Regular toilets require access to the main plumbing system and a lot of space. An upflush toilet only requires minimal space for installation and can be installed almost anywhere. Easy installation: Upflush systems are much easier to install than traditional toilets, which require construction work and plumbing.
A toilet can be placed anywhere there's A 4'' to 6'' waist line that leads to a septic system or city sewer system. It doesn't necessarily have to be on the wall, although 95% of toilets are on a wall. Why the wall is another story but I will give you one reason ``back to back plumbing''.
The correct measurements for a toilet is at least 21 inches in the front of the toilet, 15 inches on the sides, and at least 30 inches from anything else in the bathroom. This means the sink and the bathtub.
Toilets. The waste pipes for toilets are often buried in the cement foundations of your home, so you can expect to pay $2,000 or more to move a toilet.
A dry-flush toilet.
Composting toilets don't require plumbing or a drain, but they do require a vent pipe, which would require cutting through a wall or roof. A better option is a battery-powered dry-flush toilet like this one. It uses a vacuum-sealed mylar bagging system, and can be operated literally anywhere.
Usually, adding a downstairs toilet to your home does not require planning permission, unless it is part of a larger extension. This does vary depending on where you live, whether your property is within a conservation area or is of historical significance.
A composting toilet is the original toilet without plumbing. Designed to handle waste management in a hygienic and environmentally friendly fashion, these composting toilet systems are popular in both homes and outbuildings. They are good for the environment, and they are also known as "dry toilets”.
The challenge in moving a toilet is actually due to drainage and water supply plumbing, not so much the literal installation of the fixture. Once you move the toilet drain and water supply, the rest of the job can move along quickly.
With average costs for toilet installation ranging from $224 to $533, most people around the country are paying $374 for toilet installation costs. While they are paying $120 on the lower end, installation costs can go as high as $826 in some cases.
Sinks are the least expensive to move, so long as they stay on the same wall. Toilets are the most costly to move, especially on the second floor of the home. Bathtubs require the plumber to relocate the hot and cold water and drainage, making them expensive to move.
Ideally, the toilet seat should face the north or south direction. This positioning is believed to channel negative energies away from the bathroom space. Avoid having the toilet seat face the east or west, as it is thought to invite negative influences.
Toilet Spacing and Design
At least 15 inches to any partition or side wall (measured from its center). 30 inches minimum away from any adjacent fixture (measured center to center). At least 21 inches clearance from a wall, fixture or door.
Clearance: At least 24" of space is needed in front of a shower or tub entry. Leave at least 15" of space between the shower and toilet or other obstacle.
Generally, a handyman can take care of basic plumbing tasks that don't require extensive expertise or specialized equipment. Your handyman could be the perfect go-to for small plumbing repairs and maintenance. This can include tasks like fixing a leaky faucet, replacing a shower head, or installing a new toilet.
No, Not Always! In modern constructions, local building codes often demand a more separate approach to drainage systems. This means that a toilet and shower typically have their dedicated drain lines and should not share the same pipe.
While it's theoretically possible to add a bathroom anywhere, practical considerations often dictate otherwise. Key factors include the proximity to existing plumbing lines, structural integrity, and the available space.
How Much Should you spend on a Good Toilet? One-piece toilets can range in price from as low as $100 to as high as $5,000 for certain models, although the majority fall within the $250 to $600 range, with an average cost of around $500.
Most toilet installations will take around 2-3 hours. However, this depends on the type of toilet, the installation space, and any toilet or plumbing upgrades that may require additional installation services.
On average, you may expect to pay between £50 and £200 for labour, excluding the cost of the toilet itself.
Total Cost of Moving a Toilet
Taking into account all of the factors discussed above, you can expect to pay between $500 and $1,500 to move a toilet. However, this is just an estimate, and the actual cost may be higher or lower depending on your specific situation.
To move the toilet more than just a couple of inches, you will have to demolish the concrete to access and relocate water and waste lines. Then you will have to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.
A quiet electric-powered pump moves the fine slurry upward under pressure. The small-diameter discharge pipe (as small as 3/4" across), solves many structural problems as it can be run virtually anywhere. The fine slurry moves easily through this pipe to the normal sewage system, septic tank or holding tank.
If moving the toilet makes sense for your layout, is it possible? Of course! It just requires involving the experts like an experienced plumber and a bathroom design professional.
There are all types of Do It Yourself home improvement projects you can take on, but plumbing a toilet may not be one of them. That's because a lot can go wrong—from corrosion and leaks to severe clogs—resulting in expensive, time-intensive repairs. Installing a toilet is challenging, but it is possible.