Neither will chlorination be effective with a diffuser and without a pump. The best thing to do is to apply liquid chlorine in the pool. Then, you have to circulate the pool manually with the use of a telescopic pole or paddle. This will ensure the chlorine disperse well.
While a typical free available chlorine level is recommended at 1-3 parts per million (ppm), without the pump or filter, you should maintain somewhere in the 3-4 ppm range to prevent debris, algae and other problems from potentially developing.
Pool pumps typically disperse chlorine into the water for you, but it is possible to add chlorine without a pump. The easiest way to do this is with chlorine tablets. They go in a designated floating container and slowly dissolve while floating around the pool.
Your pool can keep running for a few days with no problems while without a pump. However, know that a standard pool needs a pool running for at least once in 24 hours, or you might notice an algae bloom. So, it's best to have your pump ready as soon as possible.
All other types of Intex swimming pools do not require an air pump.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Dry running occurs when a pump operates without adequate liquid. This leads to a surge in pressure, flow or overheating that will instigate a pump failure. As a result, the pumping elements seize up on the shaft.
In most cases, you can operate the cartridge pool filter without the filter cartridge inside the tank just to maintain circulation as you wait for the cartridge to dry. However, doing so requires you to ensure you've removed all the internal parts and reassembled the tank tightly.
The best thing about this dry liquid chlorine formula is that it dissolves very rapidly, even in cold water temperatures. We've packaged it in an easy to pour bottle, just walk it around the pool – no need to pre-dissolve.
Potassium peroxymonosulfate: A less costly, non-chlorine shock. Add it directly to your pool water at any time. Takes roughly 15 minutes to work before you can safely swim.
So yes, while it's perfectly fine to run your pool pump without a filter cartridge installed, it's better to have a backup filter cartridge to ensure that you don't have to run it without one.
Don't bother running electric for an intex pool. They're meant to be temporary structures. Without a pump/filter using your vacuum to move around the water is your best bet.
Dry running is usually undesirable in a centrifugal pump; it occurs in the total absence of the liquid component of the fluid handled (e. g. following the ingress of air in the suction line) or if under normal operating conditions gas bubbles (see Formation of air pockets) attach themselves to normally wetted rotating ...
Generally, sump pumps can run for six to 24 hours continuously, depending on how heavy the rainfall is and the quality of your pump. The aftermath of torrential rains or even flooding puts a higher demand on your sump pump to keep your home's low areas dry.
A pump can also burn out from having the pump run dry. Submersible pumps require water to keep cool and maintain the proper operating temperature. If the water level drops below the impeller, the motor will overheat and burn out.
Clorox itself recommends using between 100 and 200 ounces of regular-strength bleach per 10,000 gallons of pool water -- one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes. Pool professionals tend to recommend more conservative amounts of bleach.
It takes a lot of chemicals to make pool water safe for swimming. Untreated water can accumulate harmful Escherichia coli and Salmonella bacteria and protozoans such as Cryptosporidium parvum and Giardia lamblia.
Above-Ground Pool Pumps
To keep the water clean and circulated, you will need a pump and filter for your pool. The size and capacity of these units vary and will need to match the volume of your pool. When in doubt, consider going with a slightly bigger pump than you think you need.
You can do your own pool work, including using chlorine--even without a filter.
To keep the pool clean without a filter, it is necessary to use chlorine with a flocculant or to use a flocculant chemical. This product groups the impurities that float in the water, causing them to fall to the bottom of the pool so that they can be removed later with a cleaner.
What can happen if you go into a pool too soon after it's been shocked? There are a few potential issues. "Chlorine will react with water to produce an acid," Alan says. "The effects will be different depending on whether chlorine is inhaled or whether there is skin or eye contact."
Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.