By simply adding algaecide to your water prior to closing, you can prevent algae growth from occurring during the cold, winter months which makes for an easier opening in the spring. You can apply algaecide directly to the pool water and allow the pump to continue to circulate for approximately two to four hours.
If your pool has been green all season you're probably super excited to close it. While it seems like the easiest option – it's not! It's much smarter to close your pool as clean as possible. Algae can grow in water as cold as 50 degrees.
When closing and winterizing your pool, it is important to remember to balance your pool water's chemistry prior to closing and don't forget the algaecide. Algaecide is simple and effective with one quart of winter algaecide typically enough to treat 20,000 gallons of water all winter long.
Use the biguanide algaecide for your pool, measuring 16 ounces for every 10,000 gallons of water.
Also, check your pump basket more frequently since leaves and pine straw are falling. Chlorine: When water temperatures are 51 degrees and below, you will not need to add chlorine because algae and bacteria stop growing at this temperature.
A late September or October closing is a great way to set up for success in the spring. If you are already suffering from an algae bloom; take care of that before you close. Opening your pool early in the spring is a good idea if you want clear water.
Cleaning your pool before closing for the winter prevents algae and makes your spring opening even easier. Make sure to thoroughly brush the sides and floor, skim the surface and clean out the skimmer and pump baskets after vacuuming the pool.
Algaecide should be added to your pool water on a weekly basis. Preventing algae is the key to fun in your pool. Algaecides act as a backup to your normal sanitization program and prevent algae from starting and growing in the pool. Algaecide should be added after every shock treatment.
Now is the time to add Pool Clarifier and let it circulate for 12 hours. This will clump the algae together into vaccumable pieces. Shut your pump off and let the cloudiness settle. This may take up to a few days for very cloudy pools.
Winter Pool Algaecide is highly effective at preventing all forms of algae. Polymer pool algaecide stays strong all winter providing dependable control of algae growth throughout the winter season. Unique winterizing algaecide is specifically formulated to fight cold weather algae for up to 5 months in a covered pool.
Green discoloration in a swimming pool is caused by the growth of algae, a type of green aquatic plant that floats on the surface of water. Algae usually flourishes in warm water but can still take over your pool in winter if given half a chance.
Pool water turns green because of algae in the water. Algae can grow rapidly, particularly when it's warm like Summer, which is why it can surprise you overnight. This generally comes down to an imbalance or lack of chlorine in the water.
Green pool water is often caused by the presence of algae in your pool. Algae blooms can appear when your pool has a low Free Chlorine. Exposure to high heat, heavy rain or poor circulation, without the use of a preventative algaecide, also increase your risk of developing pool algae.
When the levels are properly balanced, chlorine will keep the algae at bay, but the water will slowly begin to turn green as the algae take over if there's not enough. But be careful—adding too much chlorine in pool water can cause those metals to oxidize and turn the pool a different shade of green.
Covering the pool is a good way to prevent algae growth. The right cover keeps algae from entering the pool, but it also keeps leaves, bugs, bacteria, and dirt from decomposing in the pool, providing algae with food.
Even the cleanest pools have microscopic algae but it waits for an opportunity to grow exponentially. When conditions such as out of balance water, warming temperatures, sunlight, and nitrates occur at once, an algae bloom can spread in just hours time.
Add a dose of algaecide, bring your chlorine level high by shocking, and run the filter continuously until the problem clears. The next day you should vacuum up the dead algae and backwash your filter. Algae thrives in hot weather and in pools with low or no chlorine.
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
If you add algaecide, keep in mind that some algaecide contains copper, which can actually make a pool cloudy. If the cloudiness persists 24 hours after shocking, then it's possible that you used a poor-quality chlorine shock.
Lower the water level to just below the mouth of the skimmer. This removes the water from the throat of the skimmer, which could easily sustain damage should water left there freeze. Also remove the water from the plumbing lines using a shop vac. Be sure to plug the empty lines to prevent them from refilling.
pH Balance and Chlorine
Algaecides do not directly affect the pH balance in your pool, but too much algae will raise the pH level. By eliminating algae, the algaecide helps return pH levels to normal. Algaecide also works together with chlorine, helping the chlorine to be more effective against algae and bacteria.