Too much sealer can lead to premature cracking, which will shorten the lifespan of your driveway. So, should you water down your sealant to thin it out before applying it? After all, some less reputable paving contractors do precisely this to increase their profit margins on certain types of sealcoating jobs.
Sealing concrete yearly can lead to more hairline cracks, so if you have a concrete driveway, you should consider resealing it every five years. In addition, sealing an asphalt driveway too soon may trap oils within the asphalt, resulting in a driveway that is too soft or flexible.
The Drawbacks of Seal Coating
One is that it can be messy and difficult to apply evenly. It's also important to note that sealants will not repair significant damage to your driveway; they will only protect it from further damage. If your driveway is damaged, you'll need to have it repaired before sealcoating it.
Ideally, you should sealcoat once every 2 or 3 years. Make it once every 2 years if your driveway gets a lot of traffic and is constantly exposed to chemicals, snow or oils.
He added that sealing a driveway could yield unwanted consequences: Oil from the bitumen (the black glue that holds the asphalt together) will be tracked into the home, or the sealant could wear away unevenly, making the surface look as if it's peeling.
1. APPLYING TOO MUCH SEALER OR THE WRONG KIND OF SEALER. While slathering seal coat over asphalt in a thick layer can be tempting, a “more is better” approach is detrimental to the pavement beneath. Too much sealer can lead to premature cracking, which will shorten the lifespan of your driveway.
How long do I have to stay off the driveway after it is completed? Upon completion, we recommend to keep vehicles off for a minimum of 48 – 72 hours. You may walk on the driveway after 24 hours.
Sealcoating is not designed to be an asphalt crack filler, it is made for sealing the surface and protecting it from the elements such as UV light, salts and oils. It is not flexible enough to fill a crack without re-cracking and it does not have adhesion quality's that Asphalt Crack Filler has.
While we still recommend those with cracks developing try to get their asphalt seal coated before it gets too cold, spring is really the best time for seal coating. It means your driveways and parking lots look great for the entire year, and warm spring weather is the perfect temperature for a well-set coat.
You can apply sealer at any time of day as long as the pavement temperature does not fall past 40 degrees at night. You can even apply the sealcoat during the nighttime. Many people choose to start their sealcoat project around 10 AM as the sun's temperatures begin to rise, and the humidity is not too oppressive.
It can take at least 24 hours for the driveway sealant to cure completely but if you give it 4 hours to dry it should be able to resist the rain and any possible damage that could occur.
Rain and Sealcoating
Sealcoating application and drying do not pair well with rainy or even misty conditions. Rain prevents the coating from drying. Depending on how heavily the rain falls, it could also wash away the sealcoating from the surface before it has had enough time to dry.
Jetcoat 10-year
10 years, however, is a long, long time and it's how long you'll have in between coats if you get Jetcoat's 10-year sealant. This long-last sealant is designed to last, with a patented formula that'll cover your driveway for 10 years.
Not sealing your driveway leads to bitumen loss which leads to water penetrating down to the base causing it to fail which in turn causes potholes and cracks. Once the cracking and pothole cycle begins it's very difficult or impossible to stop.
In some cases, a residential driveway will only need one coat of sealant. However, if the asphalt sealcoating has never been sealed before, it may take a second coat to give it the rich, deep finish that most homeowners prefer. A second coat may also be indicated if there is some “unraveling” of the asphalt.
When applied under ideal conditions, you can walk on a sealcoated pavement three hours after application. But if you want to drive on it, then you have to wait a minimum of 12 hours for it to dry and cure.
We recommend that you have your asphalt driveway resealed every 2-3 years at maximum. Waiting any longer could result in faster deterioration of your pavement. And doing it too often (i.e. annually) could result in chipping and flaking.
Applying two coats of any sealer will dry and create a better finish much better than one thick coat. These sealers are water based, and they cure and form a film primarily during the evaporation of water from the coating. A thin coat will evaporate much faster and create a single uniform layer.
During initial application, the asphalt should still be at least 220 to 290-degrees Fahrenheit. If the asphalt dips below approximately 185-degrees Fahrenheit before compaction is complete, its consistency stiffens up too much to finish the job properly.
Surface Cracks
They are almost always caused by sealer being applied too thick. Surface cracks will always still be visible after sealcoating.
Filling Cracks
As we noted above, filling in cracks costs between $1 and $3 per linear foot. However, a professional will charge a minimum service fee to diagnose and repair asphalt driveways. And so, you'll pay an average of $100 to $400 for crack repair on your whole driveway, depending on the severity.
Sealcoating will protect against fading, and can even improve the appearance of your asphalt. It will restore the lustrous appearance of the asphalt, even if some natural fading has occurred. It will also fill all of minor surface flaws, giving the pavement a smooth and even appearance.
The first coat of the first time the asphalt is sealed – a squeegee is very effective in getting sealer in all the nooks and crannies of unsealed asphalt – after that coat, sealer ought to be spray applied for maximum coverage and thickness.
Driveway sealer will dry like paint from the top down. It may feel dry on the surface but may still be wet underneath. You can walk on the driveway as soon as it feels dry to the touch, usually just a few hours in sunny areas. Allow additional time for shady areas at all times.