The base cabinet should be wide enough to accommodate the sink, with additional space on either side for plumbing and dish soap. It should also be deep enough to prevent water from spilling out onto the floor. Think about the type of material you want the cabinet to be made of.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
A base cabinet will have drawers at the top. A sink base will have drawer fronts only for decoration, but not functional. Sink base cabinets do not typically have a back panel, shelves, or drawers. A sink base cabinet is specially designed to allow room for plumbing access.
To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet. This requires a full re-design of the cabinet and countertop where your farmhouse sink is installed.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten. If you eliminate the clips, you eliminate the need for access.
If there isn't enough width available in the cabinet, you won't be able to go for the bigger sink, even if there is room on the counter. Also, remember that you are going to have to create a larger hole in the counter to suit the new sink.
TIP: Standard cabinet sizes are in 3” increments. I.E.: 27”, 30”, 33”, 36”, etc. In general your sink should be at least 2-3” smaller than your cabinet size.
However, a standard sink base cabinet can be modified to fit a farmhouse sink. If you are using a standard sink base cabinet, the top half of the cabinet will have to be cut out, and the doors will have to be modified.
The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
Both types of sinks are huge, large, and quite deep. However, the apron sink's front area is exposed and visible- which is why they are called apron sinks. These are versatile and modern houses prefer apron sinks. But on the other side, farmhouse sinks look adjacent as well as covered by the kitchen cabinets.
A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33 x 22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout.
Standard sink base cabinet dimensions range from 30 to 42 inches wide. 30 inches is the standard single basin sink base width. 33 inches is the typical double-basin, offset sink cabinet size. 36 inches is the standard double-basin sink cabinet dimension.
30 inches- Used for single basin sinks. 33 inches- Used for offset sinks, or double basin sinks. 36 inches- Used for double basin sinks. 42 inches- This is the largest width in a base cabinet.
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
Depending on the cabinet, you may have to do a little more work to make room for plumbing. If you're having any trouble at all with plumbing, consult a plumber. And if you want to fully convert your kitchen cabinet into a bathroom vanity, you'll need to trim down the height and depth.
Using base cabinets vs vanity has actually been done many times before, and many people love the results. Kitchen cabinets and bathroom sink cabinets are not mutually exclusive, and can cross over if done correctly.
Another larger option, that provides more variety in its use is a 29" double bowl sink. This sink will fit in your 30" kitchen sink base cabinet and provide you with two 16x13"basins.
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
The attractive and streamlined design of the farmhouse sink can add dollar value to your kitchen and your home overall. If you're thinking of selling your home down the road, the farmhouse sink is many home buyers' dream kitchen statement piece.
Modern farmhouse sinks
Farmhouse sinks have been huge in recent years, and it seems the trend is not going anywhere. A practical choice for family homes, this style of sink is hugely versatile, and is a feature in many modern farmhouse kitchens...and those that have brought the rustic look to the city.
But what actually makes a sink considered “farmhouse” style? The TLDR definition of a farmhouse sink is “a deep sink that has an exposed front-facing side.” Thesaurus may also refer to it as an “apron front” sink – which, in our opinion, is the best description as it literally acts like an apron as you wash.
A 33" sink will undermount into a 33" cabinet if you strap or harness, not clip or block, the sink in place. Disregard the sink manufacturer's instructions please; I've done this hundreds of times.It is not a difficult process at all.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Most Popular By Configuration. Single basin, apron/farmhouse, workstation, and double basin kitchen sinks are the most popular sink styles for the upcoming years.