Set it upright in its final location and allow the freezer to sit for the same amount of time that it was on its side (24 hours maximum). Do not plug the unit into the electrical receptacle without allowing this settling time. The appliance can be damaged if it is plugged in prematurely.
Generally, if you're going to be 100 percent sure that the oil has settled back down into the compressor, you should leave it for 24 hours. However, when having it delivered, the company you bought the appliance from may recommend leaving it only for eight hours before turning it on.
You should leave your fridge/fridge freezer to settle for at least 4 hours. Once 4 hours have passed, you can plug your appliance in. When doing so, make sure that the thermostat control is set to on. Before placing food into the appliance, allow your fridge some time to cool down to temperatures safe for food storage.
I have just had my fridge/freezer delivered how long do I need to leave it before using? Once the unit is in the house you should: Leave the appliance to sit for 3 hours. Then plug it in and switch it on.
It's best to wait at least 4-6 hours for the oil in the compressor to settle after transport. However, for your peace of mind, it's a good idea to let it sit for 24 hours to be on the safe side.
Set it upright in its final location and allow the freezer to sit for the same amount of time that it was on its side (24 hours maximum). Do not plug the unit into the electrical receptacle without allowing this settling time. The appliance can be damaged if it is plugged in prematurely.
Fridges and freezers are full of fluid that's used to cool the compartments. In transit, your appliance gets shaken around, so it's best to let everything settle and consider the duration needed to 'let it stand' before you plug it in.
Plugging in and turning on the fridge immediately can cause the compressor to run dry, leading to damage.
Let it stand
In transit, your appliance gets shaken around, so it's best to let everything settle before you plug it in. If it was transported upright, give it at least an hour before you plug it in. If it was transported on its side, turn it the right way up and leave it for at least four hours.
After the Move
After you have moved the refrigerator to its new location, let it stand upright for 24 hours before plugging it in to allow all the fluids to settle. While you are waiting, place the shelves and drawers back in their original positions.
However, some brand new appliances need as little as eight hours before being ready to use. It's up to you how cautious you'd like to be, but the hazard is that if you don't wait a sufficient time, you will damage the cooling capacity of your fridge freezer, which you can't easily repair.
If you're moving a fridge or freezer into your new home, it's best to turn it off 24 hours before. This gives the fridge's evaporator time to defrost, which reduces the risk of any damage during the move. It also lets the oils and fluids inside settle and stops them moving through the compressor.
Upon initial installation or when the settings on the temperature controls are changed, it usually takes 24 hours for an upright or chest freezer to reach the proper temperature.
If you plug it in straight away it is possible that damage may occur to your new appliance. The refrigerant used to make the appliance work has to settle before you can plug it in. Please wait 2 hours before you plug it in. If you plug it in straight away it is possible that damage may occur to your new appliance.
Ideally, you should keep your freezer entirely upright the entire time during the move. If you do not have space to transport the freezer upright, place it on the compressor side.
Typically, a deep freezer should be plugged in and allowed to run for at least 4 hours before placing any food inside. This allows the appliance to reach the optimal freezing temperature.
"After transporting: If it has been necessary to transport the refrigerator on its side (ex. Top Freezer and SxS models), it should stand upright for an equal amount of time as it was on its side before plugging it in. If it was on its side for more than a day, leave standing for 24 hours before running.
When can I put food in my new fridge freezer? You can put food in your new fridge freezer after letting it settle for 4 hours if it was transported on its side or 1 hour if it was transported upright. After this amount of time you're absolutely fine and safe to put your food in your new fridge freezer.
Unless you left it all the way open the worst that will usually happen is it can ice up in which you might need to defrost it. If the food was/is still frozen it should be fine.
Is it safe to unplug the refrigerator? The answer is no. The temperature of a refrigerator needs to be maintained at a certain level, and if you unplug it, the temperature inside drastically changes leading to many problems.
I always advise people to leave it for 4 hours even if its moved stood up as that's what the manufacturers of modern fridges recommend to let it settle. I've seen some manufacturers say two hours if moved stood up, 4 if moved on it's side. 4 hours is a good number.
That shouldn't be a problem as long as it wasn't lying flat or upside down. Just plug it in and give it time to get down to temperature. If it doesn't, then return it.
Power Outages: During and After
The refrigerator will keep food cold for about 4 hours if it is unopened. A full freezer will keep the temperature for approximately 48 hours (24 hours if it is half full) if the door remains closed.
Fridge freezers repair and gas refilling on-site ,R400 for gas refill. 0646213749 call or WhatsApp Lesley for assistance.
The weight of the ice in your freezer might make it heavier to move. Additionally, it will begin to spontaneously defrost when it is unplugged, which might cause a mess of drips. You should thaw it before travelling to avoid these situations.