To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
Yes, you definitely can! Something you should keep in mind, though, is you'll have to cut out the front of the cabinet and remove the counter top prior to farm sink installation. If you want to make the job easier, consider getting a retrofit farmhouse sink, which is meant for a standard kitchen sink base.
To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet.
Yes and no, there is a specific cabinet for farmhouse sinks. However, a standard sink base cabinet can be modified to fit a farmhouse sink. If you are using a standard sink base cabinet, the top half of the cabinet will have to be cut out, and the doors will have to be modified.
The standard size for a kitchen sink can vary, but a typical size for a single-bowl sink is around 30 to 33 inches in width and 20 to 22 inches in depth. Double-bowl sinks can range from 30 to 48 inches in width, depending on the bowl size and configuration.
Both types of sinks are huge, large, and quite deep. However, the apron sink's front area is exposed and visible- which is why they are called apron sinks. These are versatile and modern houses prefer apron sinks. But on the other side, farmhouse sinks look adjacent as well as covered by the kitchen cabinets.
A good place to start when looking for the right size is with the most popular sizes for farmhouse sinks, small, medium, and large. Or the most common, either a 30″ or 33″ single bowl.
We normally go ⅜ inch inside the sink for the overhang, but this can be flexed for the look you desire.
Cut the cabinets
Once you know exactly where you're going to cut, use a jigsaw to cut the cabinet face frame. If using a table saw, you'll need to remove and disassemble the cabinet box completely. Pro tip: Farmhouse sinks can be much heavier than regular drop-in sinks.
Apron sinks, also known as farmhouse sinks, were often found in rural homes in decades past. The original design considered the comfort of women who spent long, long hours at the sink. It was important to them not to have to bend over.
One of the drawbacks of choosing a farmhouse sink is the installation process. Depending on how your kitchen is set up, you may have to alter the size and design of your countertops before the farmhouse sink installation. Farmhouse sinks are much deeper and wider than classic kitchen sinks.
It may be a little unfair to call them trendy though. After all, they're the original modern sink design dating back about 400 years. Nevertheless, they still, arguably, outperform most other sinks available to this day. We took a look at the best designs from the best brands, more modern, farmhouse kitchen sinks.
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
Standard-sized kitchen sinks measure 22 inches by 30 inches.
While the front-to-back measurement of the sink typically remains the same (roughly 22 inches) due to the size of most cabinets, the length of various kitchen sinks can vary immensely.
Standard sink base cabinets are 24″ deep (back to front), and most sinks are designed to fit that size. However, widths vary widely and sink widths vary accordingly.
We kept the original footprint in this kitchen and our contractors were able to retro-fit the existing cabinets to accommodate the apron front sink. To replace the old drop-in sink with a farmhouse sink, we cut the cabinets to fit the apron front and then added filler wood to the sides.
The attractive and streamlined design of the farmhouse sink can add dollar value to your kitchen and your home overall. If you're thinking of selling your home down the road, the farmhouse sink is many home buyers' dream kitchen statement piece.
Most farmhouse sinks also commonly known as apron-front sinks can easily replace your current kitchen sink owing to the similarities in size and the option to just slide it in after removing the old sink. However, closed counter cabinets would require some more time and effort.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten.
Standard sizes & Dimensions – Small & Large
You may need to remove and replace countertops and remodel part of your kitchen to make the sink fit. Farmhouse sinks measure anywhere between 20 inches to 60 inches in length with an average height of 9-10 inches.
Most farmhouse sinks stick out past the face of the cabinets from . 75 of an inch to as many as 2 inches. Take a look at nearby drawers prior to ordering your sink to ensure that you will have clearance when the drawer is extended.