In short, you can't. Sanding the laminate surfaces to “scuff” the finish and provide a surface for the primer to adhere to is a critical step in the process. But first, remove the doors, drawers and hardware. Then, take time to look over the cabinets and repair any spots where the laminate is coming loose.
The laminate refacing process is quite similar to real wood refacing. With laminate refacing, instead of a thin layer of wood veneer, a thin layer of laminate is applied to all the surfaces that you wish to refresh. Then, new doors are installed onto the refaced existing or new cabinets.
Yes, SAND! Laminate is a slick and non-porous surface so it's best to lightly scuff the surface. I use 150-220 grit sandpaper to sand the laminate because it's the BEST way to get the primer and paint to adhere properly.
DO SAND THE CABINETS
Thoroughly scuff the surfaces of the cabinet with 120-grit sandpaper—enough to get a dusting, but not so much that you tear through the paper-thin laminate surface—and clean up any dusty remains with a handheld vacuum and a damp cloth.
A sure way to recognize wood laminate is when the grain does NOT follow through your piece. Wood Veneer is a sheet or thin layer of 'quality-natural-hardwood' that is adhered to a lesser quality wood surface. Wood Veneers give the impression of a more desired quality wood without being as costly.
The least expensive option is painting laminate cabinets. Laminate is not an ideal surface to paint, but it can be done. If you consider the paint job a temporary solution until you can invest in new cabinetry, you'll probably be more satisfied with the results.
The main difference is that veneers comprise thin layers of wood that are pressed on a plywood base while laminates are manufactured by pressing together layers of flat paper and plastic resins under high pressure.
Painting laminate wasn't difficult, but I did find it more time-consuming than painting wood. To sum it up, the most important steps are to sand and prime all the surfaces before painting. If you were to skip those two steps, your paint would have nothing to adhere to and would most likely peel right off.
Can you stain laminate cabinets? You can stain laminate cabinets using tinted polyurethane stain or gel stain. Since laminate isn't real wood, using ordinary liquid wood stains will leave you with a streaky and splotchy surface: that's because they won't get absorbed.
Squirt a small amount of waterproof adhesive between the substrate and the laminate. Push the laminate into the glue, and apply a heavy-duty masking tape to the repair. Wrap this around the door to the opposite side and secure it in place.
Laminate Cabinets
This process leaves a completely smooth surface that does not show any seams. The lack of seams around the door's joints can be a clear indication that your cabinet doors are a laminate material.
Good-quality wood glue and a clamp to hold the laminate against the core is a good way to repair laminate coating that is peeling. Once the glue has set and dried, you can begin to clean the cabinet doors and drawers.
Things You'll Need
One of the advantages of laminate is that it allows for a wide range of different decorating choices. On the downside, it can look warn and dingy over time. You can revitalize laminate cabinets without peeling off the old laminate, as long as they're firmly affixed to the frame and in good shape.
With laminate or wood veneers laid over the existing cabinet boxes, you can change the style, color, wood type—even the associated historical era.
With a hair dryer on the lowest heat setting, blow hot air across the edge of the laminate and continue across the entire cabinet in a sweeping motion. Within seconds, you should be able to get your fingertips under the edge of the laminate and start peeling it away, as Ray Hayden demonstrates.
Can You Sand Veneer? As you might expect, veneered pieces are very delicate and require careful sanding to avoid irreversible damage. If you sand veneer too much, you may render it unusable.
Yes! You can chalk paint over veneer furniture. But you need to make sure to prime. Veneer can be a very smooth surface, so chalk paint alone will probably scratch off.
Yes You Can Paint Laminate! What is laminate, you ask? It can basically be any type of furniture, cabinets, or wood-like product that is made by attaching a thin layer of printed plastic (sometimes called Melamine or Thermofoil) to a substrate of plywood or particle board.
You can paint the cabinets with oil-based paints, acrylic paints, or melamine paints once they have been primed. Moisture-resistant materials in the paint make Melamine paints ideal for painting laminate surfaces, since they are just right for the moisture and steam that are so prevalent in kitchens.
Paint your formica countertops with epoxy-based paint. Due to its dry nature, it is harder to use and more durable than other regular paints, and it will last longer. Epoxy paints are also available in a variety of colors and styles, making them an excellent choice for painting.
Latex paint is recommended for laminate surface painting projects because of its durability and smooth finish.
Immediately scrape away the adhesive with the flat front blade of your 5-in-1 putty knife. Wipe the knife clean with a rag soaked in denatured alcohol. Continue the process until all of the adhesive is removed from the back of the laminate. Heat and scrape away the adhesive residue from the surface of the wood backing.
Can you paint veneer cabinets? You sure can! The key, like for any painted project, is in the prep and choice of primer and paint. Proper cleaning to remove all the grime and dust, sanding the right amount, and using the right adhesion-promoting primer can make a huge difference in the durability of the finish.
Melamine is cheaper than laminate as it is manufactured by a method which is not cost intensive. Laminate is more durable than melamine and more resistant to heat and chemicals. Melamine is produced with a pressure of just 300-500psi while to make a laminate a pressure of 1400psi is required.