Yes, you definitely can! Something you should keep in mind, though, is you'll have to cut out the front of the cabinet and remove the counter top prior to farm sink installation. If you want to make the job easier, consider getting a retrofit farmhouse sink, which is meant for a standard kitchen sink base.
Consider the size of the sink. The base cabinet should be wide enough to accommodate the sink, with additional space on either side for plumbing and dish soap. It should also be deep enough to prevent water from spilling out onto the floor. Think about the type of material you want the cabinet to be made of.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet. This requires a full re-design of the cabinet and countertop where your farmhouse sink is installed.
The average 24″ sink base cabinet comfortably accommodates a standard 22″ sink; be sure to consider the depth of your sink when planning storage inside the base cabinet.
If there isn't enough width available in the cabinet, you won't be able to go for the bigger sink, even if there is room on the counter. Also, remember that you are going to have to create a larger hole in the counter to suit the new sink.
The most common sink sizes for a 30-inch cabinet are 24 to 27 inches wide. These sizes offer a comfortable fit within the cabinet and provide enough room for daily use.
Yes and no, there is a specific cabinet for farmhouse sinks. However, a standard sink base cabinet can be modified to fit a farmhouse sink. If you are using a standard sink base cabinet, the top half of the cabinet will have to be cut out, and the doors will have to be modified.
A standard kitchen sink is typically made of stainless steel or porcelain. With farmhouse sinks, you can find them crafted of anything from enameled cast iron to fireclay. Farmhouse sinks are now offered in a myriad of modern designs, too. You're not just limited to the classic white sink.
In order to maintain the good health of kitchen sinks, it is essential that they are properly vented. Sinks, and kitchen sinks in particular, usually have to be vented for safety reasons. It does not matter what kind of sink you have, it still needs a vent.
It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
If you want a farmhouse sink, then you can't go any wider than the front face (24" for a 42" corner cabinet). With an undermount or drop-in sink, you can go a little wider since the sink will be set back a few inches.
Keep in mind that you can put the sink anywhere you want, but changing the plumbing will affect your budget. 2. What appliances does it need to be near? Another practical issue is where the sink should be located vis-à-vis other appliances or work spaces.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten. If you eliminate the clips, you eliminate the need for access.
But what actually makes a sink considered “farmhouse” style? The TLDR definition of a farmhouse sink is “a deep sink that has an exposed front-facing side.” Thesaurus may also refer to it as an “apron front” sink – which, in our opinion, is the best description as it literally acts like an apron as you wash.
The attractive and streamlined design of the farmhouse sink can add dollar value to your kitchen and your home overall. If you're thinking of selling your home down the road, the farmhouse sink is many home buyers' dream kitchen statement piece.
Most farmhouse sinks also commonly known as apron-front sinks can easily replace your current kitchen sink owing to the similarities in size and the option to just slide it in after removing the old sink. However, closed counter cabinets would require some more time and effort.
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
Farmhouse sinks typically feature larger, deeper basins than other types of kitchen sinks. These were beneficial for meal prep and clean-up for traditionally large agricultural families. Farmhouse sinks in a modern era still adhere to that basic simple, but ample and efficient, design.
Another larger option, that provides more variety in its use is a 29" double bowl sink. This sink will fit in your 30" kitchen sink base cabinet and provide you with two 16x13"basins.
Dawn 22" Undermount Stainless Steel Kitchen Sink
This little gem measures overall at a little less than 22" left to right. This allows this sink to very easily fit in a 24" sink base cabinet.
A typical 33 x 22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout. If the cabinet allows, you may be able to install a larger sink by expanding the cutout. A farmhouse sink may require a special cabinet size.