If your wood floors continue into other rooms of the home, you cannot sand, stain and refinish the one area. This would affect the uniformity and leave the rest of your wood floors looking different. The only way to refinish one room is to install a transition piece (or if there's one in place already).
Work in small sections with the grain of the wood. Polyurethane requires multiple coats. Between each coat, let the product dry completely (refer to manufacturer's instructions for drying times) and buff the floor between each coat.
You could install a thin threshold between each room. That would cover the overlap in finish between the rooms. If the planks run parallel to the doors, you could cut out one board between the two rooms. That would give a clean line between finishes (and place the one board back at the end.
When refinishing one room at a time, it's almost impossible to create uniformity from room to room, especially if you're staining. Some will suggest using a transition strip to create a definite barrier between the finish of one room and the next.
When Refinishing is the Best Option
Dry, grimy floors with deep scratches and wide gaps need refinishing.
If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project ...
If I had to pick an ideal time, I would say spring or fall when the indoor temperature is most consistent with outdoor temperature and it's often easy to open the windows (after the work is complete) to help air out the smell faster. But, really, sanding and refinishing hardwood can take place any time of year.
Work in small sections and wipe away any excess with a rag before moving on to the next section. Try not to let the wet edge dry. It's best to do this part with someone else who can use a rag to wipe up the excess behind you, or go back over the floor with a rag underneath your buffer to mop up the excess stain.
The answer to the question is, “do the floors first!” Here's why: Removing and replacing flooring or carpeting is dirty work. If you paint first, and then do floors, there is a good chance that a lot of dirt, dust, sawdust or tile/stone dust will end up on your freshly painted walls and trim.
Furniture should be removed if all floors in a house must be refinished. Moving the furniture from room to room is difficult and time-consuming. Instead, removing the furniture from the house requires only two moves, instead of constant shifting throughout the refinishing process.
Hardwood flooring can be re-sanded up to 10 times, depending on how bad the floor is and how skilled the person doing the sanding is. It costs about $2.50 per square foot to refinish a floor, plus $50 an hour for patching and thresholds.
Sweep or vacuum, then mop with a commercial wood floor cleaner or solution of a quarter-cup of dish soap and a gallon of warm water to lift any lingering grime. Give the floors a final pass with a clean, water-dampened mop to remove any cleaner residue. Dry completely with a soft, clean towel.
Despite the fact that sanding the floor by hand sounds like a lot of hard work and too much time and energy to invest, the truth is that hand sanding a wooden floor is sometimes actually more efficient and quicker process.
Hardwood floor refinishing can help you get rid of those unsightly scratches and marks. But as long as the damage is shallow—in the coating and not in the wood itself—you can renew the hardwood floor by adding a new coat of polyurethane right over the old finish.
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Luckily, you have options other than leaving the floor as it is or replacing it. The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.
If the floor happens to be raw wood, paint can seep into the wood and stain it almost beyond repair. You would have to sand deeply into that raw wood to remove the paint pigment. So, even if you choose to paint the walls first, it's best to protect your flooring from paint drips.
Refinishing hardwood floors is more cost-effective than replacing them. On average, it costs about $2,000 to $7,000 to replace hardwood flooring (two to three times more than to refinish).
Depending on the product used, and the current weather conditions, each coat could take either hours or days. Figure at least two days for the “sand and poly” job or three to seven days for a full refinishing project, plus at least one day if you're adding color.
Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood. There's no stripping or heavy sanding necessary to remove the old finish!
The answer is usually YES!
Many homeowners don't realize that you can change the color of hardwood flooring when you refinish your floors. Yes, it's true…you can go light or dark or red tones or anywhere in between. Most are pleasantly surprised it doesn't matter if you are going light to dark or vice versa.
Please note that refinishing hardwood floors gray is challenging and should be handled by an expert, especially one with experience in gray and white washed floors. First, the sanding must be immaculate. Stain should be consistent and applied in strips to avoid any cross-grain color-variant lines.
You can undertake to refinish yourself — but the professional treatment is sure to leave you most satisfied. Resurfacing your floor involves more than just putting a layer of polish on top. It may require removing old floorboards, grinding down uneven boards, and reinforcing wood planks with new nails.
When sanding any floor, the amount of wood you remove depends on the coarseness of the paper you use. Flooring professionals can sand away as much as 1/16 inches of wood with the coarsest paper.
Wait 3 weeks before putting area rugs on newly refinished/finished hardwood floors. Wait 48 to 72 hours after the hardwood has been refinished/ finished before "PLACING" furniture back in its place. Keep a steady temperature and humidity within your home.