 tablespoons) of bleach. You want to increase the amount of water by 50% with an extra 3 inches of water, so add 50% more bleach, which in this case is an additional 1 tablespoon of bleach.
According to experts at Pool Solutions, you need four things to keep your kiddie pool clean and safe swim after swim after swim: A stabilized form of chlorine that's 55% to 62% active strength. The chemical name you're looking for here is either sodium dichloroisocyanurate or sodium dichloro-s-triazine trione.
Small inflatable or plastic kiddie pools and water slides don't have the same protection against germs that a swimming pool, hot tub, or water playground do. That's because it is unsafe to add germ-killing disinfectants, such as chlorine or bromine, to the water in kiddie pools and water slides.
Hint: Regular chlorine bleach can be used to disinfect a kiddie pool, according to an article in hunker.com. The article estimates 2 ounces of bleach is needed for a 150-gallon pool. Always test your water to ensure a chlorine level of 1 – 4 part per million (ppm) chlorine.
Salt is often presented as a healthier alternative to adding chlorine to a kiddie pool, since saltwater is gentler on the skin. This is particularly true of Epsom salt, which has a very different chemical composition from regular salt – it is magnesium chloride rather than sodium chloride.
Inflatable pool water can be kept clean using salt to prevent skin disease, eye irritation and other impacts caused by adding chlorine to the pool. Using salt can also cut the cost of chlorine, which tends to be costlier than salt.
The key difference between chlorine and bleach is that chlorine is a natural element, whereas bleach is a solution consisting of many elements. Chlorine bleach can be described as any chlorine-containing bleach that has sodium hypochlorite as the active agent.
Dichlor or liquid chlorine is the best and safest chlorine to use in a vinyl liner pool. Dichlor is fast dissolving and liquid chlorine (bleach aka sodium hyperchlorite) is fast to distribute throughout the water. Trichlor and calcium hypochlorite (cal-hypo) should be avoided as they can bleach and weaken liners.
After you have cleaned your inflatable disinfect it using bleach-free commercial wipes or sprays such as Lysol. You can also make a solution of diluted bleach and water. If you decide to use a diluted bleach solution do not let it sit for more than five minutes after applying or it will discolor your inflatable.
Sanitize pool water with white vinegar
You don't need too much to make a difference — around a 1/4 to 1/2 cup is great.
To keep the pool clean without a filter, it is necessary to use chlorine with a flocculant or to use a flocculant chemical. This product groups the impurities that float in the water, causing them to fall to the bottom of the pool so that they can be removed later with a cleaner.
Does baking soda kill algae in pools? Only algaecides can "kill" algae in pool water. However, baking soda can help clear up algae. Use both so you can restore sparkly, clean water!
Pool chemical measurements are based on 10,000 gallons of water. If your pool is larger or smaller, you'll need to adjust your math. A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool's pH tested below 7.2, add 3-4 pounds of baking soda.
Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.
Copper Ionization:
This is the best available alternative so far. Copper ionization is an effective option for a chlorine-free pool. There are no residual chemicals which can cause irritation to eyes and skin. It is more cost effective and produces healthy pool water.
The water can sit there until it evaporates, however, a swimming pool will loose it's useful Chlorine in 24 to 48 hours.