To ensure no residue is left, rinse one final time with clean water (don't add floor cleaners or soap).
Don't neglect to rinse after mopping. Rinsing is an important, often overlooked final step. All cleaning products, no matter what they are, leave behind residue. Dirt, dust, grime, ect, is 'attractanted' to the residue, and 'binds' with it.
You shouldn't ever have to worry about drying your floors after mopping. Use a damp mopping that doesn't leave puddles: that's a basic rule for all flooring to avoid moisture issues. The floor should dry on its own in a few minutes after mopping.
If you use Pine Sol or Mr. Clean, you don't have to rinse. But you may want to take old towels, put one under each one of your feet and ``dry'' the floor with them afterwards. You'll be stunned how much dirt still comes up after you've wet mopped.
To clean and sanitize hard, non-food, non-porous surfaces: Dilute 1/2 cup of Fabuloso Antibacterial in a gallon of sterile deionized water and apply to surfaces with a mop, cloth or sponge or apply directly to surfaces with a mop, cloth or sponge. Leave on surfaces for at least 5 minutes. No rinsing required.
That's because the chemicals in your floor cleaner leave behind a residue. Not only does this residue make your floors sticky, it can also lead to a cloudy appearance and discoloration on wood floors. Fortunately, you can follow these steps to remove floor cleaner residue.
Cleaning at night is often associated in many cultures with chasing out good vibes and blessings from the house. For instance, it's said in Hinduism that doing any kind of nighttime sweeping or mopping will enrage Lakshmi, the goddess of prosperity and wealth, and force her to leave the home.
Mop around the edges first, then move to the middle of the floor, using overlapping, figure-eight strokes. When one side of the mop gets dirty, turn the mop over to the clean side. When both sides are dirty, wash the mop in the bucket; otherwise, you'll be spreading dirt around instead of removing it.
Many cleaners spray a ton of floor soap, believing "wet equals clean." Then they forget to rinse out their mop pad, resulting in a floor mop that is fully saturated with dirty water. Continuing to use the mop pad on the floor leads to smearing dirt, not lifting it.
It's easy to believe that, to make something clean, you need to use chemicals. Surely you can't clean a floor with only water - can you? The answer is yes: it's been proven that water is often enough to clean efficiently when used in conjunction with a good auto scrubber.
Cleaning solutions: Use gentle, pH-neutral cleaners suitable for your specific floor type. Avoid harsh chemicals that can damage the surface. Broom and dustpan: Ideal for quick cleanups of dry debris. Microfiber cloths: Great for dust removal, polishing, and tackling spills.
The process of changing a liquid into vapour is called evaporation. The water present on the mopped floor absorbs heat from the room and becomes vapour. This process dries up the room. Hence, mopped floor dries up due to evaporation of water.
Any cleaning solution should be applied sparingly, and the floor should be dried immediately after mopping to prevent moisture from penetrating the wood.
Hot water is great for removing grease, stubborn dirt and caked-on residue. It is more effective in killing bacteria and germs. Hot water is a good choice for tile floors and vinyl. Be sure to check the manufacturer's instructions to make sure your floor is resistant to hot water.
Depending on the level of dirt on your floor, it could need a rinse with clean water after mopping it. If you skip this crucial part of the process, the floor could end up all sticky and smudgy.
The biggest and potentially most costly mopping mistake, according to cleaning experts, is using too much water on moisture-sensitive floors like hardwoods and laminates. "Excess water can warp your hardwoods and cause your laminates to bubble," says Melissa Homer, the chief cleaning officer for Microfiber Wholesale.
Mops can spread dirt, germs, and bacteria around rather than removing them. Studies show that mops can actually push dirt and microbes to other areas, leaving your floors less clean and potentially more contaminated.
High-traffic areas, like kitchens, bathrooms, hallways, and entryways, require weekly mopping. Infrequently used rooms, such as formal living areas or guest rooms, can be mopped every other week, or even once a month, so long as they're vacuumed once every seven days to remove dust and grit.
According to Vastu Shashtra, sweeping or mopping at night or after sunset brings bad luck to the house. Do not use a mop or broom at night if you wish to attract prosperity in the house. When you sweep or mop at night, it is believed that mopping or sweeping removes positive energy.
One of the main reasons why floors smell bad after mopping is that the mop is dirty or not well taken care of. Not cleaning and drying your mop after each use can allow germs, mold, and bacteria to grow.
This Fabuloso cleaner is easy to use, so there is no need to rinse, and it leaves no visible residue.
If you must use pine sol, I'd definitely follow with a clean water washing to remove residue especially for safety of animals and children.
Water + Vinegar + Vegetable Oil
If you're working with a wood floor, try adding half a cup of white vinegar and one teaspoon of vegetable oil to a cup of water[*]. Mix the components together and rub them on the floor with a cleaning rag, either covering the whole surface or just going for the occasional spot.