If you are trying to decorate your home in a manner that appears clean, spacious and uniform, you should have the same carpet throughout your house. It's convenient and quite affordable without requiring special treatment when cleaning.
Once you find the right neutral carpet that will go with everything, you can then vary and change the wall colours in each room. Personal choice though and depends on the layout of the house.... I'd pick one colour throughout, it could be more economical, and I think it gives a feeling of space to the house.
The best transition strip between different types of carpets is a threshold made of wood or stone. Install a strip the width of the door or wall opening to bridge the two styles of carpet. The result is a defined edge that adds a polished look to your space.
The rule of thumb is this: All of the large area rugs you can see from a single spot in your home should complement each other. Let's say that from your living room you can see the hallway and the dining room. According to the rule above, the rugs in these three areas should complement each other.
One Room or the Whole House
The Home Depot's qualified carpet installers can perform whole house installation services or lay high-quality, new carpet in just a room or two.
Your wall color should be two tones lighter than your carpet. If you have dark walls, you can also go a few tones lighter with your carpet. Since it's much easier to change your wall color than your carpet, choose your carpet color first and then match your wall color.
Why Do I Need to Use Transition Strips? Transition strips serve two main purposes in a residential or commercial space. First, they're put in place to make navigating from room to room easier. They also provide a visual break between rooms and flooring materials that might otherwise be jarring and less than attractive.
The cheapest and easiest method is to install transition pieces or thresholds between the areas of different heights. These transitions are available in different matching shapes and heights for most laminates. Common use is to join carpeted, tiled or other floors, to new flooring height.
Using the same flooring in every room of the home creates a look with clean lines. However, there's no rule that says you can't use different flooring. The only real problem with two different floorings is if you use two that are almost, but not quite the same. It will have a jarring effect.
A neutral-colored carpet, such as tan, brown or gray, is a safe option since it will work with virtually any wall or decor colors. But it's usually best to avoid carpets that are extremely light like white or beige because they don't hide dirt as easily as darker carpeting.
Greige Goods
Greige good is the term used to refer to synthetic carpet fiber that has been manufactured, but that has not yet been dyed.
Dark brown is one of the best carpet colors for hiding dirt. The darker the shade, the better the dirt will blend into the carpet. Powder and dust won't show up against the dark brown color. While a lighter brown can also be an attractive option, it won't hide as much dirt.
Going with a contrasting patterned carpet on a stair is kind of a less expensive way to achieve the "wood stair with a runner" look.
Stairs should have carpets to reduce the risk of falls. While carpeting won't prevent falls, it can give people and pets more traction when going up and down. Carpet also provides more cushion than wood, so it can be safer if someone does fall. However, wood stairs are easier to clean.
When you install laminate flooring you must leave a 3/8-inch space on both sides of the transition molding. This space allotment is referred to as an expansion gap. An expansion gap is necessary to provide "breathing room" for laminate to expand or contract when the weather is cold or warm.
Transitioning to a Different Laminate Floor
You simply change the boards in the middle of the doorway and continue the installation in the other room with the new flooring. The transition line looks best when it's under the closed door or lined up with the front edge.
You should not change the direction of hardwood flooring between rooms—the reason why is that it causes visual disharmony. Placing hardwood flooring in the same direction that follows your space is best.
Lay the rugs one on top of the other, with the right sides facing in. Make sure the cut edges are lined up and sew the two rugs together using a straight stitch. Then open the rugs, now sewn together, so the back side is facing up. Spread the seam open and sew a wide zigzag stitch over the seam to help it lay flat.
Things You'll Need
If you're installing carpet in your home and don't have a carpet seam iron, you can use a regular clothing iron in a pinch. It's shaped a little differently and isn't as heavy, but it will melt the seam glue at its highest heat setting.
To do this, remove the old seaming tape and then put the new tape underneath both pieces of carpet. Use a seaming iron to press the seams together onto the tape so that both pieces of carpet firmly adhere to the seam tape. Weigh down that section with weights or something heavy and allow it to dry and cool.
Which color carpet best accents gray walls? While it's ultimately your decision, the following hues are generally the most agreeable carpet colors for gray walls: Beige.
While some designers are currently deploying cool-tone carpets instead of beige carpets, beige is not out of style. The trend at present is to use white or grey. Additionally, hardwood floors and faux wood floors have taken some popularity from carpets.
When it comes to carpet, neutral colors like beige, tan, and gray are by far the most popular.