Depending on your current flow rate, you may be able to increase the flow simply by removing the filter or restricting device or replacing the showerhead with a higher-flow model, such as increasing to a standard 2.5 GPM head. Before you change the showerhead, make sure that the new model is legal in your area.
Will buying a new shower head increase water pressure? If you buy the right shower head it will increase how powerfully the water comes out of the showerhead even though it isn't actually increasing the water pressure of the home itself, it does increase the water pressure coming out of the showerhead.
But when it comes to upgrading your shower routine to make it feel a bit more special, think beyond just the products you're using — like changing out the hardware in the shower itself. Swapping out a run-of-the-mill shower head can make a huge difference when it comes to your time spent under the spray.
When shopping for shower heads, be sure to compare “apples to apples.” A 2.0 GPM shower head simply will not reproduce the flow rate of your old, 3.5 GPM shower head. Know the Laws. Depending on where you live, retailers may only sell shower heads with a maximum of 2.5 GPM, 2.0 GPM, or 1.8 GPM flow rate.
9. Do all shower heads have removable flow restrictors? All of ours do, but fewer and fewer on the market are removable and more convert each year to be the non-removable type.
Two big reasons: To help lower utility bills -- and to conserve water. According to the EPA, the average family could save 2,700 gallons per year by installing WaterSense labeled showerheads. Since these water savings will reduce demands on water heaters, they will also save energy.
If low water pressure is affecting only your shower head, you should check for an obstruction in the shower head or see if your shower head has a water conservation filter installed. Otherwise when demand for water is high (such as in the morning or early evenings) pressure can be lower than during the rest of the day.
Generally, this is around 1-1.5 bar, although it can sometimes be more. The majority of taps and showers can be chosen with this kind of pressure.
Pressure-Reducing Valve
Look on the main supply pipe near your water meter for a conical valve that has a bolt sticking out of the cone. To raise pressure, turn the bolt clockwise after loosening its locknut. Keep an eye on the gauge to make sure the pressure is within bounds, then retighten the locknut.
A quick and easy way to increase water pressure is to adjust the pressure-reducing valve, which can be found in your home, usually close to your water meter.
If you're experiencing low shower pressure, take these initial steps to find out what could be causing the problem: First, clean your showerhead thoroughly. Ensure the shower hose isn't kinked or damaged, then check the filter. This might require taking your shower apart, so consider asking a professional to help.
Flow restrictors limit the amount of water flowing downstream, while pressure regulators affect the pressure of upstream water by changing the flow of downstream water. Water pressure regulators are not designed to control flow rate. However, they affect flow rate by managing the pressure within a water line.
A standard 2.5 GPM shower head uses 2.5 gallons of water each minute. That's 25 gallons for a 10-minute shower. VS. A low-flow 1.8 GPM shower head uses 1.8 gallons of water each minute.
A water flow restrictor is usually a flat, circular, plastic piece. The center of the restrictor is shaped like a star, or similarly shaped, and comes in a variety of colors.
Please keep in mind that all new faucets since 1994 are restricted to conserve water per EPA code mandates. Older faucets had no restrictions. Beyond intentional flow restriction, new installations can sometimes have reduced flow if the lines are not flushed prior to installation of aerators or shower heads.
If you're looking for the most pressure, go for the 2.5 GPM Flow Rate, unless you are restricted because you reside in California, Colorado or New York. Again, this has been the Maximum Flow Rate since 1992.
Depending on your current flow rate, you may be able to increase the flow simply by removing the filter or restricting device or replacing the showerhead with a higher-flow model, such as increasing to a standard 2.5 GPM head. Before you change the showerhead, make sure that the new model is legal in your area.
Normal water pressure is generally between 40 and 60 PSI. Most homeowners prefer something right in the middle around 50 PSI.
Hotel Anystream with Adjustable Showerhead
Featured in luxury resorts around the globe, the Speakman Hotel Showerhead is known for its legendary performance and unrivaled quality. Equipped with 50 full-coverage sprays and 8 center massage jets - this fixture is engineered to deliver a truly satisfying experience.
Many people don't realize it, but shower heads should actually be replaced every 6 to 8 months.
A high pressure shower head sprays out water with more force, maximizing the water flow, giving you a more complete cleaning experience, but using more water and energy. A high pressure shower head provides a spa experience with natural massage therapy and different spray patterns that is beneficial to your wellbeing.