Yes, you can use just one curtain panel. This is sometimes called single panel curtains. Individual panel curtains work exceptionally well for sliding doors or smaller windows. Most people consider two curtain panels to have a "fuller" or a more finished look, but using a single panel gives a room a unique feel.
For smaller windows where a double curtain will just be too much, a single curtain panel is a much more elegant choice. They can be hung with the tie on the right, or the left, of the window.
As a general rule of thumb, curtains that are attractively full and drape gracefully around the window require two to two-and-a-half times as much fabric as the width of the window itself.
Most of the time, curtains come in pairs. For covering windows, however, single panel drapes have a variety of uses. Several single panels can be combined to curtain an extra-wide window economically. Small windows may need only a single panel, tied back for increased light, then hung straight for privacy.
Single Panel Curtain:As the name states, single panel curtains are made of one piece of fabric. These are great for sliding glass doors. Shop Single Panel Curtains and Drapes. Panel Pair: These curtains come in matching pairs, allowing you to hang the two pieces of fabric on either side of the window.
It means there's only one side! Like you see in the picture it showed two curtains 1 panel means you only get one side. So if you're looking to part them in the middle like in the picture you'll need to buy more then one panel. Amazon Customer.
Curtain panels that are sold in individual packs are more affordable for the bottom line because people can buy the exact number of panels they need to decorate their windows. There are no extra costs to eat because you pay for what you need and that's that.
Determine the number of panels you need to order: ~ Multiply window width by 1.5 to 2 if you want curtains loosely gathered for a relaxed, tailored look. Divide your total by the width of a single curtain panel to get the number of panels you need.
It depends on factors such as window length, but more often than not, curtains look best when touching the floor. However, how low you want your curtains to hang will determine what you want to achieve. In reality, different decorating styles employ varying curtain lengths.
Your best move is to hang curtains within 8 inches of the top of the window frame. For very tall windows, which are popular in many modern homes, that means placing the rod as close to the ceiling as possible—in fact, you might want to install rods designed to actually hang from the ceiling.
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window's inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window's frame.
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.
The sizes are listed width by width. The curtain panel is 54 inches wide by 84 inches long. Before choosing curtains, it is advisable to install a curtain rod.
Curtain panels or drapery panels are both stationary side panels that frame a door or window. Commonly used to frame blinds, shutters or shades in the window, or on either side of a doorway between rooms. This window treatment can make a design statement in the room.
Double panel curtains are the most common style, and consist of two hanging curtain panels. This style works well for large windows (think: bay windows, picture windows, and arched windows) or even as a way to filter light around a set of glass doors.
They usually do not. The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
Short Curtains
Visually speaking, high-water style is not the most appealing way to hang curtains. The shorter length can appear dated. Also, it can cut the visual height of your room in half. From a purely practical standpoint, however, short curtains are sometimes the best option.
You should aim for your curtain hem to be about 3/8" to 1/2" above the floor. Not only is this an easier length to measure for, but it also makes it simple to vacuum and sweep. It's a great option if you plan to open and close your curtains a lot since you won't need to rearrange them each time.
Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.