While it's a great tool for getting gunk and rust debris off a metal part, it needs wiped off after, as if left on it will eventually encourage rust and corrosion. So, no WD40. Standard oils and grease are also not the best options.
Lithium grease is the preferred, but silicone is also ok. Lithium is very minimal odor as well.
The protective value of WD40 is minimal; it's simply not for that. WD-40 is a solvent that strips away rust, dirt, grime, and lubrication. If you need to clean a metal part, WD-40 works great. However, you will need to then clean the WD-40 off said part and apply a lubricant after.
If your doors have vinyl tracks, be sure to use a lubricant that's silicone-based and non-stick. A silicone, non-stick lubricant is essential for vinyl tracks so the door slides easily and the lubricant doesn't attract dirt that can cause a clog in the track.
It displaces moisture and provides excellent lubrication, protecting and extending the life of your tools and equipment. As it's silicone-based, it's perfect for using on rubber parts like pipes, window seals, plumbing fittings and belts.
It is important to lubricate all moving parts of your garage door every six months including the garage door track.
Using a mild detergent is the best way to clean a garage door safely. And don't forget, affordable. You can use dishwashing detergent or carwash liquid. Harsh chemical cleaners such as bleach can discolor your door's finishes and ruin the visual appeal.
Should You Use WD 40 on Sliding Glass Door Tracks? Using WD-40 on sliding glass door tracks is not recommended. WD-40 can attract dirt and debris, which can worsen the problem over time.
Chain/Belt Drive: Garage door openers with chain or belt drives must be lubricated regularly. Otherwise, they can rust and malfunction.
The Golden Rule of garage door lubrication is to never use WD40.
Using a damp cloth, clean out the tracks carefully. You want to remove all the debris, and you may wish to use a vacuum to reach and remove any trace of dirt. Apply a thin layer of clear lubricant spray. You will also want to make sure there are no bends or pinches in the garage door track.
Clean the Door Tracks
Sometimes excess debris in the garage door tracks can cause your door to squeak even more. Though you don't need to lubricate them, cleaning your tracks keeps your garage door running smoothly.
One of the most recommended lubricants for sliding glass doors is silicone-based sliding door grease. This type of lubricant offers excellent durability and water resistance, making it suitable for both indoor and outdoor applications.
Silicone: Silicone lubricant is the ultimate solution for garage door maintenance. Formulated with high-quality silicone oil, it excels in providing long-lasting, all-weather lubrication that keeps garage doors running smoothly and quietly.
Myth: WD-40 Multi-Use Product is not really a lubricant. Fact: While the “W-D” in WD-40 stands for Water Displacement, WD-40 Multi-Use Product is a unique, special blend of lubricants. The product's formulation also contains anti-corrosion agents and ingredients for penetration, water displacement and soil removal.
Alloyed or unalloyed mineral oils or synthetic oils can be used for rolling bearings. Mineral oils are used more frequently. Synthetic oils are only required for very high temperature ranges. The viscosity of the oil must be precisely matched to the specific area of application.
What Is the Best Lubricant for Door Hinges? The best lubricant for squeaky door hinges would be either a silicone spray or lithium grease.
In addition, you'll need to make sure you have cleaned up the WD-40® Multi-Use Product. WD-40® is very good at removing silicone sealant, but make sure you completely remove it from the surface before applying any new silicone sealant, as they can react.
How to remove bath sealant with WD40 - the spraying of WD40 softens the sealant and makes the job so much easier! It is very important to allow the WD40 to soak for 30 minutes.