You can also use a 50:50 solution of bleach and water to remove any stains. You should always make sure to dry granite composite sinks thoroughly after using them. To prevent any permanent staining, don't leave standing water or dishes in your sink.
Avoid substances like bleach and harsh chemical cleaners as this could damage the surface of your sink and cause staining. Chemicals to avoid include ammonia, sodium hydroxide, hydrochloride and sulphuric acid.
You can usually use mild dish soap and warm water to clean a granite composite sink. For tougher stains, sprinkle baking soda into the sink, add vinegar, and gently scrub with a non-abrasive sponge.
You should always avoid highly harsh chemicals or abrasives such as ammonia and steel wool. Keep in mind that granite composite sinks can be damaged by extreme heat and aluminum cookware. Aluminum cookware can scratch the surface of the stone.
Granite Sinks: What to Know
In addition, it is very important that you never use harsh chemicals such as bleach in an attempt to clean your granite sink. Using harsh cleaning products, including many multipurpose cleaners, can cause damage to natural stone surfaces.
Use soft or micro fibre cloths (eg. E-cloth). A 50% mix of water and white vinegar can be used to remove limescale deposits, ensure to rinse thoroughly after use, do not leave the vinegar in contact with the surface. A nylon scratch pad or toothbrush can be used on difficult areas.
This type of sink is easy to clean
Using a non-abrasive cleaner will keep it clean. Taking care of it properly will preserve its color for many years. Keeping it clean is also important. You can use a magic eraser sponge to remove stains and a 50/50 water-bleach solution for cleaning.
Removing Stains and minor scuff marks
Rinse well. Also, the use of Bar Keepers Friend (directions included on bottle) will help remove stubborn stains. Finally, clean with BLANCOCLEAN to put a protective coating back on the sink's surface.
Stain Resistant: Unlike natural granite, this non-porous material requires no sealing and will keep from staining by design.
Composites are non-porous – This makes them much more sanitary than granite, which can conceal bits of food and bacteria in its crevices. Composites also can withstand disinfectant products without damaging the material, unlike granite.
Yes, composite sinks can withstand boiling water. There is no issue with pouring hot water down a granite, quartz, or solid surface sink.
If you do notice that there are darker stains, or if you have a light-coloured sink that is showing more surface staining, you can clean these with a mixture of 50% bleach and 50% water. Dip a nylon bristled brush into the bleach solution, and use it to scrub the stains. Rinse well with water when you're done.
Hard Water Mineral Deposits (Calcium, Magnesium, Lime)
Unless you wipe your sink dry after every use, water left behind will eventually evaporate. When water evaporates, minerals such as calcium, magnesium, and lime are left behind, bonding to the surface. These spots are called mineral deposits.
Bleach will cause your composite deck to fade and chip. It is incredibly corrosive and will eventually discolour and damage your deck boards. Bleach and industrial cleaners contain harsh chemicals and should be avoided. Instead, use a cleaning product that is made specifically for composite decking.
Heat Resistance
As with all types of sinks, granite composite kitchen sinks are heat resistant. However, they are not heat-proof, and cannot withstand extreme temperatures such as a hot pan taken off the hob and placed directly into the sink. The acrylic resin in the mix of a granite composite sink could warp or melt.
Instead, it is suggested that a simple solution of 50% white vinegar and 50% water is your best bet. Make up the solution into a spray bottle, spray the afflicted area, and with a sponge or brush give it a gentle scrub. Follow this up by rinsing away the vinegar with water and drying off the sink with a towel or cloth.
Some black sinks may show smudges or scratches, but this depends on the sink's material. Black stainless steel is more resistant to smudges, fingerprints, and water spots. Black granite composite sinks are more likely to show hard water spots and limescale deposits.
Quartz tends to be more affordable, and it comes in a vast array of color choices because it's basically a manmade product. Granite composite, on the other hand, although a little pricier, is indestructible as a countertop or sink because a large percent of the product is actual stone from the earth's crust.
For standard cleaning, we recommend using any non-abrasive cleaner, such as Bar Keeper's Friend, Soft Scrub/Soft Scrub with Bleach, or standard liquid dish soap. To eliminate any water spots or soap film buildups, rinse and wipe the sink dry with a clean, soft cloth.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided.
Many people assume that because granite is sealed, it can be maintained with any all-purpose cleaner on the market. But these cleaners often contain harsh chemicals like ammonia that can damage the granite's surface. Although it's heat and scratch-resistant, granite is a sensitive material and requires specific care.
Step 1: Run some warm water through your composite sink. Step 2: Wipe your sink with soapy water. Step 3: Apply baking soda paste to the stains. Step 4: Use a vinegar/water solution to deal with limescale or water stains.
While some types of countertops and sinks are pretty susceptible to stains, granite composite isn't. Because it is non-porous and tightly packed, there isn't much room for stains to seep in. Not to mention, there is usually a good sealer added to the top and polish that can also keep stains away.
Combine two parts of water with one part of vinegar in a spray bottle. Lightly mist the basin. You don't want to wash away the baking soda (you just want to get it damp.) Use the cloth or brush to loosen the grime, soap scum, and stains.