Can I wash walls with Pine-Sol?

Author: Vincenzo Rippin  |  Last update: Saturday, August 30, 2025

Step 1 Add about ⅛ cup of your favorite Pine-Sol® scent to a gallon of water. Step 2 Dip a sponge, rag or cloth in the mixture and wring out until it's lightly damp. Then, start wiping down the walls from top to bottom, using Pine-Sol® at its full strength on stubborn marks. Step 3 Wipe down the walls with water.

Can I use Pine-Sol on painted walls?

Pine-Sol mixed with water should work fine for most walls, especially if you're dealing with light dirt or stains. Just make sure to test a small area first to ensure it doesn't affect the paint or finish. Other great options are warm water with a bit of dish soap or using a Magic Eraser for tougher spots.

What is the best thing to wash walls with?

The best solution for cleaning walls is mild soap and warm water, as the soap will work hard to remove grime without harming the painted surfaces.

Can you use Pine-Sol on shower walls?

Use Pine-Sol® on shower tiles, walls, fixtures, and even plastic shower curtains.

What should you not use Pine-Sol on?

Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood. Q: Where should I NOT use Pine-Sol® Cleaners? A: We do not recommend using Pine-Sol® Original Multi-Surface Cleaner on aluminum, copper or marble surfaces.

How to Clean Walls with Pine-Sol

Does Pine-Sol remove mold?

Pine-Sol can be effective against some mold, in some circumstances, but it is not universally effective against all mold. Why is Pine-Sol effective against some mold? Because it has an extremely acidic and extremely basic pH. pH is mainly what determines whether a cleaning chemical is considered “strong” or not.

What is the best thing to clean wet walls with?

Wetwall panels can be cleaned using normal soap, water and a soft cloth. Alternatively a non-scratch liquid cleaner can be used such as ShowerWall SuperClean. On a day to day basis or after every use it's best to rinse the panels and then clean off the excess water with the squeegee or a soft cloth.

Can I use Pine O clean on walls?

It can be used on surfaces including floors, walls, counter tops, and tables. It has 1.5% benzalkonium chloride. Do not mix with other solutions. Avoid contact with eyes and mouth and keep out of reach of children.

Does Pine-Sol leave a residue?

After cleaning with diluted Pine-Sol, make sure you rinse thoroughly. Using a damp mop with plain water after cleaning can help ensure no residue is left behind.

Can you wash walls with Dawn dish soap?

Professional painters often prefer a simple mixture of mild detergent and warm water, and it works wonders for most walls. A solution of warm water and mild dish soap can erase stubborn greasy spots on your kitchen walls.

How often should you wash interior walls?

A dirty wall takes away from the beauty of your home. Plus, messy homes often lead to illness. So when should we clean the walls? Design experts say you should clean the walls at least once a year.

Can I use fabuloso on walls?

Fabuloso® Antibacterial is an all in one cleaner that can be used for floors, walls, bathrooms, living rooms, and almost every hard surface.

Is Pine-Sol disinfecting?

The Original Pine formula disinfects both full-strength and diluted and kills 99.9% of germs, including cold and flu viruses, the virus that causes COVID-19, RSV, Norovirus and more.

What cleaning solution is best for walls?

The best way to clean your walls is to use a mixture of white vinegar (1/2 cup) and warm water (2 cups), and you can add a few drops of liquid dish soap for a deeper clean if your walls are very dirty or stained. For wood walls, add 2 tablespoons of lemon oil or an oil soap to the mix.

What not to use on painted walls?

Avoid using harsh chemicals or abrasive cleaners, especially on delicate finishes like flat paint or oil-based painted walls.

Can I wash my walls with Pine-Sol?

Step 1 Add about ⅛ cup of your favorite Pine-Sol® scent to a gallon of water. Step 2 Dip a sponge, rag or cloth in the mixture and wring out until it's lightly damp. Then, start wiping down the walls from top to bottom, using Pine-Sol® at its full strength on stubborn marks. Step 3 Wipe down the walls with water.

What should you not clean walls with?

Flat, eggshell or stain finishes is less durable and more likely to rub off. Try not to scrub too hard or wash with too abrasive a cleaner. Avoid harsh chemicals and use a mix of mild detergent and water. Semigloss or glossy finishes, popular on kitchen walls are durable enough to stand up to degreasing cleaners.

What is the best thing to clean internal walls with?

For general dirt and grime, dishwashing soap is a simple and effective solution. Mix a small amount of dishwashing soap with warm water in your bucket then dip a soft cloth or sponge into the soapy water and wring out the excess liquid.

What is the most effective way to clean walls?

A soft sponge and an eco-friendly cleaning solution of water, dish soap, and distilled white vinegar is all you need. Dip a clean sponge in your wall cleaner, wring it dry, and gently clean your wall. The vinegar odor will disappear after the wall dries, but you can wipe the wall with a damp cloth to speed things up.

How do I get moisture out of my walls?

Once you've addressed the cause of the problem, you can start to dry out the wall. This can be achieved through the use of fans, dehumidifiers and even just sunlight. You can accelerate this process by ensuring that you remove all wall coverings and increase ventilation to the space.

How to best clean shower walls?

How to Clean Your Shower Walls
  1. Scrub all surfaces with a sponge dipped in vinegar.
  2. Scrub mold and mildew with a diluted bleach solution.
  3. Rinse well with fresh water.
  4. Remove stubborn stains with a stiff brush and baking soda.

Do you have to rinse after using Pine-Sol?

If you use Pine Sol or Mr. Clean, you don't have to rinse. But you may want to take old towels, put one under each one of your feet and “dry” the floor with them afterwards. You'll be stunned how much dirt still comes up after you've wet mopped.

Can I clean my shower with Pine-Sol?

Pine-Sol can help you with shower cleaning, walls, and more. Step 1 Clear shampoo, soap and other items from your shower so you can hit all the corners before you clean. Step 2 Mix ⅛ cup of Pine-Sol® in 1 gallon of warm water. Step 3 Wipe down your shower walls with the mixture.

What 100% kills mold?

For large amounts of mold, the only method that kills mold 100%, every time, is removing all of the mold-infested materials entirely, and replacing them with new materials.

Previous article
Does bamboo charcoal really filter water?
Next article
Can I put vinegar in my Bosch washing machine?