Mainly, you may be using white vinegar for cleaning different household surfaces. But, it is not recommended to use vinegar on natural stone, due to its acidic property. ⇒ While using vinegar on granite countertops or natural stone surfaces, may damage the seal and polish layer applied to them.
It's essential to only use cleaners which are appropriate for natural stone surfaces. This means avoiding using vinegar. Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects. It can even lead to burning or etching to occur on the surface of the stone.
Countertops. If you want to keep your stone countertops looking beautiful, don't reach for vinegar. The acid etches and dulls natural stone such as marble and limestone. It can slowly dissolve them, according to Beckman.
If you are cleaning your natural stone floor or counter top like Marble, Limestone, Granite, Slate, Quartz or Travertine ect. if you use white vinegar on the natural stone it will react with the lime in the stone and etch or take off a layer of the stone and make it look dull and take away the beauty of the stone.
Rocks that contain calcium carbonate can erode when they encounter acids, and limestone contains calcium carbonate. Vinegar is acetic acid, and limestone is a base. An acid plus a base causes a chemical reaction. So, vinegar combined with limestone creates a chemical reaction.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Change the rinse water frequently.
Baking soda is known as a stain remover. It can help to remove liquid stains such as tea, wine or coffee. It also helps to remove the unpleasant smells. It is quite affective on solid surfaces in general but it is not advised to use baking soda directly on natural stone surfaces.
Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
Whilst vinegar will not directly dissolve concrete itself, but it will degrade the cement that binds your concrete slabs or flags together. Extended exposure to vinegar will also cause any polish or sealant on your pavers to erode over time, leading to bleaching, stains and weathering.
Clean all stone surfaces with a neutral cleaner, stone soap, or a mild dishwashing detergent and warm water. Rinse the surface thoroughly after cleaning and dry with a soft cloth. Never use abrasive cleaners, such as Comet or Soft Scrub. These cleaners could scratch or dull the surface of the stone.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time. Basically, the harsher the cleaner, the quicker it will break down the sealant.
What should have happened: Lemon juice and vinegar are both weak acids. The lemon juice contains citric acid and the vinegar contains acetic acid. These mild acids can dissolve rocks that contain calcium carbonate.
Add undiluted vinegar to a bucket and apply it to your stone with the plastic brush. See if it removes the white residue. If it does then you don't need to use muriatic acid. If you need the muriatic acid you'll have to dilute it according to the directions on the bottle.
Staining agents commonly present in the kitchen, bathroom and other areas where natural stone is used include: Organic materials, such as wine, fruit juice, food scraps, tea/coffee and leaves. Oils, such as cooking oil, cosmetics, grease and oil-based paint. Ink, such as pen or marker.
If your white landscaping stones are still not completely clean after hosing them down, there are a few natural solutions you can try. A mixture of white vinegar and water can help remove any stubborn dirt. Baking soda can also lift dirt, and is best used with warm water and an abrasive brush.
Cleaning your stone shower once a week can help reduce grime, water deposits, and mildew build-up. Use stone-safe products, rather than vinegar or ammonia. Such products are too harsh on stone; their acids break down sealants and discolor surfaces.
I had no idea you could use a few drops of simple dish soap like Dawn or Palmolive to a liberal amount of water will clean your marble floors/vanities and counter tops. A simple everyday household product sitting on your sink. It cuts through grease yet it's mild and rinses and will not harm stone.
When using Dawn Powerwash, you should avoid cleaning porous surfaces such as marble and other soft natural stones or untreated wood. It is also best to keep Dawn Powerwash away from painted surfaces, too.
“Set time,” or the time a disinfectant must rest on a surface in order to work effectively, is also important. The set time for vinegar can be up to 30 minutes.
Now, don't confuse distilled with basic white vinegar, which is stronger and has up to 25% acetic acid. That vinegar is sold exclusively for cleaning purposes and is not a good idea to ingest. However, beyond cooking, distilled white vinegar can be used for many of the same household chores.
Undiluted, it can irritate your skin or nails, though, so be sure to wear gloves. For everyday jobs, diluted cleaning vinegar will get the job done. Make an all-purpose cleaner by combining two-parts vinegar and one-part water in a spray bottle.