Dishwashers can be located away from the sink cabinet, but generally they need to be within a few feet so the sink plumbing can be used for the water supply and drain.
Standard dishwashers come with a 6 1/2-foot supply line and drain hose, which will both need to be connected to your water mains supply, which is usually found under the sink. However, if you do wish for your dishwasher to be further from your sink, you can use a hose extension to give yourself more room.
Can you install a dishwasher anywhere? Within reason, yes. Freestanding models can be installed wherever there's access to a water and drain connection. Integrated models need to be installed in a kitchen cabinet with similar access to a water and drain connection.
All dishwashers require a licensed plumber to install the plumbing and an electrician for the power outlet.
Replacing an existing dishwasher is a relatively easy job (provided you've measured up correctly and your new dishwasher fits in the space under your bench). All the infrastructure you need – power, water, drainage and space – are already in place.
Since 15A outlets have been the standard for so long, almost all small home appliances are designed to work with a 15A outlet. Some high-end dishwashers do require a 20A circuit, but most mainstream units are still 15A.
The project doesn't require any advanced plumbing or electrical skills. Installing a dishwasher successfully does require the proper know-how and equipment, including a dishwasher installation kit that has a 90-degree fitting and water supply line. This guide outlines how to install a dishwasher.
Dishwashers should be placed next to the kitchen sink – either on the right or left-hand side – as well as being close to storage units. It is also important to ensure that your dishwasher placement allows freedom of movement.
If you have the space beside your existing cabinets to place a dishwasher comfortably, then there is nothing stopping you from doing that. All you really need is access to a water line and drain as well as an electrical connection (or the ability to install an electrical connection).
Dishwasher to sink distance: From the dishwasher to the sink, the distance should be no more than 36 inches.
The task may seem daunting if you've never seen a dishwasher that wasn't installed under a cabinet, but moving a dishwasher isn't complicated. Although there is minor plumbing and electrical work necessary to unhook the dishwasher, they are simple procedures suitable for novices and require only basic tools.
In terms of convenience and efficiency, this would mean that the dishwasher should be located on the left for a right-handed person. If you are left-handed, the dishwasher should be placed on the right.
No! You don't need to add an extra trap. In a dishwasher, water drains from the bottom and flows directly into the garbage disposer or septic line.
Dishwashers need to have at least 2 feet of space between them and the wall. This is due to how hot the machine can get while it is running and the moisture it emits. Having a dishwasher too close to the wall will quickly result in mold and mildew building up on the sheetrock or paneling.
The dishwasher must be installed so that drain hose is no more than 10 feet in length for proper drainage. The dishwasher must be fully enclosed on the top, sides and back, and must not support any part of the enclosure. Follow local codes and ordinances. Do not connect Do not exceed 10 feet distance to drain.
The dishwasher should never be placed right next to a wall oven that has been installed beneath the counter. You need to ensure there is at least 24 inches of clearance between these appliances. When in doubt about the 2-inch clearance, leave a clearance of 24 inches between these appliances to be safe.
Unlike plug-in appliances, a dishwasher must be hardwired and hooked up to the home's plumbing. If you're for the challenge of installing it yourself, you can save a lot of money.
Dishwasher – A large range of dishwashers use the standard current of 110 volts. It is best to use an outlet that has a Ground Fault Interrupter or GFI. This will provide an extra precaution if the outlet gets wet. A GFI is designed to trip or disconnect power to prevent electrocution.
Dishwashers are hardwired. They consume a relatively high amount of power, so it is not advised to use the same method to connect your other household appliances.
Dishwasher Circuit
When installing a dishwasher, the circuit should be a dedicated 120/125-volt, 15-amp circuit. This 15-amp circuit is fed with a 14/2 NM wire with a ground. You may also elect to feed the dishwasher with a 20-amp circuit using 12/2 NM wire with a ground.
A hardwired dishwasher is one that's connected directly to your household power supply without a plug. As a result, the appliance does not receive its power through a wall socket or any other electrical receptacle.