The cleaning enzymes in laundry detergent work great at pulling away dirt from floors. Fill your mop bucket up with hot water, then add one teaspoon of laundry detergent (a little goes a long way). Make sure to wring out as much water as possible from your mop as you clean—too wet and you'll leave streaks.
According to the Go Clean Co pros, Tide is safe and effective to use on hardwood, engineered hardwood, tile, laminate, vinyl plans and linoleum floors.
The bottom line is yes. “I recommend you take the same precautions that you would with any product that you're using around pets and kids,” Maker says. Unless your children are regularly licking the floors (which is a bigger issue), it's totally safe to mop with detergent.
Floor Cleaner
The cleaning enzymes in laundry detergent work great at pulling away dirt from floors. Fill your mop bucket up with hot water, then add one teaspoon of laundry detergent (a little goes a long way).
Aslett recommends an easy cleaning solution: a quick squirt of dish detergent in a bucket of water. “Dish detergent is made to cut through grease and grime. Just don't use too much or the floors will be dull.”
Why Laundry Detergent isn't appropriate for floors
pH: The alkalis in laundry detergent are too strong for your floors. If you have hardwood floors, luxury vinyl plank, or tile, your floors will prefer a neutral pH cleaner.
If you see a laundry detergent stain on the hardwood floor, you use water and white vinegar to clean it properly. Yes, You can use laundry detergent to clean the garage floor. Garage floor made with hard material. So you can clean the garage floor with laundry detergent without any problem.
You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer's instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.
You can safely use Swiffer products on hardwood floors. For a quick clean, try Swiffer WetJet Wood Starter Kit. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won't damage them.
Over an extended period, vinegar may accelerate the dulling of your hardwoods. An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). For spot cleaning needs, sprinkle baking soda on the affected area and scrub with a sponge.
Wet mopping can cause your wood floors to swell
The rule of thumb here is that water and wood do not mix. Wood can act like a sponge when it's around water. Too much, and it will start to swell up. Too little, and it the boards can shrink as they dry out.
You fill up the bucket with hot hot tap water to the max line and then add 1 teaspoon of powdered Tide laundry detergent. Yep laundry detergent. And it has to be Tide.
They remove anything greasy from fabrics, and they work well on stains and food residues. Surfactants break up stains and disperse dirt that otherwise wouldn't dissolve in water.
Mop Hardwood Floors
Heavily used areas should be cleaned more often, every week or two. Another way to clean hardwood floors is to use a flat mop and hardwood floor cleaner, according to the manufacturer's instructions.
Any high-traffic areas in your home should be wet mopped once a week. Rooms in your home that are not frequently used—such as a guest room—do not need to be mopped weekly. Mopping every other week or monthly should be sufficient.
Once a week, wood floors should be cleaned in high traffic areas with a damp mop. Low traffic areas can be done less frequently, like once a month or once a quarter. Unsealed wood floors are more susceptible to water, so make sure that the mop is just slightly damp.
Floor Mopping
All you need is 1 to 2 tablespoons of dish soap mixed in with a bucket of water. Floors will be clean and shiny in no time. Dish soap is very effective on resilient floorings, such as linoleum and vinyl, and also works well on ceramic tile.
Pine-Sol is safe on hardwood floors and can be used to clean and disinfect them. What is essential is to use the right concentration and correctly follow the instructions: Sweep or vacuum the floor to remove loose dirt and debris. Take ¼ cup of Pine-Sol and mix with a gallon of water in a bucket.
Residues from previously used chemicals, grout & plaster dust, builder's cleaning practices, spills & staining cause streaking. Even after the floor surface is buffed residues can still be lurking in the porous grout lines. When wet, the mop moves across and spreads streaky residue across the surface of the tile again.
The best way to get your floors really shiny is to buff them carefully and thoroughly with a soft microfibre, cotton, or chamois cloth immediately after they have dried. This technique will work really well to shine up tiles, laminate, polished stone, or lino.
Vegetable Oil & White Vinegar: Mix equal parts vegetable oil and white vinegar together to make a simple, yet effective, cleaner for your hardwood floor. Vinegar is a natural polish that is perfect for cleaning. It's acidity will help break down dirt and grime.
The good thing about the fabuloso cleaner is that it can be generally used for all the wood floor surfaces. It is a good multi-purpose cleaner of which you can practically use to effectively clean the floor surfaces around your home.
Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.