Yes, the original key is necessary to use a rekey kit when rekeying a lock. If you do not have the original key, you can choose to hire a locksmith to make a new key or you can replace the lock.
Do you have too many keys to get into your house? For $10.00 each, our qualified staff will rekey your Schlage, Kwikset, or Ace brand doorknob or deadbolt. If you have a newer Kwikset lock it may use SmartKey technology, which makes re-keying quick and easy. We'll gladly show you how to rekey those locks for free!
Contact a locksmith. If you have lost your only set of house keys, key replacement is your only option. You will need to get in touch with a reputable and experienced local locksmith who will be able to make you a new key. A skilled locksmith will create a key to lock by hand, without needing the original key.
You can re-key a lock like a pro at a fraction of the cost. Re-keying kits are available for most lock brands but they're not interchangeable. You must buy a kit for each brand of lock in your home. (If you're lucky, they'll all be the same brand!)
Many people do not know that a locksmith can make a key from a lock even if the original key is lost. A key can be copied from a lock in one of three ways: Using an impression device. Code cutting.
Rekeying a lock is a common task for a locksmith, and this simple project only takes about 30 minutes to complete. The only tools you'll need to rekey your lock yourself are a rekey kit and the current key to the lock. This saves considerable money, especially when you need to access multiple locks with the same key.
Locksmiths typically charge $50–$75 per hour, or they charge per lock with a flat fee for the visit. A locksmithing job may cost as little as $50 or as much as $400 depending on the following factors. Emergencies: You'll pay extra for service at night or on weekends.
We rekey Kwikset and Schlage locks at a fraction of the price of having to replace your locksets. We can also create a 'master key' for superintendents or landlords that need access to multiple units without carrying a hundred keys. We also key Masterlock padlocks to an existing Masterlock key.
Yes, it is possible for you to rekey a lock without the original key. A locksmith can change your locks even if you have lost or misplaced the original key. In general, it is possible to pick or shim the lock and unlock the door. Then, the locksmith will have a much easier time removing the lock cylinder.
Rekeying is usually cheaper, and it still provides you with a renewed sense of security. If you move into a new home or if your key is lost or stolen, rekeying your lock will almost always suffice. If your lock mechanism is beginning to deteriorate, however, consider changing the lock.
Bump keys are keys cut to a special design that will allow them to be used for picking pin-tumbler locks. Pin-tumbler locks are the world's most popular lock, and these include exterior door entry locks for homes. The process of gaining entry using a bump key is called “bumping,” and it can be very effective.
Key Extraction
You'll need a locksmith to extract the key so you don't damage the lock and have to replace it, too. A key extraction can cost between $50 and $200. If you have a spare key, you won't have to rekey the lock; you can just duplicate the spare.
In general, prices average between $20 and $50 for a single lock and can cost up to $130 for a house. However, if you call a locksmith out on an emergency you can expect it to cost an extra $100 to $150. If you need to rekey your vehicle the price ranges from $75 to $180 for most locksmith companies.
When purchasing more than one lock, look for packages that have the same “key alike” number on the package. Alternatively, our store associates can key all of your locks to work with the same key. You can also purchase a rekeying kit to swap out pins and springs yourself.
Rekeying a lock generally takes about 15 minutes, but this depends on the type of lock as well as the skills of the person working on it. The most time-consuming part of the process is removing the lock from the door – the actual rekeying is much simpler. If it's simple, should you rekey your lock yourself?
It's possible to have a duplicate key made without the original. If you don't have the original key or it has been too worn down over time, you'll need to see a professional locksmith who can use a code cutter to identify the groove depths of your lock's key code.
Although there are many different types of locks, today we're going to talk about rekeying a pin and tumbler lock. This is the most common and one of the easiest types of locks to rekey aside from old-school locks.
Keyed alike is the term used to describe multiple locks having the same cut so that one key can fit all the locks. Having your locks keyed alike is the most convenient way to handle and manage all your keys.
Re-keying a new lock to match an existing Kwikset key is simple and easy. And all Kwikset pin & tumbler locks can be re-keyed to achieve convenient one-key operation across multiple locks. All you need is a Kwikset Re-keying Kit, a Kwikset key, and a pin & tumbler lock.
Pick the key you like the best (or have the most of) and have all the other knobs keyed to it. Remove the locks that need to be rekeyed and take them to a locksmith or a hardware store. Bring a key that works each of the locks and the key you want all the locks keyed to and give us five minutes a lock.
The magnet doesn't make the lock move: Every lock will work differently, but it's typically friction that causes this problem. If a piece of your lock is supposed to move, be sure it can move easily. If it's attached too tightly, your magnet may not be able to move it.
Deadbolts, however, are still vulnerable to lock picking. Pin and tumbler locks are the most common designs in use today. These locks use a series of small, spring-loaded pins to keep the cylinder from turning. When there is no key in the lock, the position of the pins blocks the motion of the cylinder.
CR's take: The Medeco Maxum 11TR503-19 is the strongest deadbolt across all of our lock categories. It's top-notch for drilling, withstands kick-ins very well, and is designed in a way that makes it quite difficult to pick.