Can I use concrete deck blocks instead of footings?

Editorial team Published on

Yes, you can use concrete deck blocks instead of traditional poured concrete footings, but only for low, free-standing, and single-level decks. For attached decks, elevated structures, or areas with heavy frost, traditional footings are required to meet code.

Do deck blocks need footings?

Footings are critical for decks that have many levels, heavy loads, or are attached to the house. They are also used for decks that will be built in areas with heavy snow or high winds, as they provide a stronger foundation to withstand the weather.

Can you use concrete blocks as footers?

Concrete Deck Blocks: These are precast blocks that act as surface footings. They're heavy but familiar and widely available.

What is an alternative to deck footings?

Depending on your deck’s height, building codes, and soil conditions, alternative deck footings can save you significant time, money, and back-breaking labor compared to pouring traditional concrete piers.

Are deck blocks a good foundation choice?

They are just one option for support deck weight and come with certain pros and cons. Perhaps the biggest drawback to concrete deck blocks is their limited potential as you never want to bury them in the ground thus causing potential rot issues with the wooden deck posts.

Why Use Concrete Footing Blocks? || Dr Decks

When not to use deck blocks?

Soil Stability: Deck blocks rely on stable ground for support. They work best on compacted, stable soil but are not a good choice on loose or shifting soil or areas with heavy freeze-thaw cycles.

How many TuffBlocks do I need for a 12x12 deck?

For a 12x12 floating deck, you will typically need between 16 and 25 TuffBlocks. The exact number depends on your joist span and the framing method you choose (using a beam/bearer layout vs. resting joists directly on the blocks).

Do deck blocks meet code?

Code Compliance

Many local building codes have specific requirements for deck foundations. Deck blocks may not meet these regulations, leading to potential legal and safety issues. Ensuring compliance with local codes is crucial to avoid fines and ensure the safety of your deck.

What is the easiest footing for a deck?

One of the simplest and most affordable footing types, deck blocks are small precast concrete piers that support the weight of your deck on top of them. Deck blocks are typically placed at regular intervals around the perimeter of your deck. They are easy to install, but not as strong as some other footing types.

What are the biggest deck building mistakes?

Pro Tips for Deck Builds: Avoid These Common Mistakes

  • Mistake #1: Skipping the Permit Process. ...
  • Mistake #2: Choosing the Wrong Lumber. ...
  • Mistake #3: Poor Footing or Post Placement. ...
  • Mistake #4: Incorrect Fasteners and Hardware. ...
  • Mistake #5: Forgetting to Plan for Drainage.

What are the disadvantages of concrete blocks?

Cons of Using Concrete Blocks:

  • Aesthetics: Concrete blocks may lack the aesthetic appeal of bricks. ...
  • Durability: While concrete blocks are durable, they may not have the same longevity as bricks, especially in harsh weather conditions. ...
  • Sound Transmission: ...
  • Heavier Foundations:

What is the cheapest way to build a foundation?

A monolithic slab is a single concrete foundation poured directly on the ground, which serves as both the floor and the footing edges. It's the simplest and most common type of foundation, often the lowest in cost.

Is concrete block considered a permanent foundation?

Yes, concrete blocks (Concrete Masonry Units) can be considered a permanent foundation, but only if they are mortared, grouted, and firmly anchored to a poured concrete footing and the structure. Simply stacking dry blocks on the ground does not qualify.

Can concrete blocks be used for footings?

Concrete block foundations, or Cinder Masonry Units (CMUs), are made from stacked cinder blocks. Using the CMU method, the footings are coated with mortar—a mixture of sand, water, and fillers to bind masonry—then cinder blocks are layered evenly on top. The process is repeated until a foundation wall is formed.

Do I need gravel under deck blocks?

Yes, a gravel base is highly recommended under deck blocks. It provides critical support by preventing the blocks from sinking into the soil, promotes proper drainage, and keeps the blocks perfectly level for your floating deck.

Do I need rebar in my Sonotube?

Whether Sonotubes need rebar depends on what you are building, but for most structural applications (like a deck, porch, or home addition), yes, you need rebar.

How many footings do I need for a 12x12 deck?

A standard 12x12 attached deck typically requires 4 footings placed at the corners. However, depending on your deck design, beam size, and local building codes, you may need up to 6 footings to support heavier loads.

What are the common footing mistakes?

Improper Footing Depth

One of the most frequent reasons for a failed footing inspection is an inadequate footing depth. Building codes and standards specify minimum footing depths to ensure that the structure can withstand various environmental forces, such as frost heave and soil movement.

What is an alternative to concrete deck footings?

Alternatives to concrete footings depend on whether you are building a freestanding "floating" deck or an attached structure that requires heavy load-bearing support. Top options range from lightweight composite deck blocks and pre-engineered pin-driven piers to deep steel screw piles and ground spikes.

What are the pros and cons of deck blocks?

Deck blocks offer advantages like cost-effectiveness and flexibility but also have disadvantages like instability and a lack of long-term durability.

What is the 3/4/5 rule for decking?

The 3-4-5 rule is a fundamental geometry technique (based on the Pythagorean theorem) used to ensure your deck frame forms a perfectly square 90∘90 raised to the composed with power90∘ corner. It works by making the side lengths of a triangle proportional to the numbers 333, 444, and 555.

Do I need deck blocks on every joist?

No, you do not need deck blocks under every single joist. Instead, deck blocks should be placed in rows under the main supporting beams, typically spaced every 4–6 feet along those beams. Joists then rest on the beams rather than directly on the blocks.

What accounts for 90% of deck collapses?

Ledger board failure (or the separation of the deck ledger board from the house) accounts for roughly 90% of all deck collapses. This connection fails most often due to water damage, inadequate fasteners (like nails instead of bolts), or missing tension ties.

← Previous article
What does latex paint not stick to?
Next article →
How do you remove hardened glue residue?