Most cabinet types, including metal, plastic laminate, painted wood, and vinyl cabinets, can be cleaned with a solution of liquid dish soap and warm water. This simple and mild solution is enough to get food smudges, dust, and mild grease build-up off of your cabinets.
Water (with a pH of 7) and dish soap (with a pH between 7 and 8) are always good options. The best cleaner, the one that is less likely to do damage to the wood is good old-fashioned elbow grease. Applied with a damp cloth, elbow grease should be effective at removing dirt and dust and even oil and grease build-up.
Vinegar is the go-to natural cleaner when faced greasy cabinets. Mix a 50/50 solution of vinegar and warm water and pour it into a spray bottle. Mist on cabinets, let sit for a minute or two and then wipe clean with a soft cloth.
Dawn dish soap is famous for being an excellent degreaser, and this simple tip might be the best way to clean wooden cabinets. It is also mild enough that it won't ruin your wood cabinets or their finish. You can even use dish detergent as the best way to clean painted kitchen cabinets, too.
Once you've cleaned your cabinets, go over them once more with a clean cloth lightly dampened with warm water. This removes any lingering cleaning solution or grime.
After wetting your brush with warm water, add a little baking soda, then scrub away on the cabinets. Follow with a damp, warm cloth to remove the residue. Not only will the baking soda cut through the grease, but it's also non-abrasive, so it won't harm your wooden cabinets.
Use 50% water and 50% distilled vinegar for a streak-free look. If your kitchen glass cabinet has wooden mullions, then do not spray the distilled vinegar directly on the surface. Instead, spray onto a cloth and gently wipe.
Mix up a few drops of dish soap (not dishwasher detergent) in a bowl of warm water until soapy. Use a sponge dipped in the solution, but not dripping wet, to gently work the grease and grime out. Follow up with clean water to remove lingering dish soap. Dry the surface thoroughly with a dry microfiber rag.
Mix a cup of white vinegar with a cup of water. This mild cleaning solution is perfect for everyday use on wooden cabinets. It won't warp the wood or take off the finish. If you dislike cleaning with vinegar, you can use a light soap solution instead.
Mix 1 cup of water, 1 teaspoon of white toothpaste, and 2 tablespoons of baking soda. Use your finger or a spoon to mix it well. Dip a sponge in the mixture and scrub down your cabinets. Rinse with a damp cloth until all residue is gone.
Deep cleaning:
Place about 1/2 teaspoon of dish soap or oil soap wood cleaner on the scouring sponge. Wet the sponge slightly and gently scrub the cabinet allowing it to form a lather. Wipe with a slightly wet cloth with fresh water in it. Then dry it with a microfiber cloth.
Wipe down the inside of cupboards and drawers with warm, soapy water or white vinegar diluted with warm water – about one part vinegar to two parts warm water. Rinse and dry.
Murphy® Oil Soap gets deep into grime to break up dirt particles and it's safe to use on wood products like cabinets.
These versatile cleaners are made from natural vegetable oils, and are safe to use on any kind of wood—including flooring, chairs and cabinets. Dilute a gallon of warm water with this soap, and use a soft rag dipped in the solution to wipe down your cabinets.
The sticky residue found on your kitchen cupboards is usually caused by cooking grease and dirt, but it may also be the residues left by some cleaners. No matter what its source, a sticky residue is unappealing and damaging to your kitchen cabinets.
Saturate a small cloth with the FEED-N-WAX Wood Polish and Conditioner and wipe evenly all over the wood surface. Let wax stand for at least 20 minutes and then wipe off all the excess. There you go, just like brand new!
The best way to clean them is to use the mildest solution first. Wash the cabinets with a microfiber cloth dipped in a mild solution of a vegetable-oil soap and warm water. Wipe going in the direction of the grain, then wipe with a clean cloth with water only and dry.
Create a cleaning solution with 1-part baking soda, 2 parts warm water and the lemon juice. Add the solution to a spray bottle and spray the liquid onto the kitchen cabinets. Leave for 2-3 minutes, allowing the baking soda to work its magic. Use the soft sponge to gently scrub the grease away.
Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dampen a sponge in the mixture, wring out so it's just damp to wipe away grease, grime and dirt. Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth. Finish by rinsing with water and wipe kitchen cabinets dry.
For removing very stubborn stains caused by grease and grime, use a small amount of rubbing alcohol and a clean, dry cloth and rub the polyurethane surface thoroughly. Removing Stains. – To rid your polyurethane countertop of stains, rub the surface using a microfiber sponge.
What It Is. Despite the name, the common form of sugar soap contains no sugar. The name comes from the way it looks: The powdered form resembles sugar crystals. Although ingredients vary from brand to brand, the main ones are sodium carbonate, sodium phosphate and sodium silicate.
Just mix 3 tablespoons of baking soda with 1 cup of water. Use the solution on a sponge to scrub away light grease stains from hard surfaces, like countertops, linoleum, the stovetop and even pots and pans.
Simply grab a microfiber cloth and make a solution of warm water and liquid dish soap, and wipe the cabinets down. The interior of your kitchen cabinets should only really be cleaned once every 2-3 months.