There are a few ways to restore your porcelain tile after you've come across a stain. You can try tackling the spot with some hydrogen peroxide or by using a steam cleaner. For more difficult stains, consider trying diluted muriatic acid, an industrial-strength solution professionals have been using for decades.
Porcelain is a highly durable material for dental restorations, but it is not entirely indestructible. Stains will not penetrate the surface of quality porcelain restorations unless the porcelain has been damaged by: Highly abrasive toothpastes that wear away the outer glaze of the porcelain.
Put a cup of hydrogen peroxide in a spray bottle. Spray evenly over the porcelain. Let the hydrogen peroxide sit for 15 minutes to an hour. Rinse and buff with a microfiber cloth for a clean, bright shine.
The bathroom sink, especially a porcelain one, can tend to get quite nasty over time. You see a lot of discoloration around the drain and the overflow hole. Just apply the concentrate solution to both areas, let it sit for a few minutes, then scrub it with a cleaning toothbrush.
A baking soda and vinegar solution is perfect for cleaning a porcelain sink and removing stains. Make a paste out of the two ingredients and use a soft-bristled brush (such as an old toothbrush) or cloth and your finger, to apply and scrub the stained area.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach—such as hydrogen peroxide—is a good alternative.
You can safely use vinegar to clean ceramic or porcelain tiles, whether they are glazed or unglazed.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach (such as hydrogen peroxide) is a good alternative.
For cleaning and sanitizing, the CDC recommends a dilution of one cup of bleach to five gallons of water. Diluting bleach decreases the alkalinity and is safe for regular use on all types of porcelain and ceramic tile surfaces.
It can be annoying to discover stains on your glazed porcelain tiles. However, they are easy to remove with the right utensils and solutions. You can use a commercial product safe for glazed porcelain tiles or use white vinegar. Use a warm-water wash with vinegar at half strength to remove the stain completely.
Mix one cup of lemon juice and a half cup of water in a spray bottle. Spray the inside of the toilet bowl, including beneath the seat lip. Let the lemon juice work its magic for 20 minutes. Use your toilet scrubber to scrub the stains.
Step 1: Wet your microfiber cloth or sponge with hot water and a few squirts of dish soap. Step 2: Wipe down the sink and apply a lil' elbow grease to any spots that are extra dirty. Step 3: Rinse away the soap and grime, et voila! Your sink is sparkling clean and ready to be used again.
The brown stain is from a large amount of iron in your water.
Although porcelain crowns are stain-resistant, dark coloured liquids such as coffee can stain them over time.
While porcelain is a highly durable material for dental restorations, it's not entirely indestructible. Many porcelain crowns become stained when the protective glaze that helps the restoration retain its color gets damaged or if the margin of the porcelain becomes exposed in the mouth.
Many homeowners ask if Magic Erasers® can be used on porcelain or if they will damage ceramic tile. The good news is that they can be safely used on ceramic tiles and porcelain, so you have nothing to worry about if you plan on using them this way.
Baking soda creates a soft scrub that can tackle minor stains in a sink without marring the porcelain.
For most types of tile, including porcelain and ceramic, you only need one key ingredient: A DIY mixture of warm water and dish soap will do the trick. Follow these steps to clean tiles: Spray the water and dish soap solution on the tile surface. Wipe the area with a damp microfiber towel or cloth.
Do not use cleaning products that contain acids or ammonia (and other harsh chemicals) as these can damage grout and glazed surfaces of the tile. Choose products that are compatible with your grout to avoid damage or discoloration of the grout. Always dry your porcelain thoroughly after cleaning.
Avoid tooth-whitening toothpastes with bleach and harsh abrasives such as baking soda. These will work on your natural teeth only, whitening them in ways that may not match with your porcelain veneers. This will particularly be noticeable if you only have veneers on your front teeth and not those on either side.
There are a number of cleaning solutions that can be used on tile floors, from diluted dish soap to commercial tile and grout cleaners. Perry recommends rubbing alcohol for cleaning dirty grout and tiles.
A quick once-over with a cloth sprayed with WD-40 is great for removing soap scum from shower doors and can also prevent mildew from returning. It's also a great way to clean the grout between your bathroom tiles, remove stubborn stains from your toilet bowl, and rust stains on porcelain caused from aerosol cans.